Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch activates FPU feature for main thread if FPU related
configs (FPU, FPU_SHARING) are enabled.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Move banner and boot delay handling out of init.c
The code for banner was all over the place in init.c making it
unreadable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This uses the timing functions to gather execution cycles of
threads. This provides greater details if arch/SoC/board
uses timer with higher resolution.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Zephyr SMP kernels need to be able to run on architectures with
incoherent caches. Naive implementation of synchronization on such
architectures requires extensive cache flushing (e.g. flush+invalidate
everything on every spin lock operation, flush on every unlock!) and
is a performance problem.
Instead, many of these systems will have access to separate "coherent"
(usually uncached) and "incoherent" regions of memory. Where this is
available, place all writable data sections by default into the
coherent region. An "__incoherent" attribute flag is defined for data
regions that are known to be CPU-local and which should use the cache.
By default, this is used for stack memory.
Stack memory will be incoherent by default, as by definition it is
local to its current thread. This requires special cache management
on context switch, so an arch API has been added for that.
Also, when enabled, add assertions to strategic places to ensure that
shared kernel data is indeed coherent. We check thread objects, the
_kernel struct, waitq's, timeouts and spinlocks. In practice almost
all kernel synchronization is built on top of these structures, and
any shared data structs will contain at least one of them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes races where threads on another CPU are joining the
exiting thread, since it could still be running when
the joiners wake up on a different CPU.
Fixes problems where the thread object is still being
used by the kernel when the fn_abort() function is called,
preventing the thread object from being recycled or
freed back to a slab pool.
Fixes a race where a thread is aborted from one CPU while
it self-aborts on another CPU, that was currently worked
around with a busy-wait.
Precedent for doing this comes from FreeRTOS, which also
performs final thread cleanup in the idle thread.
Some logic in z_thread_single_abort() rearranged such that
when we release sched_spinlock, the thread object pointer
is never dereferenced by the kernel again; join waiters
or fn_abort() logic may free it immediately.
An assertion added to z_thread_single_abort() to ensure
it never gets called with thread == _current outside of an ISR.
Some logic has been added to ensure z_thread_single_abort()
tasks don't run more than once.
Fixes: #26486
Related to: #23063#23062
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Certain architectures, such as ARM Cortex-M require a custom
switch to main(), in case the case we build Zephyr without
support for multithreading (CONFIG_MULTITHREADING=n). So as
to keep the change to kernel/init.c as unintrusive as
possible, we install an ARCH-specific hook in z_cstart(),
which gets called for architectures that require this
customized switch to main() function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This now takes a stack pointer as an argument with TLS
and random offsets accounted for properly.
Based on #24467 authored by Flavio Ceolin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- simplify dummy thread initialization to a kswap.h
inline function
- use the same inline function for both early boot and
SMP setup
- add a note on necessity of the dummy thread even if
a custom swap to main is implemented
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
C++ is documented to be supported in applications, so it should be
supported in SYS_INIT() functions run at the application init level.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_CCM_* macros to use DT_CHOSEN(zephyr_ccm) and
associated macros from devicetree.h.
We remove CCM references from cortex_a and cortex_r linker scripts as
its only a feature on Cortex-M STM32 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_DTCM_* macros to use DT_CHOSEN(zephyr_dtcm) and
associated macros from devicetree.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds a sys init level which allows device and sys_init
to be done after SMP initialization, z_smp_init(), when all
cores are up and running.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This function had a to sys_rand_get() even without random source. As
Zephyr is built with linkage garbage collection and this function is
called only if either ENTROPY_HAS_DRIVER or TEST_RANDOM_GENERATOR is
enabled and these options automatically enable a random source.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Only dump data when we are interested in the analysing coverage. By
default just collect the data.
CONFIG_COVERAGE_DUMP is used to control this behaviour.
This will help speed up sanitycheck and will avoid lots of noise in the
log when some tests with coverage enabled failed. Dumping data to
console is also suspected to be one of the reason why qemu hangs in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original implementation left this function hidden in init.h which
prevented it from showing up in documentation. Move it to kernel.h,
and document it consistent with the other functions that allow caller
customization based on context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We have been using thread, th and t for thread variables making the code
less readable, especially when we use t for timeouts and other time
related variables. Just use thread where possible and keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just use printk directly instead of going over defines.
For some reason, this change lets us pass on master when running
tests/kernel/timer/timer_monotonic test. This test started failing after
rc2 was tagged, just because the changing git version string passing to
BUILD_VERSION. This is still under investigation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some platforms the size of size_t can be different of 4 bytes. Use
sys_rand_get to proper fill this variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are renamed to z_timestamp_main and z_timestamp_idle,
and now specified in kernel_internal.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
