Remove redundant `const` qualifiers in `struct modem_cellular_config` and
add `const` to the declaration to ensure the structure resides
in read-only memory (rodata).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Adds the necessary defines with init, dial and periodic chat scripts to
support the Sequans GM02S Modem.
Modification to cxreg handler to process GM02S +CEREG response.
Signed-off-by: Thibo Verheyde <thibo@dptechnics.com>
Add missing fields to complete info struct to
chat script for Telit ME910G1. Also for test
suite modem bg95.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This commit implements a network registration status API,
including return of reject cause in case of denial.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add connect match for dialing PPP connection.
Ensure PDP authentication is disabled.
Request manufacturer, firmware version, and IMSI from the modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow not specifying the chat_filter parameter in a device
definition, which is equivalent to setting it to "".
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The nRF91 series devices, when running the Serial LTE Modem (SLM)
application starting with nRF Connect SDK 2.6.0, can now be used as
standalone modems via the generic modem_cellular driver.
A configuration to run the cellular_modem sample on the nRF9160 DK
(plugged in to another nRF91 series device running SLM) is provided.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
If the IPv6 DNS address is not a valid address, DNS will fallback
to the IPv4 DNS address.
Fix copying the IPv4 address to the IPv6 address by using
the IPv6 address destination length.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
The res param in offload_freeaddrinfo is not used.
Mark it as unused, to avoid static analysis complaining about
Parse warning (PW.PARAM_SET_BUT_NOT_USED)
Fixes CID 316235
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
info level is printed always to console and it's noisy.
Change to debug level, which can be enabled with
CONFIG_MODEM_MODULES_LOG_LEVEL_DBG
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Remove receive and transmit timeouts which are no
longer useful as the RECEIVE_READY and
TRANSMIT_IDLE events will be used to efficiently
manage timeouts between transmit/receive calls.
Then update the the in-tree drivers using the
modem_chat module to omit the process timeout
parameter.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
rssi 31 will be -51dBm or greater, where -51 is valid. Fix the
range by allowing until -51.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
This commit implements parsing of the CESQ extended signal quality AT
command, extracting RSRP and RSRQ which is relevant for LTE connections.
It's used in the U-blox SARA-R5 modem instance. Furthermore, the IMEI,
IMSI is extracted in the same modem.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
The QCCID handler is Quectel specific and as such may not be part
of the modem cellular driver which only supports commands defined
in 3GPP TS 27.007
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The modem_cellular.c driver now uses a common script to get
signal strenght, which is run on demand. This is more efficient
than polling it, and simpler since every modem doesn't have to
define their own variant of the script.
Additionally, the CSQ handler now stores the "raw" rssi value
returned from AT+CSQ to be parsed by the cellular_modem_get_signal
implementation.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Move the implementations of the cellular API in modem_cellular.c
to an cellular_driver_structure, and implement this API structure
withing the device drivers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Fixed Kconfig to remove dependency between modem_socket and
modem_context, the two do not depend on each other and
should be possible to use independently
Signed-off-by: Alessio Lei <alelei94@yahoo.it>
Do not allow the modem to sleep if the driver is busy.
Fix CTS filtering. Ignore small pulses on the CTS line.
Fix socket restoration. Restored sockets could be mismatched
with a wrong type.
UDP sockets could be duplicated during restore.
Improve IO debug mode. Use warning message for IO debug mode
to easily see IO transitions color coded in a terminal.
Ensure the UART is enabled whenever the driver needs to send
commands to the modem.
Ensure DNS resolver is re-initialized after the modem is powered off.
PROD-307
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
U-blox SARA-R4 already exists but the behavior is different,
requiring a separate driver instance. For instance, R5 autostarts,
so this commit also adds support for skipping power on pulse.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Some modems or networks require PAP authentication for successful
LCP handshake. Tested on U-blox SARA-R5 with zephyr,gsm-ppp.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Fix handling of strncpy in cgnsinf parsing function to avoid
potentially getting a non-null terminated string.
Fixes#58573 / CID: 248403
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Build errors where introduced by
c76d5b882c and are fixed with this
commit. They are trivial fixes of malformed lines.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The init scripts need a missing wait for OK after sending
AT+CGMM and the AT+CMUX command specifies more parameters
than nessesary, and in some cases incorrectly.
This commit adds the missing wait for OK and fixes the AT+CMUX
commands in the init scripts.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Added chat script and initial config to support Telit ME910G1.
Needed to edit power_pulse pin timing in accordance to datasheet.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
