The `ARCH` init level was added to solve a specific problem, call init
code (SYS_INIT/devices) before `z_cstart` in the `intel_adsp` platform.
The documentation claims it runs before `z_cstart`, but this is only
true if the SoC/arch takes care of calling:
```c
z_sys_init_run_level(_SYS_INIT_LEVEL_ARCH);
```
Which is only true for `intel_adsp` nowadays. So in practice, we now
have a platform specific init level. This patch proposes to do things in
a slightly different way. First, level name is renamed to `EARLY`, to
emphasize it runs in the early stage of the boot process. Then, it is
handled by the Kernel (inside `z_cstart()` before calling
`arch_kernel_init()`). This means that any platform can now use this
level. For `intel_adsp`, there should be no changes, other than
`gcov_static_init()` will be called before (I assume this will allow to
obtain coverage for code called in EARLY?).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This was all done as part of the soc and called from the soc. Define
this type of console under drivers/console and use it in the SoCs
supporting that via SYS_INIT instead of calling the console code
directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes an issue with outgoing mcumgr frames that are larger than the
transport MTU size whereby they would wrongly be split up into multiple
frames with multiple start frame headers, which affected SMP over
console transports.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
A few drivers could initialize chosen UART at compile time, allowing to
constify device pointer.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This changes the return value of uart_mux_send() to return
how many bytes sent instead of simply zero for any bytes sent.
This would make it consistent with other UART send commands where
they return number of bytes sent.
Fixes#48470
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a minimal EFI console driver to support printf, this console driver
only supports console output. Otherwise the printf will not work.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MISRA C:2012 Rule 8.2 (Function types shall be in prototype form with
named parameters.)
Added missing parameter names.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the semihost_console implementation to use the semihost API
instead of manually constructing the supervisor calls.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Control the usage of semihosting with a dedicated symbol, instead of
implying semihosting from the usage of `SEMIHOST_CONSOLE`. This allows
semihosting to be used without the semihost console.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Conceptually, ring_buf_item_put() and ring_buf_item_get() are specialized
versions of ring_buf_put() and ring_buf_get(). Make it so to rationalize
the code to open the way for more optimizations.
This means we need specialized wrappers on top of ring_buf_init()
accordingly, given that the core machinery is now common and byte based.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since there are no more users and dependencies of
Kconfig option USB_UART_CONSOLE in the tree,
remove the remains and the option USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not change init level and priority of console driver
if Kconfig option CONFIG_USB_UART_CONSOLE is enabled because
commit 37f4d9ba63
("usb: cdc_acm: rework cdc_acm_poll_out to non-blocking")
changed CDC ACM UART driver so that it more closely mimics
the real controller and CDC ACM UART driver now uses the same
init level and priority as regular serial driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all drivers settings having `[EXPERIMENTAL]` in their
prompt has has been updated to include `select EXPERIMENTAL` so that
developers can enable warnings when experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Refactors all of the console drivers to use a shared driver class
initialization priority configuration, CONFIG_CONSOLE_INIT_PRIORITY, to
allow configuring console drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEFAULT to preserve
the existing default initialization priority for most drivers.
The driver-specific option, CONFIG_NATIVE_POSIX_CONSOLE_INIT_PRIORITY,
is left intact because the native posix console driver needs to
initialize after the UART console driver when both drivers are enabled.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Some functions were being re-defined as macros if certain conditions
were not met.
Fix violations to rule 5.5
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
console_input_init is only used in the same scope it is implemented.
There is not need to have it defined elsewhere.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for Quectel modem in gsm_ppp modem driver.
The CMUX cmd is based on MUX application notes v1.0(2020-09-22)
for BG95, BG77 and BG600L. Tested and working on EC21e.
As the gsm_ppp doesn't do power control, it is required to power
on the modem manually in the application.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the init priority of native posix console to 99.
When building for native_posix, it is usually assumed that
the output would be stdout. With old priority at 60, UART
console, for example, can be initialized later which means
printk() would not go to stdout. So changing the native posix
console to be (hopefully) initialized last.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The logging macros use _Generic() atm and it started to complain
when we are trying to print pointer value of gsm_dlci and gsm_mux
structs. Cast the pointer value to (void *) to overcome this.
Fixes#35329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative
for gsm_mux and uart_mux drivers.
Fixes#34103
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
