Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All of these stubs at the end pop the stack and tell the LOAPIC
that we are at EOI. Put this in common code which falls through to
_IntExit(). Saves 8 bytes per static IRQ stub. There is also small
constant savings in the common code for dynamic IRQs.
Change-Id: If17e9f105928a4251a2cb3fc0d192649c1c4d84b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Quark SE Lakemont core has a hardware bug where the LOAPIC does
not properly notify the IOAPIC to clear the IRR bit for level-
triggered interrupts.
This patch introduces a workaround where the vector ID of the
in-service interrupt is manually written to the IOAPIC_EOI
register, resulting in the bit being cleared.
Unfortunately, in the context where EOI happens it's very difficult
to identify which IRQ line is being serviced, so this is done
unconditionally for all interrupts vectors whether they are registered
in the IOAPIC RTE table or not.
Change-Id: I639cd258dec4f50934e17eadbb821e6a7112e636
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initialization and usage of nano semaphore require an actual semaphore
object in memory. So make sure the semaphore is there.
Change-Id: I4a7391973c65f99132735133b82f1e3837eab4f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of the convenience wrapper for timers as well as
nano_timer_init(), nano_timer_start(), etc...
Change-Id: I256e16682e5520eac2b590afcaf00df8b6e8ffd6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was only needed for an older implementation of software interrupts,
now superseded by the irq_offload() API (which doesn't interact with
the interrupt controller at all)
Change-Id: I8aa696d370ae1799872f6d70de69f3cb5b47456a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use defined(__clang__) otherwise it might fail in some cases.
Change-Id: Ifb2e1cd971325e2a7f87e530e5ee921a5fcee6b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Other internal functions are shown in this header, no reason to
keep this a secret.
Change-Id: Icb7d36206148c281f1960d1ac10368d9bb3033f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that i2c is fully synchronous on top of an interrupt based
implementation, polling mode can be removed. Applying the API change
into the existing drivers.
Change-Id: I05d2a6089743b6b69f7c9da6312057134578e2f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Those empty C files are there because the current Kbuild
requires Makefile to be present at those directories,
(due to arch/x86/Kbuild), which requires building some object
files. So the empty source files are there to produce empty
object files to satisfy this.
Change-Id: I14056347ea14cff227d9e8960192e8673c0019b8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1d379068f64855d5d4595838040ec50f97f638a0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1af8b2888779b2b58367feaff9ee1a6d97b4873c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables getting by host connection complete event and handle
internal state of related to the event connection object.
Change-Id: Ie6252ff33cc2e1fff5a4ce746fda7c3a59bf8aab
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
To conform to API convention rename BT_CONN_TYPE_BREDR to BT_CONN_TYPE_BR.
Updates stack code so far uses it.
Change-Id: Ia759ef68bbdb232e3b0992740e0536d310e19010
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applications may want to protect the privacy (identity of the local
device). One way to do this is to generate a Non-resolvable Private
Address and use that when advertising.
Change-Id: Ib852b03c14af062f914aa99a14e50c2e52ac78c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no reason for us to go revealing our public address when doing
active scanning.
Change-Id: I27bed74bb377b8bba75843ea76acb8f0d58f70f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Once we start persistently storing the addresses of devices we want to
reconnect to we also need a way to reload them to the stack. Since we
don't have a connection object at this point the API cannot take that
as a parameter. Instead rename the function and have it take
bt_addr_le_t as a parameter.
The feature was also lacking proper reference counting for the
connection, which this patch now adds (the flag itself owns a
reference). The function is now also possible to call before bt_init()
so that if we load the stack with multiple devices the HCI doesn't get
bombarded with lots of scan enable/disable commands.
Change-Id: I9072bf061eb64f2ecec96f74fb176be13e5bdaee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the app can start passive scanning if it wants.
Change-Id: Iab3e60863d5a1a013a5f069a98664628c7b14418
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses BT_UUID_DECLARE_16 in macros that can only be of 16 bits
format.
Change-Id: I45d4bcca9859a2e279b1199546891df75a039589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to declare 16 and 128 bits UUIDS and also save space
in case of 16 bits.
Change-Id: I5790afd9504ee0cca4a951be6bc542685d0a35fb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
