Added an option to disable and enable the continuous and optional
carrier functions in the nordic 802.15.4 driver.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
The nRF HW models have been updated to correspond to a 52833 instead
of a 52832. Let's follow them.
The motivation for the change is to enable proper BIS encryption support
(for BT LE Audio ISO).
Changes:
* Point in manifest to latest HW models
* SOC_COMPATIBLE_NRF52832 has been removed, and SOC_COMPATIBLE_NRF52833
added in its place (with no uses at this point)
* Where SOC_COMPATIBLE_NRF52832 was used to set encryption like for a 52832
(to avoid using the MAXPACKETLENGHT), we set the condition to just
SOC_NRF52832.
Note: The MAXPACKETLENGHT register exists in the new simulated nrf52833,
thought it does nothing.
* In the BLE ctrl LLL radio HAL, all macros are renamed accordingly
(timings are NOT changed).
* Board dts definition now refers to the 52833 soc definition. New 52833
features set as not supported by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The LCG method used earlier in the random number generator was problematic,
as the lowest bits repeated periodically (for example, the generated number
always resulted in an odd-even-odd-even-.. sequence, or the last three bits
formed an cycle of the length 8). This is because the LCG was done module
2^32. Any LCG using a power of 2 as the modulus will cause the same issue.
The used RNG method was changed to Marsaglia's xor shift-algorithm,
which does not have this issue.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Enabling by default (if SPI3 used) because it affects all revisions
since "Engineering B", including the most recent one as of today
(revision 3).
Size changes when enabled:
- -Og: flash +160 bytes (+0.02%), RAM +8 bytes (+0.01%)
- -Os: flash +144 bytes (+0.02%), no change to RAM usage
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Switch to use newest 2.10 API version in nrfx by default.
It changes signature of user callback in the nrfx_ipc driver.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Currently, the nrf-802154-spinel IPC service requires that the IPC
service node has a specific name (ipc0). This makes it impossible to
overwrite the IPC service node to be used by the Spinel serialization
without completely redefining the ipc0 node. Create a `chosen` property
called nordic,802154-spinel-ipc that can be reassigned with any IPC
service node.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit adds API version symbols. The symbol is used in nrfx
drivers, where new API-breaking changes are introduced. Symbol
guards conflicting API.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove modules/hal_nordic/Kconfig.dt as we now autogenerate the
contents of this file based on the dts bindings in tree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move the RX (MISO) delaying capability information to Devicetree. It is
done using 2 properties:
- rx-delay-supported: enabled on SPI nodes that support delaying RX.
This property can be used by the driver to determine if this
capability is supported or not on a given instance.
- rx-delay: the actual RX delay value
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
When the SYS_CLOCK_EXISTS Kconfig option is not enabled, k_busy_wait()
has no implementation, so in such case, call nrfx_coredep_delay_us()
directly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In order to bring consistency in-tree, migrate all modules code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change dependencies of the Kconfig options that enable particular nrfx
drivers so that the drivers and their instances are available when
a devicetree node with a corresponding compatible property exists,
no matter if it is enabled or not.
Change the options that enable compilation of multi-instance drivers
to be promptless helpers only (not directly configurable for users),
as they need to be enabled only together with some options that enable
particular instances of a given driver, and those options select them
as needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The intialization level of 802.15.4 on NET core was set to APPLICATION,
which caused some applications to break during initialization. Changed
it to POST_KERNEL. CONFIG_NRF_802154_SER_RADIO_INIT_PRIO default value
was adjusted.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Instead of including from nrfx_glue.h a specific Zephyr Bluetooth
controller header file that defines PPI and GPIOTE resources to be
reserved for exclusive use by the controller, include a file with
only a fixed name and expect the chosen Bluetooth controller to
provide the location of this file in include paths. This way, when
a different Bluetooth controller implementation is used downstream,
a different file can be easily pointed to.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently if an attempt to disable CSMA-CA in by setting an
appropriate flag in another (for example application)
CmakeLists.txt it caused lots of warnings. This fix allows
higher level CMakeLists.txt to disable CSMA-CA without
warnings.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
The nrf_802154_lp_timer_zephyr.c platform file is unused in the
opensource SL library variant.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Parameter `prio` of `nrf_802154_irq_init` is now allowed to have
negative value what means use of ZLI priority or highest possible
priority if ZLIs are disabled.
Signed-off-by: Andrzej Kuros <andrzej.kuros@nordicsemi.no>
This commit aligns nrf_802154_lp_timer_zephyr platform to new API of
nrf_rtc_timer. Moreover, it implements lp_timer synchronization
functions using the new nrf_rtc_timer API.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit aligns nrf_802154_lp_timer_zephyr platform to new API of
nrf_rtc_timer. Moreover, it implements lp_timer synchronization
functions using the new nrf_rtc_timer API.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This patch restricts access of CCA configuration related macros to
builds for which nRF 802.15.4 Radio Driver is enabled. This reduces
clutter and prevents misuse of CCA macros.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
Move all defines that specifies (D)PPI resources which are used
to dedicated files which have no include dependencies. This allow
to use them in nrfx_glue.h to specify fixed (D)PPI channels used
by the bluetooth.
Additionally, added mask with GPIOTE channels used by the bluetooth
controller. It was previously not defined which could lead to
conflicts since same channels could be allocated by the nrfx_gpiote
user
Updated nrfx_glue.h to use new approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Set NRF_SKIP_FICR_NS_COPY_TO_RAM for nrf53 and nrf91 until corresponding
memory region is excluded from use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx v2.6.0.
nrfx 2.6.0 includes extended API in nrfx_gpiote which can be
used by the zephyr shim.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use nrfx_gpiote and nrfx_ppi allocators to allocate channels
at runtime instead of fixed, device-tree based allocation which
is harder to maintain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add nrf51 MDK defines needed to correctly select the nrf51 erratas
needed on the specific SoCs. The nrf51_erratas.h header file only uses
these defines to check which erratas should be applied.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig options that allow users to select the way the APPROTECT
mechanism is handled in the SystemInit() function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit reworks nRF IEEE 802.15.4 temperature update module to save
resources, otherwise used to create thread, by using work queue.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit adds temperature platform used by the IEEE 802.15.4 Radio
Driver. The new platform requires an enabled temperature sensor.
The new hal_nordic revision updates the nRF 802.15.4 component.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
The nRF SOCs declare support for SWO using the HAS_SWO define. In
addition, the SWO pin has to be configured at runtime, which is done
through the Nordic HAL by defining ENABLE_SWO.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update revision of hal_nordic which introduces new radio driver
integration scheme.
The glue cmake has been updated to use the new integration scheme
for the nrf-802154 component.
Added config option to exclude radio driver in hal_nordic from the
build process. This allows the radio driver to be supplied from
other sources.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
