These symbols have the same name as the symbols from lib QMSI, which
causes a compilation failure, when lib QMSI is used.
This replaces the offending symbols with names which are more consistent
with the rest of the file (rtc_ prefix).
Change-Id: I288a1a229bf0b40f3b6fc8ffb35c502f998054b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds 2 new APIs to the serial/uart drivers:
() One is to control the serial line, such as RTS and CTS.
() Another one is to allow driver to expose hardware specific functions
to apps. This is needed as some hardware may have extra registers to
set for baud rate.
To keep the code size small, these features are disabled by default.
Change-Id: I15c000ce68a0a490dcfd3493b2fe9bc51fa974fa
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the baud rate and options fields out of the UART driver
config struct and into the driver data struct. This will allow
changing baud rate and options at runtime in the future.
Change-Id: I62ddea2f95e634f2d60eeb9537f960799fc9301f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The routines _int_latency_start() and _int_latency_stop() have been
replaced by macros that evaluate to nothing when the kernel config
option INT_LATENCY_BENCHMARK is not enabled thereby giving a performance
boost to the x86 versions of irq_lock() and and irq_unlock().
Change-Id: Iabfa7bf001f5b8396e7bcf5eebd6b1aa342bac46
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Note that the A->Comm is a pointer to the microkernel functions,
and thus is highly probable that the high 8-bit is occupied.
Therefore adds a new field in the monitor struct to store the pointer.
Change-Id: I7bcb34108c89a97cc38b2ac411ae4139b62786f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extending the public interface of the pinmux to allow the end user
to set a pin as an input/output and to pull up the value on
a specified pin.
Change-Id: Ie0a3b6432dd8c7d7a02f32e3d22049bdd99f1410
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes some outdated or invalid comments and adds some
clarification of GATT Discovery procedure.
Change-Id: I91994917bea246a2d112df65123a3e6dec42ee92
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to conveniently start passive scan from central
applications.
Change-Id: Idf470be747ab7c6e7413cc368227b0b69e7b78a4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When the BLE GAP service needs to declare the preferred connection
parameters.
Change-Id: Iff8a6f68f2dfe478c44dcc5a3e95abda271ecc00
Signed-off-by: Louis Caron <louis.caron@intel.com>
Asynchronous functions use the parameters to store relevant data even
after the scope it has been called which means they have to remain valid
while the operations are in course.
Change-Id: I2cc79e5ce352fef4e077e9fb4cb0f4d111463d00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces bt_uuid_copy which can be used to copy UUID values.
Change-Id: I22d996bcace454769ac871a43b9acebe8b23db39
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enables get basic connection info support for non-LE connections.
Change-Id: If295b552567886256cfc1e215bfe3149d2f1f60c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Gets included authentication API in BR/EDR variant
Change-Id: I4fa55bb3baa8db79f6e9f5f1c65c0d93f8f8780a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
BT_STACK depends on BT_STACK_DEBUG_EXTRA, therefore moving it there.
It also allows to use BT_STACK in drivers, at the moment only
Bluetooth stack uses it.
Change-Id: I41e0e0d49dae6abef2dc3a8d1d109127787d3db0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add basic color logging support. Error logs will be printed in red
whereas warn() logs in yellow. The support is behind a Kconfig option
in case someone needs to build the stack for a terminal that doesn't
support the ANSI color codes.
Change-Id: I080e32db68f87e81f1bb54aa4c634f7cd38f1e33
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code to poke the system integration module to disable clock gating
for UARTs only works for UART0-3 since all the bits are in the same
register. However, clocks for UART4 and UART5 are controlled by
another register. This means that we have been writing to the wrong
bit for enabling UART4.
This patch fixes this issue, and moves the clock gating clock into
board initialization. The incorrect code has also been removed to
prevent accidental mis-use. The dev_data struct is no longer needed
for uart_k20, so that is removed as well.
Change-Id: I67845a417e43647bf0ffcbdbda34ce68fa887713
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
