Commit graph

10 commits

Author SHA1 Message Date
TOKITA Hiroshi 7b61d1c43c drivers: led_strip: Enabling config with DT_HAS_..
Applying the modern way which is adding `default y` and
`depends on DT_HAS_...` to enable configs.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
2024-03-20 17:20:08 -05:00
TOKITA Hiroshi 7d99de6dfa drivers: led_strip: ws2812: Remove WS2812_STRIP and WS2812_STRIP_DRIVER
Removing `choice WS2812_STRIP_DRIVER` to enable the use of multiple
types of WS2812 drivers.
Also, `menuconfig WS2812_STRIP` will be deleted as it does not
correspond to the appropriate settings.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
2024-03-20 17:20:08 -05:00
Gerard Marull-Paretas 95fb0ded6b kconfig: remove Enable from boolean prompts
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:

sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 15:35:54 +01:00
Ulf Magnusson bd6e04411e kconfig: Clean up header comments and make them consistent
Use this short header style in all Kconfig files:

    # <description>

    # <copyright>
    # <license>

    ...

Also change all <description>s from

    # Kconfig[.extension] - Foo-related options

to just

    # Foo-related options

It's clear enough that it's about Kconfig.

The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)

    git ls-files '*Kconfig*' | \
        xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-04 17:31:27 -05:00
Ulf Magnusson 975de21858 kconfig: Global whitespace/consistency cleanup
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).

Go for the most common style:

 - Indent properties with a single tab, including for choices.

   Properties on choices work exactly the same syntactically as
   properties on symbols, so not sure how the no-indentation thing
   happened.

 - Indent help texts with a tab followed by two spaces

 - Put a space between 'config' and the symbol name, not a tab. This
   also helps when grepping for definitions.

 - Do '# A comment' instead of '#A comment'

I tweaked Kconfiglib a bit to find most of the stuff.

Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-01 15:53:23 +01:00
Ulf Magnusson 677f1e6db9 kconfig: Turn pointless/confusing 'menuconfig's into 'config's
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.

Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.

    [*] Enable foo ---

This is how it would be shown if there were children but they all
happened to be invisible as well.

With a regular 'config', it turns into

    [*] Enable foo

Change all pointless 'menuconfig's to 'config's.

See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-10-22 13:53:06 -05:00
Kumar Gala 003bdb5fb6 led_strip: lpd880x: Add Device Tree support
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines.  Support both LPD8803 & LPD8806 device tree compats.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-29 12:04:07 -06:00
Ulf Magnusson 3ec8dd5744 drivers: led_strip: Kconfig: Remove redundant 'default n' properties
Bool symbols implicitly default to 'n'.

A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.

This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-07-03 17:11:31 -04:00
Tomasz Bursztyka ea2431f32f api/spi: Reduce parameter number on transceive function
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.

Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.

Fixes #5839

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-04-04 19:02:35 +02:00
Marti Bolivar 658b673a83 drivers: led_strip: add LPD880x driver
LPD880x (e.g. LPD8803, LPD8806) devices are LED driver ICs which can
be controlled via a reduced SPI interface (clock and data only), and
support daisy chaining.

Add an led_strip driver for these devices.

Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
2017-10-28 13:23:30 -04:00