This enables the ACPI_EC1 interface which is typically accessed
through ports 0x6A0 and 0x6A4 in Bios.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
For iterable areas defined with Z_STRUCT_SECTION_ITERABLE(),
the corresponding output section in the linker script is just
boilerplate. Add macros to make these definitions simpler.
Unfortunately, we have a fair number of iterable sections not
defined with Z_STRUCT_SECTION_ITERABLE(), this patch does not
address this.
The output sections are all named <struct name>_area, update
sanitylib.py with this.
sys_sem with no userspace, and k_lifo/k_fifo are special cases
where different data types that are all equivalent need to be
put in the same iterable area. Add
Z_STRUCT_SECTION_ITERABLE_ALTERNATE() for this special case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently this is useful only for some internal applications that
iterate over the device table, since applications can't get access to
a device that isn't ready, and devices can't be made unready. So it's
introduced as internal API that may be exposed as device_ready() when
those conditions change.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several shell modules use cloned code to iterate over all devices and
identify the nth instance that meets some criteria. The code was
repetitive and included various errors. Abstract to a helper function
that performs the check consistently.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The existing minimal ACPI implementation was enough to find the MADT
table for dumping CPU info. Enhance it with a slightly less minimal
implementation that can fetch any table, supports the ACPI 2.0 XSDT
directory (technically required on 64 bit systems so tables can live
>4G) and provides definitions for the MCFG table with the PCI
configuration pointers.
Note that there is no use case right now for high performance table
searching, so the "init" step has been removed and tables are probed
independently from scratch for each one requested (there are only
two).
Note also that the memory to which these tables point is not
understood by the Zephyr MMU configuration, so in long mode all ACPI
calls have to be done very early, before z_x86_paging_init() (or on a
build with the MMU initialization disabled).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for a C11-style aligned_alloc() in the heap
implementation. This is properly optimized, in the sense that unused
prefix/suffix data around the chosen allocation is returned to the
heap and made available for general allocation.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Macro GET_ARG_N is geting nth argument from the variable list provided.
GET_ARGS_LESS_N returns argument list without n first arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Pointer to flash_parameters have been added to nvs_fs structure and it
is no longer needed to store write_block_size within the nvs_fs.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
With addition of flash_parameters structure, and supporting API call
to retrieve it, it is no longer needed to store write_block_size as
a part of flash_driver_api and it should be part of flash_parameters.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds flash_get_parameters call to API that returns pointer to structure
describing flash parameters.
Currently only erase_value parameter is provided via the structure.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This header provides one public API function, but lacked the
annotations necessary to process it when generating documentation.
Also detailed documentation was provided in Z_INIT_ENTRY_DEFINE which
is an internal function excluded from documentation.
Add the necessary directives to include SYS_INIT() in generated
documentation and move the description of the level and prio
properties to it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
PCIe End Point can get three different reset interrupts from the
Root Complex, Function Level Reset (FLR), PCI Express Reset (PERST)
and Inband PCI Express Reset (INB PERST).
Add public API to let PCIe EP drivers register callback function
for each PCIe reset interrupt. This callback function should be
executed from corresponding reset interrupt handler if registered.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
It may be useful for the application to register its own callback for
ot state changed event which does not override the current one.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
It may be useful to start openthread manually but with default
network settings. For instance when the application wants to register
ot state changed callback which should be done before openthread
starts.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This struct is taking up most of the heap's constant footprint overhead.
We can easily get rid of the list_size member as it is mostly used to
determine if the list is empty, and that can be determined through
other means.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We already have chunk #0 containing our struct z_heap and marked as
used. We can add a partial chunk at the very end that is also marked
as used. By doing so there is no longer a need for checking heap
boundaries at run time when merging/splitting chunks meaning fewer
conditionals in the code's hot path.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The library supports the declaration of JSON arrays as both nested and
top-level elements. However, as the provided encoding functions
json_obj_encode() and json_obj_encode_buf() interpret all input
structures as objects, top-level arrays are encoded as
{"<field_name>":[{...},...,{...}]}
instead of
[{...},...,{...}].
Add new functions json_arr_encode() and json_arr_encode_buf() that
enable top-level JSON array encoding.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Add options for phy update procedure. User can now set no preference
option for a particular PHY as well as preference for LE Coded PHY
coding scheme.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since this is an experimental API and MACRO_MAP() was deprecated in
favor of FOR_EACH() in zephyr v2.3.0, we are within our rights to just
remove it without notice now. Do so and mention it in the release
notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the repetitive definitions used to add and subtract 1 at
preprocessor time into their own file. Make the behavior consistent,
so that you can invoke UTIL_INC(x) for any x you can invoke
UTIL_DEC(x) on.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Previously, DTS specification of physical RAM bounds did not
correspond to the actual bounds of system RAM as the first
megabyte was being skipped.
There were reasons for this - the first 1MB on PC-like systems
is a no-man's-land of reserved memory regions, but we need DTS
to accurately capture physical memory bounds.
Instead, we introduce a config option which can apply an offset
to the beginning of physical memory, and apply this to the "RAM"
region defined in the linker scripts.
This also fixes a problem where an extra megabyte was being
added to the size of system RAM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There were two spots where CONFIG_TIMEOUT_64BIT wasn't being correctly
honored, leading to the possibility of long timeouts overflowing
internally and doing weird stuff.
Fixes#26248
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Try to define MAX_FILE_NAME to the appropriate max length based on the
selected filesystm. Otherwise fallback to a standard filename of 12
(made up of 8.3 : <filename>.<extension>)
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
Since CONFIG_NET_BUF_USER_DATA_SIZE was not defined when
CONFIG_NET_BUF=n, compilation would fail on struct net_buf.user_data.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
When compiling network subsystem, I was getting the following compiler
warning:
```
In file included from /home/markus/src/wrp-n4m/zephyr/include/net/net_if.h:29,
from /home/markus/src/wrp-n4m/app/src/main/node/main.cpp:20:
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:80:32: warning: unnecessary parentheses in declaration of '__net_l2_OPENTHREAD' [-Wparentheses]
80 | #define NET_L2_GET_NAME(_name) (__net_l2_##_name)
| ^
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:82:29: note: in
expansion of macro 'NET_L2_GET_NAME'
82 | extern const struct net_l2 NET_L2_GET_NAME(_name)
| ^~~~~~~~~~~~~~~
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:114:1: note: in
expansion of macro 'NET_L2_DECLARE_PUBLIC'
114 | NET_L2_DECLARE_PUBLIC(OPENTHREAD_L2);
| ^~~~~~~~~~~~~~~~~~~~~
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updated rx_disable() description so that RX_RDY event is generated
after calling rx_disable. It contains data received prior to abort.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Support PLL for Higher Frequencies 80,160,240 MHz
- Support XTAL Frequencies 26MHz, 40MHz
- Clock Driver can't be disabled, because all of the other drivers
will depend on it to get their operating Frequency based on chosen
clock source (XTAL/PLL).
- Add needed references to BBPLL i2c bus ROM functions.
- Add `rtc` node to Device Tree.
- Since All Peripherals Frequency is depending on CPU_CLK Source,
`clock-source` property added to CPU node
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
If CONFIG_THREAD_NAME is enabled, we must use log_strdup() when
printing the thread name.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to follow threads by name in the debug output,
output a thread name if CONFIG_THREAD_NAME is enabled.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Clarify that number of bytes_written means bytes number of bytes
written belongs to the user's payload.
Added API note for emphasize that any flush write should be
the last write operation in any writes row.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce common API to achieve data transfer using memcpy
to/from outbound region of PCIe EP.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
