This reverts commit 780b12854c.
"drivers: ieee802154: nrf: cache radio channel"
Implementation affected RCP devices in openthread as MAC layer
does not call `Receive()` functions after transmit is done.
Additionally, after sending a frame to a new channel (for example
while discovery operation), radio switches to RX state immediately
after TX, but continues to listen on old channel for about 5ms,
until MAC layer calls `Receive` operation, forcing to change the
channel.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The current implementation implicitly assumes that if the device is
configured to have the capability of acting as a CSL endpoint then in
case a delayed reception with matching ID finishes with a timeout no
action is needed. This assumption is correct when RxOnWhenIdle mode is
disabled because the transition to sleep is done automatically by the
driver below. However, it's wrong when RxOnWhenIdle is enabled. This
commit fixes that case by adding a call to event handler that notifies
the higher layer about the event and allows it to transition to RxOff if
needed.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Cache configured radio channel and apply them only when a relevant
radio task is requested.
This allows to configure the channel in the transmit metadata, thus
avoiding unneeded `nrf_802154` API calls in some scenarios.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
For serialized nRF IEEE 802.15.4 Driver host, avoid using
`nrf_802154_csl_writer_anchor_time_set` too often by caching the CSL
RX time and period and using them to detect any shift on the periodic
pattern.
This improves power consumption by limiting the number of serialized calls.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The support for capability IEEE802154_OPENTHREAD_HW_MULTIPLE_CCA is added
to the ieee802154_nrf5 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Use generic symbols defined in ieee802154.h for packet/FCS size instead
of redefining them in the driver header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Kconfig IEEE802154_NRF5_MULTIPLE_CCA option is added.
The new functions `z_ieee802154_nrf5_extra_cca_attempts_set` and
`z_ieee802154_nrf5_extra_cca_attempts_get` are added.
The ieee802154_nrf5.c is updated allowing to pass extra cca attempts
to nRF 802.15.4 Radio Driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
clean up redundant static functions
convert `csl_rx_time` to uint32_t and remove redundant `nrf5_schedule_rx`
`nrf5_config_csl_period` and `nrf5_receive_at` static functions.
`csl_rx_time` has been passed as uint32. It is compared to uint64 value
returned by `nrf_802154_sl_timer_current_time_get` in
`nrf_802154_ie_writer.c` which leads to wrong calculation of phase in CSL.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The updated nrf_802154 API accepts 64-bit time in microseconds.
The shim layer is updated to use 64-bit time.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This is a follow-up to commit 9f56cc5531.
Add net/ in the inclusion of ieee802154_radio.h so that the file can
be successfully included.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces runtime query of the HW Capabilities of
the nRF IEEE 802.15.4 Radio Driver.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
The radio driver will now notify the upper layer about Frame Pending Bit
value in the ACK response it sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Obtain RX time from the radio driver. Fill the `net_pkt` with
a timestamp if `NET_PKT_TIMESTAMP` is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Notify about actual data transmission start.
Needed when ACK timeout is disabled in the radio driver.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Implement function and necessary callbacks to handle Energy Scan feature
of the nRF radio driver needed by some radio stacks.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
nRF5 driver did not utilize `ieee802154_radio_handle_ack` API, therefore
did not provide ACK frames to the upper layer. This commit fixes this
problem.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align ieee802154_nrf5 driver to a new radio driver API.
Utilize new radio driver features (CCA).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a driver for nRF5 802.15.4 radio. This driver
is a wrapper for the driver provided by ext/hal/nordic/drivers.
Change-Id: I20ee4aff3d1b994c621ba8eaab208d15d85e4c01
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
