The gsm_ppp driver is deprecated, and will be removed, along with
its dependencies UART_MUX and GSM_MUX.
This commit removes the integration with GSM_MUX from ppp.c, making
it solely dependent on the chosen node zephyr,ppp-uart.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
net_pkt_alloc_buffer() deducts the free space from the requested number
of bytes.
As ppp_save_byte() calls net_pkt_alloc_buffer() when the packet has one
byte available still, this causes all but the first net_buf in the
packet to be of size CONFIG_NET_BUF_DATA_SIZE - 1.
Consequences:
- With CONFIG_NET_BUF_FIXED_DATA_SIZE enabled, one byte per net_buf
gets wasted.
- CONFIG_NET_BUF_DATA_SIZE has typically an even, likely even a power
of two value. Using exactly one byte less per buffer causes
operations that require aligned memory (e.g. DMA) to become
inefficient or to not work at all.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
User is able to enable packet capture for low level HDLC data
frames received from and sent to network. This data can sent to
remote system for analysis. The captured data is encapsulated
into Linux cooked mode SLL packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Its default value (100 ms) resulted in PDUs big enough to never make it
through on a slow enough UART (e.g. ~1152-byte PDUs on a UART@115200).
The UART TXs were silently aborted.
A no-timeout value is now allowed and made the default.
Additional warnings are logged when it is likely that a UART TX
was aborted due to a too low timeout for the used baud rate.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Disable UART when the PPP interface is brought down.
This prevents an error when it is next brought up.
- Change the level of certain logs to be less concerning
and less verbose.
- Fix warnings regarding the passed parameter types of %p conversions.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix few mismatched CONTAINER_OF, one missing k_work_delayable_from_work
conversion and few cases where the target should be pointing at the
first element explicitly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix few instances of delayable work handlers using the k_work pointer
directly in a CONTAINER_OF pointing to a k_work_delayable.
This is harmless since the k_work is the first element in
k_work_delayable, but using k_work_delayable_from_work is the right way
of handling it.
Change a couple of explicit CONTAINER_OF doing the same work as the
macro in the process.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This fixes 3 issues that came within PR #59124 for ppp uart usage.
Earlier start/stop of ppp was done at enable() but that
was removed in PR #59124. Now putting enable/disable() back and
putting start/stop there.
Additionally, there was a double ppp carrier ON when NET_EVENT_IF_DOWN.
For that net_if_carrier_on/off is set in uart ppp.c driver.
Also, maybe worth to be mentioned that after PR #59124 there is no
ppp carrier off when lcp is disconnected, for workaround that change,
application should use ppp dead/running events.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This reverts changes introduced in commit
dd535f611d, as they broke the gsm_ppp
driver integration with PPP L2. Apparently, a more thorough
refactoring is needed to use the new interface management scheme with
PPP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align PPP drivers/L2 with interface state handling update. Use the
carrier on/off notification instead of bringing the interface up/down to
update the interface state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move from using Kconfig NET_PPP_UART_NAME to a devicetree chosen
property ("zephyr,ppp-uart"). This is similar to a number of other
functions like "zephyr,shell-uart" or "zephyr,bt-uart".
As part of this we rework the init code a little to use
DEVICE_DT_GET for the modem gsm-ppp case.
Signed-off-by: Kumar Gala <galak@kernel.org>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updated uart_rx_enable() and uart_tx() to use timeout given
in microseconds. Previously argument was given in milliseconds.
API change was done in:
https://github.com/zephyrproject-rtos/zephyr/pull/39041
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
New Kconfig CONFIG_PPP_NET_IF_NO_AUTO_START
to have an option to disable of starting of the PPP networking interface
right after the init.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
CRC16 was removed by simply decreasing length of the last fragment by 2.
This worked as long as last fragment was longer than 1 byte. If not,
then last fragment was corrupted (its length ended up being 65535),
leading to undefined behavior.
Fix CRC16 removal by utilizing recently introduced
net_pkt_remove_tail(), that properly handles multiple fragments.
Reported-by: Jim Paris <jim@jim.sh>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introducing PPP dialup features to enable e.g. usage of nrf9160
based board as a dialup modem for transferring ip data over PPP
(e.g. windows dial up), i.e. usage of Zephyr PPP as a server for
providing MTU/MRU, IP address and DNS addresses for a PC:
- PPP LCP MRU option (configurable)
- PPP server: IPCP ip and dns address peer options to enable
providing IP and DNS addresses for PPP peer.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
ringbuf claim API returns pointer to contiguous area. In cases when data
in ringbuf wraps the end of internal buffer, then single call to claim
data is not enough to get all data - there is remaining part on the
beginning of internal buffer. Those remaining bytes will need to wait
for next ISR handler to trigger workqueue. Theoretically this means that
data on the beginning of ringbuf can wait there forever, or simply to
the next timeout in PPP stack when data traffic continues.
Consume data from ringbuf in a loop, stopping only when claiming results
in empty buffer. This will make sure that there is no stale data in the
ringbuf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Claimed ringbuf bytes were parsed until first frame was detected, but
remaining data in the claimed area was just ignored / lost.
Continue parsing bytes to the end of claimed area after each detected
frame.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
By default PPP interface is not taken up automatically but only
after the PPP connection to modem is ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Before establishing the ppp connection, windows sends the string CLIENT
and expects the reply CLIENTSERVER from the modem.
This functionality is implemented in the new function
ppp_handle_client().
This feature must be enabled via Kconfig.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
