Bind WiFi network devices to the generic WiFi connectivity backend if
the appropriate option is set.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Decouple interface and Wi-Fi APIs, Wi-Fi APIs are common independent of
Wi-Fi offload or implemented natively (This is preparation for
introducing Native Wi-Fi).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Default scan mode is Active. User can force the scan mode to passive
through Kconfig option or using 'passive' option from shell.
Using either of this option will override regulatory settings and
forces all scan channels to be passive only.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
wifi drivers that depends on native ethernet stack cannot perform
wifi API calls missing availability. This changes adds the ethernet_api
interface in wifi_mgmt so that it becomes possible.
Naming "offload" in "struct net_wifi_mgmt_offload" is kept because
Zephyr still has no supplicant to handle a full non-offloaded driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Instead of keeping a boolean informing whether a network interface is
offloaded at socket layer or not, keep a pointer to a function which
allows to create an offloaded socket. Native interfaces keep this as
NULL, while for offloaded interfaces it allows to connect an offloaded
socket implementation with an interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 support was not fully implemented in the driver and was disabled.
This commit completes the implementation and enables it when
configured.
Signed-off-by: Vincent Wan <vwan@ti.com>
Fix typo in logged Kconfig option name that is missing in used
configuration. This one was mostly problematic for developers wanting to
find such option in source tree using grep - NET_SOCKET_OFFLOAD was not
found in Kconfig files.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove unnecessary calls to net_if_ipv4_addr_add() and
net_if_ipv4_set_gw(), to prevent link errors when CONFIG_NET_NATIVE
is set to n.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The SimpleLink wifi driver enables the Fast Connect method of
WiFi provisioning, which allows the network coprocessor to
reconnect to a previously connected Access Point (AP) on
startup.
Previously, if Fast Connect failed to connect, any network
socket applications would inevitably fail, as there would have
been no wifi connection.
This patch adds a configurable timeout for the Fast Connect
feature, after which timeout, an error is logged informing
the user to manually reconnect to an AP.
Reconnection is typically accomplished by separately running the
wifi sample shell program.
Fixes: #11889
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This offloads the getaddrinfo() socket operation to the
simplelink WiFi driver, via a socket_offload hook.
This was validated using http_get on cc3220sf_launchxl.
Also implements freeaddrinfo().
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, the NWP (Network Coprocessor) was configured during
simplelink_init().
Since the SimpleLink "FastConnect" feature was added,
meaning an automatic reconnect can occur at this time, this
results in early callbacks into the network stack
before it was fully initialized, resulting in a NULL iface
ptr being sent in as argument.
Now, for safety, the NWP startup is moved later to iface_init,
where it more logically belongs.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If the SimpleLink WiFi driver is configured, and socket offload
enabled, this revectors the Zephyr BSD socket APIs to the SimpleLink
WiFi host driver BSD socket APIs, providing a
direct offload of the TCP/IP stack to the CC3220SF network
coprocessor.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Place simplelink driver files into a subdirectory on par with
winc1500 subdirectory, to effect a better file organization.
No functional change in this patch.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>