Each work_q object gets a separate spinlock to synchronize access
instead of the global lock. Note that there was a recursive lock
condition in k_delayed_work_cancel(), so that's been split out into an
internal unlocked version and the API entry point that wraps it with a
lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The validation checking recently added to spinlocks is useful, but
requires kernel-internals like _current and _current_cpu in a header
context that tends to be needed before those are declared (or where we
don't want them declared), and is causing big header dependency
headaches.
Move it to C code, it's just a validation tool, not a performance
thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We want a _Swap() variant that can atomically release/restore a
spinlock state in addition to the legacy irqlock. The function as it
was is now named "_Swap_irqlock()", while _Swap() now refers to a
spinlock and takes two arguments. The former will be going away once
existing users (not that many! Swap() is an internal API, and the
long port away from legacy irqlocking is going to be happening mostly
in drivers) are ported to spinlocks.
Obviously on uniprocessor setups, these produce identical code. But
SMP requires that the correct API be used to maintain the global lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Since we know do DTS before Kconfig we should try and remove dts from
creating Kconfig namespaced symbols and leave that to Kconfig. So
rename CONFIG_CCM_<FOO> to DT_CCM_<FOO>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add HID Device associated with the instance of the HID. This allows to
create several HID instances for multifunction composite device.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new status callback with usb_cfg_data parameter to be able to
identify instance callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add interface parameter to interface configuration callback to be able
to configure several instances of the same class.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CONFIG_APPLICATION_MEMORY doesn't exist anymore, so the bit of code in
arm_core_mpu_dev.h related to it is dead and should be removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Patch introduces flash_map subsystem to operate on flash
image instead of direct operation using flash_driver API.
Changes allows to support operation on the image in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
Patch introduces flash_map subsystem to operate on flash
footprint instead of direct operation using flash_driver API.
Flash area ID is used in API instead of direct flash-bank-offsets.
Changes allows to support operation on the partition in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
The power management framework used two different abstractions
to describe power states. The SYS_PM_* given coarse information
what kind of power state (low power or deep sleep) was used,
while the SYS_POWER_STATE_* abstraction provided information
about particular power mode.
This commit removes the SYS_PM_* abstraction as the same
information is already carried in SYS_POWER_STATE_*.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The convention is that implementation of any Socket API function
lives in zsock_*(), and then it's optionally aliased to bare POSIX
name if requested. This convention must be followed to get proper
integration into the general POSIX subsystem.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The transport number is used to pick elements of an array which is
initialized using #if defined macros. Having explicit numeration in this
enum leads to situations where the array index is different than the
enum value.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Newlib now defines a special z_newlib_partition containing
all globals relevant to newlib. Most of these are in libc.a
with a heap tracking variable in newlib's hooks.
* Both C libraries now expose a k_mem_partition containing the
bounds of the malloc heap arena. Threads that want to use
libc malloc() will need to add this to their memory domain.
* z_newlib_get_heap_bounds has been removed, in favor of the
memory partition for the heap arena
* ztest now includes the C library partitions in its memory
domain.
* The mem_alloc test now runs in user mode to prove that this
all works for both C libraries.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* K_APP_DMEM_SECTION/K_MEM_BMEM_SECTION macros now exist
to specifically define the name of the sections for data
and bss respectively.
* All boards now use the gen_app_partitions.py script, the
padding hacks for non-power-of-two arches didn't work right
in all cases. Linker scripts have been updated.
* The defined k_mem_partition is now completely initialized
at build time. The region data structures now only exist
to zero BSS.
Based on some work submitted by Adithya Baglody
<adithya.baglody@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a separate data section which needs to be copied into
RAM.
Most arches just use the kernel's _data_copy(), but x86 has its
own optimized copying code.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The function to set channel alarm is called counter_set_channel_alarm.
To match the name of the function performing the reverse operation this
commit renames counter_disable_channel_alarm() function to
counter_cancel_channel_alarm().
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The scatter/gather API for I2C assumes that all SoC implementations are
capable of supporting such operations, in particular performing a single
write (read) transaction that transfers from (to) multiple addresses in
memory. This is not the case: for some driver implementations a write
of a device register address followed by a write of data to be stored in
that register will produce two bus transactions and be mis-interpreted
by the receiving device.
Extend the documentation of the I2C message flags to provide more
information about the breadth of implementation variation in their
interpretation.
i2c_burst_write cannot be deprecated because we have no replacement.
Clarify in the description that the behavior is not portable.
i2c_burst_read is not being deprecated because it is in use throughout
Zephyr. The description is updated to reflect that it can be replaced
by i2c_write_read().
Deprecate unused convenience wrappers that depended on the burst APIs
but were never used in the tree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
It is commonly necessary to execute a pair of I2C transactions where the
first is a write transaction that identifies information held on the
device and a second is a read transaction that retrieves the identified
information.
Add API that performs this operation generically, without restricting
the type or size of the identification or content messages. Follow the
argument order of the existing i2c_write and i2c_read methods.
This reduces the need to explicitly construct buffers for i2c_transfer,
or to use more restrictive API functions that perform a gather write
that is not reliable on all I2C bus driver implementations.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Renamed:
- counter_set_wrap to counter_set_top_value
- counter_get_wrap to counter_get_top_value
- counter_get_max_wrap to counter_get_max_top_value
Updated nRF implementations and counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modify alarm callback to return user_data and channel_id.
Set_alarm and disable_alarm updated accordingly. Renamed
counter_*_ch_alarm to counter_*_channel_alarm. Updated test
and nrf implementations.
Updated doxygen comments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
counter_callback_t has been previously prefixed with __deprecated
but it is used in prototype of deprecated function (counter_set_alarm).
It seems that compiler generates the warning even though function is
not used. Removed __deprecated prefix from the typedef, keeping it for
the function only.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecating counter legacy API and renaming new counter_set_alarm
to coutner_set_ch_alarm. Deprecating rtc API and modifying rtc
API to call new counter API (compatibility layer).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
counter.h and rtc.h API's share almost the same functionality.
They are unified as a new counter.h. rtc.h will be deprecated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adds a new entry in the pixel format enum for RGB 565. This will be used
for the lcd display on the mimxrt1050_evk and mimxrt1060_evk boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Replace Cortex-M3 with Cortex-M architecture family
in the header documentation of kernel_arch_data.h and
kernel_arch_func.h, which are generic header files for
the entire familty of ARM Cortex-M CPUs. The commit
adds some more minor style fixes in functions'
documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the documentation of internal ARM core
function _arch_irq_lock(..), adding a more detailed description
of its impact on the different Cortex-M processors.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This Patch add functionality for automatic generation of the flash map
using DTS description. Automatic generation allows to replace
C-hardcoded flash_map.
We generate a set of defines based on the index of a partiion:
#define DT_FLASH_AREA_<IDX>_OFFSET 0
#define DT_FLASH_AREA_<IDX>_SIZE 131072
#define DT_FLASH_AREA_<IDX>_DEV "FLASH_CTRL"
#define DT_FLASH_AREA_<IDX>_LABEL MCUBOOT
Additionally we also define:
#define DT_FLASH_AREA_NUM 4
and:
#define DT_FLASH_AREA_<PARTNAME>_ID 0
Signed-off-by: Findlay Feng <i@fengch.me>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the value 0 is a valid network interface index, we cannot use
unsigned value for interface index as that would not allow to
distinguish an invalid value. So make interface index a signed
8-bit value which is ok as we do not expect to have more than 127
network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds PF_CAN and AF_CAN protocol family identifiers
that are used by BSD socket CAN support code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
This commit adds basic packet socket support to net_context and
allows application to receive or send network packets in raw
format.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Various defines and helpers for supporting packet sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add ETH_P_xxx protocol types if they are missing. After this
we can use the protocol types when working with BSD sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Translate HCI error codes to POSIX error codes in order to be able to
distinguish reason of connectable advertising start failure.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
This commit enables fine-grained power state locking.
Now, each power state could be independently enabled or disabled.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
add the handling of APP_SHARED_MEM.
privileged threads can access all the mem
explictly defined in user mode, i.e., APP_MEM & APP_SHARED_MEM
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
