gatt.h API depend on bt_uuid so make use uuid.h is always included.
Change-Id: If9d4e5a668ac4e0b167eda8fe41e8b4810dfe298
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_discover can be used to discover primary GATT service by UUID in
a selected handle range, after it attribute found the function callback
is called so the user can interact the attribute found and decide to
continue to the next or stop.
Change-Id: I37514f00c82ce5520d7a14757a6ff12ee34f0736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add infrastructure and checks to validate the net_mbuf during
its lifecycle.
Change-Id: Id4b638fff991325d2247b1f24152552038888915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add macros that check that we are not trying to use already
freed net_buf and vice versa.
Change-Id: Ifdb6a7e24cd6d7a0de46fa7b991c358ea8828d6f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Making sure we do not include anything unless they
are inside include guard.
Change-Id: Ie88cbc0ed6dbbf4033f3c8c310df7d084ab8b126
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_reply() can be used if the application wants to reply
something to peer right after receiving the data. The function
will reverse the source and destination addresses and ports,
and set the uIP internal structures in such a way that the
reply is possible. Using this function saves the application
from allocating a separate net_buf for just sending simple
message back.
Change-Id: Ia960c83b77a8f300222159ee085fed99e2b007c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the Command Complete status is read, this status shall be returned.
Change-Id: Ic3fe102c16da4b01d002a2d39952fd401e9f832d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_exchange_mtu can be used to exchange MTU used by GATT, the MTU
is selected automatically based on the amount of data bt_buf can hold.
Change-Id: Id49a506663d922132e81c0a753a983b93579ffd0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The revised name conforms to Zephyr OS naming conventions.
Change-Id: I5bcdaf1df7da9d8ce5787a08b29ead91dd8f24ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing the parameter to timer_driver() as it is not used.
Change-Id: I09275287eeb541be0dd315056b4f2bc6cbc2573c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all occurances of /*! to /** to match javadoc
style.
Change-Id: I3a759d34e0e928216f61252682266e64c5b875f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds HCI routine to cancel creation of outgoing connection.
bt_disconnect is called to cancel connection or disconnect based on current
connection state.
Change-Id: I462a61308a580bb24aa9a6c398eb7e443b995655
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This was same as low security and is not needed. This also match
security levels with LE Mode 1 security level from Core Specification.
Change-Id: Ia82e1f4d94c281d7e7f88f03a16a1e34eb49f710
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This command will be used to enable encryption when acting as master.
Change-Id: Iaaf1d5b98bfcfcf17a5cc7006a6c40d0905011fd
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds bt_conn_security function that can be used to elevate
security on connection. If device is not paired it will trigger
pairing first.
For now only JustWorks pairing is supported so full security level
tracking is not needed as only medium level is supported.
Change-Id: I6d344f55286a79bd989bd18f852a6859dc8ea96a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
6lowpan HC06 and HC01 compression/uncompression functions are
adapted to net_mbuf buffers. HC06 compression and uncompression
works properly. HC01 adapted to net_mbuf but functionality is
failing due to inproper IPv6 link local addresses. buf pointers
from net_mbuf and couple of net_mbuf calls are removed (which
are not used at the moment and saves memory from net_mbuf).
Change-Id: I2711b71b1b8df2eaac67d69275baf4b62b03f9f6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed for enabling RPL and 6lowpan support.
Change-Id: I87f95a08db2cc874bbe841d9b1456803ab16d75d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the bigger members are always list first in non-packed
struct to minimize the use of padding for alignment by the compiler.
Change-Id: I64419e9b27f4e7d3abb4eeb0ef2a88beda5b22e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move packetbuf from net_buf to net_mbuf, update 802.15.4 stack
with net_mbuf (which is smaller in size, and mostly wrapper for
packetbuf) and split sicslowpan(ipv6/sicslowpan.c|h) functionality
to compression and fragmentataion. This patch contains
null_compression and null_fragmentation which is exactly what
uip_driver.c|h does.
Change-Id: Ifee359e20aa57a50fb00c9ce049d9476b2ac67e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After an IP packet has been (reassembled and) received, the driver
submits the IP packet to the IP stack.
Change-Id: Icbd1e7740ce59db16bc1d61002420e86ab101d2d
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We do not need large 1280 bytes long buffers in lower IP stack
layers. After long packet has been fragmented to smaller chunks
it depends on the radio technology how long buffers we need
to use. For 802.15.4 we can use 128 bytes long buffers.
Change-Id: I8cd6085944d78fa26a4aa1a93c58fc436856541b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uip_len(buf) cannot be used as the Contiki stack zeroes
the buffer len after sending and after processing received packet.
Thus the application can use uip_appdatalen(buf) macro to get
the application data length.
Change-Id: Iaaa508acb96c28919cfc0188ef46bb2b4a693090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This header defines the public API for I2C drivers and the I2C
driver interface.
Change-Id: I7ed19c0f2a13a34bbaf35b50b648b73b5570bbd7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This header defines the public API for GPIO drivers and the GPIO
driver interface.
Change-Id: Ibd9c1065cda4691c3ab9920fd7a5e2aa178e4f4b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Using the symbolic names in the macros fails to create the correct
object. Likely due to the order of evaluation by cpp. Back out this
change.
Change-Id: I3948228ecdab3c1087faf6e9dc9f25455ed63e7a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is helpful when working with UART through dynamic
interrupt stubs.
Change-Id: I91d64f575aa755fcfd894d678a1c078219447f16
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add the call sites for the various init levels defined by the init
system.
These call sites are noops if there is no init proceedure registered
at a given init level.
pre_app_init has been renamed to app_early_init and late_initconfig to
app_late_init to better reflect the ordering and intended use of these
init levels
Change-Id: I71e38d936a97da8fe163f4b7cf0ce6725f1c903e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The kernel version has been converted from a string to a four-byte
quantity that is divided into two parts.
Part 1: The three most significant bytes represent the kernel's
numeric version, x.y.z. These fields denote:
x -- major release
y -- minor release
z -- patchlevel release
Each of these elements must therefore be in the range 0 to 256, inclusive.
Part 2: The least significant byte is reserved for future use.
EXTRAVERSION is used for intermediate releases and customised
builds on top of an existing/released version.
Change-Id: Ibb7dd5654c36daeaa3a53499857d254aaef25bdf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The revised name better reflects the fact that the file defines
macros in addition to declaring variables. In addition, most of
these APIs use the "sys_clock_" prefix, which aligns well with
the new file name.
Change-Id: Ib33517d4b19ec2455303b87200c677e87640fcbc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I608404a762cf9d1100d58fe80c82c0e40ada2ff1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I6c2cacff68d150eaea5d118d582c5f8246911924
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: I1e9bf3dc25de537cecb679e0e0b27e5f54b2aa13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: Ibe1de0dca3488a2a38b620ff0e74e253d8da8d35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now spells out the name of the associated microkernel object in full.
Change-Id: Iee532e9fbbcafbf9ba44c91de0894b7181285e8e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This file defines public microkernel APIs that are utilized
by more than one of the microkernel object types. It contains
both types and symbolic constants.
Change-Id: I2bc39ffe6655e5ddeec1e55c4caee01e02526595
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
