In CMake 3.13 a warning is produced if one does not explicitly state
what the policy for CMP0079 should be. To resolve this warning we set
policy CMP0079 to OLD.
This is expected to have no semantical change. When we want a
semantical change we can flip the policy and port the build scripts to
the new behaviour.
This fixes#11794
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch creates a rule in the cmake to trigger the generation
of linker_relocate.ld and code_relocation.c files.
The linker_relocate.ld will create appropriate sections and will
link the required functions or variables from all the selected
files.
The code_relocation.c will have code that is needed for
initializing data sections and copy of text sections(if XIP).
Also this will contain code that is needed for zeroing of bss.
The procedure to invoke this feature is:
1. Enable CONFIG_CODE_RELOCATION in the prj.conf
2. Inside CMakeList.txt in the project we need to mention
all the files that needs to get relocated.
zephyr_kernel_code_relocate(src/*.c SRAM2)
Where the first argument is the file/files and the second
argument is the memory where it has be placed.
NOTE: The file argument supports glob expressions.
NOTE: Step 2 can be done as many times as required. And relative
paths can be given here.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move libapp.a into it's own directory. This would make it's placement
consistent with how zephyr.elf is placed.
E.g. it might now look like:
ls b/*
b/build.ninja b/CMakeCache.txt b/cmake_install.cmake b/rules.ninja
b/app:
libapp.a
b/CMakeFiles:
3.12.0 cmake.check_cache CMakeOutput.log TargetDirectories.txt
app.dir CMakeError.log CMakeTmp
b/zephyr:
arch kernel subsys
boards lib tests
cmake liboffsets.a zephyr.bin
CMakeFiles libzephyr.a zephyr.elf
cmake_install.cmake linker.cmd zephyr.hex
ext linker_pass_final.cmd zephyr.map
include linker_pass_final.cmd.dep zephyr_prebuilt.elf
isrList.bin misc zephyr.stat
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch adds a dependency from the 'flash' target to
the 'mergehex' target IF files to be merged are configured.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Some toolchains are built with multilib enabled in order to provide
multiple versions of the same library, optimized for different ABI
or architecture. They require the the ABI/architecture/CPU selection
options to be passed at linked time. This is important for example
when linking with newlib.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow user to add externally built hex files to the cmake property
HEX_FILES_TO_MERGE. The hex files in this list will be merged
with the hex file generated when building the zephyr application.
This allows users to leverage the application configuration
available in Kconfig and CMake to help decide what hex file
should be merged with the zephyr application.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add script and cmake functions for automatically generating Character
Frame Buffer (CFB) font header files from image files, TrueType, or
OpenType font files.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Align how DT and Kconfig print log output to be more consistent.
For instance, Kconfig does not state which header file it generates,
so we remove this from DT.
Also, Kconfig states which sources it uses, which is useful to know
when there is a build failure, so we align with Kconfig by printing
the DT source and overlay files.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The 'FindPythonInterp' that is distributed with CMake 3.8 is affected
by bug: https://github.com/zephyrproject-rtos/zephyr/issues/11103
To work around this, until we upgrade to 3.13, we copy and patch the
3.8 version of 'FindPythonInterp' into the Zephyr repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Copy the 3.8.2 version of FindPythonInterp.cmake into the repo so that
we can patch it and fix#11103.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When we move DT infront of Kconfig we are going to need access to a C
toolchain before Kconfig is evaluated. This means it will not be
possible to specify the toolchain used through Kconfig.
To deal with this we ...
Drop support for specifying CROSS_COMPILE through Kconfig. Still
available is the ability to specify CROSS_COMPILE through the
environment or through a CMake variable.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
CMake prints a helpful error message with all the boards supported
when a board name has been misspelled. But CMake also
remembers (caches) the corrupted board name and refuses to change it
until the board directory has been cleared.
CMake is rightly hesitant to change the board, as other cached
variables depend on what the board is. But it is safe to change the
board just after it has been selected, because we verify it's
correctness before using it to calculate other variables.
So to support the use-case of changing a misspelled board
name (without clearing the build directory) we unset the cached board
when it is invalid.
Also; change the now unused (in-tree) macro 'assert_with_usage' to
'print_usage'.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In addition to zephyr/include and zephyr/dts also scan
the dts directory within the application source directory
for files included by the DTS.
Allows to have application specific DTS includes. This
is especially useful for out of tree drivers.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
In order to be able to invoke Python from Kconfig files,
set the path to the Python executable (which can be python,
python3, py -3, etc) as an environment variable so that
Kconfig shell invocations can use it like:
config MY_OPTION
string "My option string"
default "$(shell,$(PYTHON_EXECUTABLE) \
$(ZEPHYR_BASE)\scripts\script.py)"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Almost all labels generated by the extracting script are now prefixed
with DT_. The only exceptions are:
- stuff with 'base_label' specified in yaml bindings
- items specified by 'regs_config' and 'name_config' dictionaries
in globals.py module
- FLASH related labels generated by flash.extract() called separately
from generate_node_definitions(), e.g. FLASH_WRITE_BLOCK_SIZE -
these are used directly, not through fixups, from existing code
so I didn't want to touch them now
Labels generated for aliases are additionally prefixed with information
from the 'compatible' property, e.g. DT_GPIO_LEDS_LED0_* is generated
instead of LED0_*. To provide backward compatibility for code that uses
LEDx_* and SWx_* labels in their previous forms, a command line option
named 'old-alias-names' is added to the extraction script. This option
causes that the labels for aliases are generated in both old and new
forms. Currently this option is always enabled in dts.cmake.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
MSYS support was added as a stop-gap while native windows support was
unsupported. Now that Native windows support is stable we can drop
support for MSYS.
Dropping support for MSYS fixes#11260 and allows us to spend more
resources on native windows support.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When Python3 is not found the build system will warn the user and then
continue. Python3 is required and continuing can only confuse the user
with new off-topic error messages.
This patch denotes Python3 as required to resolve this.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add support for out-of-tree shields. Out-of-tree shields can now be
stored in out-of-tree board directories.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
XCC does not support the "-undef" flag so set NOSYSDEF_CFLAGS to
empty string to fix compile warning.
Also, XCC does not supply the macro __SIZEOF_LONG__ which breaks
the build. So define it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Not all compiles/linkers support the GCC flags to not include standard
defines, include files and libraries. So make these parameters such
that the toolchain can define them when supported.
Also, according to documentation, -nostdlib does the same for both
-nostartfiles and -nodefaultlibs. So remove the redundant ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The CMake extension 'generate_inc_file_for_target()' has some code for
generating a unique target name that is needed elsewhere, for instance
by DeviceTree.
Make the code re-usable by refactoring it out into it's own function.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The Zephyr SDK distributes a device-tree-compiler with version
"1.4.6-dirty". As of recently, we have started using flags that are
only present in recent versions of dtc. Like the flag "-E
unit_address_vs_reg".
Users that are opting out of using the Zephyr SDK's host tools are
reporting obscure error messages.
To avoid this we use an appropriate error message when the detected
version is unsupported.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
CI sometimes fails with a temporarily corrupted toolchain capabilitiy
database file. Although not proven, there is evidence that CMake's
file(APPEND does not work atomically when there are concurrent writes
and reads of a certain size.
To avoid file appending, we re-write the key-value database
implementation to store keys in filenames and values in individual
single-byte files.
This is (most likely) fixes#9992.
NB: Users that have been overriding the database file location with
the CMake variable ZEPHYR_TOOLCHAIN_CAPABILITY_CACHE must now specify
a directory with the variable ZEPHYR_TOOLCHAIN_CAPABILITY_CACHE_DIR.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
1. The generator handles just the COMPILE_DEFINITIONS.
(See: __ZEPHYR_SUPERVISOR__)
For the defines in INTERFACE_COMPILE_DEFINITIONS
a special handling is necessary.
Solution:
The amendment function generates a macro header file
${CMAKE_BINARY_DIR}/zephyr/include/generated/cmake_intdef.h
based on INTERFACE_COMPILE_DEFINITIONS and appends the
defines from the file to
CMAKE_EXTRA_GENERATOR_C_SYSTEM_DEFINED_MACROS.
2. Eclipse CDT4 indexer has problems with CMake 'Eclipse CDT4 - x'
generator projects that use mixed C/C++.
The Eclipse CDT4 indexer is showing a lot of unresolved symbol
errors, when the project was created with CMake generator and
the code is a mix of C and C++.
The root cause of the problem is the g++ built-in __cplusplus macro,
that is passed by CMake generator in the '.cproject' file.
The defines in '.cproject' are always the same for C and C++.
In mixed C/C++ projects, the header files often contain the following
lines to let C++ code call the C functions:
#ifdef __cplusplus
extern "C" {
#endif
< header content >
#ifdef __cplusplus
}
#endif
Whenever the Eclipse CDT4 indexer compiles the code for
code analysis, it has the macro __cplusplus set,
independent of whether standard C or C++ source files are compiled.
The 'extern "C"' confuses the standard C compilation and the indexer
is messed up.
Solution:
The amendment function deletes the __cplusplus entry from
CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_DEFINED_MACROS.
3. The amendment function appends the defines from
${CMAKE_BINARY_DIR}/zephyr/include/generated/autoconf.h to
CMAKE_EXTRA_GENERATOR_C_SYSTEM_DEFINED_MACROS.
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
The 'run' target was missing it's dependency on the executable and
thereby behaving incorrectly.
This fixes#10639 .
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new optional TOOLCHAIN_ROOT cmake and environment variable to
specify an alternative location for toolchain cmake files.
When set, Zephyr will look for a toolchain cmake file located in:
${TOOLCHAIN_ROOT}/cmake/toolchain/${ZEPHYR_TOOLCHAIN_VARIANT}.cmake
Signed-off-by: François Delawarde <fnde@oticon.com>
The filename dts.fixup is deprecated, dts_fixup.h should be used
instead. This commit detects when fixup files have not been renamed
and errors out with a warning.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Drop a few paths from when we preprocess the dts. This is to reduce
creep of where #defines might get resolved from.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow application build scripts to pass extra flags to DTC, this could
for instance be done to enable/disable warnings.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
As far as testing can tell, all occurences of the "Node has a unit
name, but no reg property" warnings have been fixed. To prevent them
from re-appearing we turn the warning into an error.
This is a breaking change for out-of-tree boards that are affected by
the warning.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The deprecation warning has existed for 1 release and 3 months, giving
users plenty of time to be warned.
This reverts commit 9c93e8e87b.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change the format of KERNELVERSION as it exists in Kconfig to match
it's format elsewhere. Specifically, change from a string format
"1.10.3" to a numerical format.
This format change is a backwards-incompatible change. Any out-of-tree
Kconfig sources that were accessing KERNELVERSION with
$(KERNELVERSION) will need to be ported.
This change is to fix a bug. KERNELVERSION should have always been in
a numerical format. It should have been in a numerical format because;
KERNELVERSION is in a numerical format as a CMake variable and as a C
macro.
The purpose of having KERNELVERSION available in Kconfig is to have
configuration depend on the version, but this is only possible if it
exists in a numerical format[0].
[0] A string comparison of two semver strings does not always result
in a correct version comparison.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
KCONFIG_AUTOHEADER is an environment variable that was used by the C
Kconfig tools to determine where the autconf.h file is. After the
migration to python this environment variable became unused.
This patch removes the deprecated env var.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The commit 1b80f00f56 made git describe
failure as fatal. But a failure can happens when no tag is in a
repository. And such a repository might exist for a internal build
system or some test environments.
Zephyr's build system is capable building without a commit hash.
This commit makes it non-fatal again and inform users that the build
system is failed to execute "git describe" but continues building with
KERNEL_VERSION_STRING.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Adds a build system target for the west attach command, which starts a
debugging session without programming the flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update to the latest west. This includes a new 'attach' command. There
are also multi-repo commands, but those won't get exposed to the user
unless they install Zephyr using "west init" + "west fetch" (and not,
say, "git clone").
Replace the launchers; they now detect whether zephyr is part of a
multi-repo installation, and run the west code in its own repository
if that is the case.
This also requires an update to:
- the flash/debug CMakeLists.txt, as the new west package is no longer
executable as a module and must have its main script run by the
interpreter instead.
- the documentation, to reflect a rename and with a hack to fix
the automodule directive in flash-debug.rst for now
Signed-off-by: Marti Bolivar <marti@foundries.io>
If this environment variable is missing, the user gets a rather
confusing cmake error message about "STREQUAL" "gccarmemb" from the
lines below.
Adding quotes to the check makes cmake handle it better and instead
report the problem in the later ASSERT.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
In dts.cmake, build shield list. For each shield, check if
associate KCONFIG is enabled and if it is, add matching files
to following new cmake variables:
-DTC_SHIELD_OVERLAY_FILE
-DTC_SHIELD_FIXUP
Then, consume these variables when needed.
Shield overlay is conceived as the very first overlay applied
to the board dts. It intends to build a new board that should
then behave as any other board versus common or user's overlay.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Automatically detect the Kconfig file in it's conventional placement
${APPLICATION_SOURCE_DIR}/Kconfig and set KCONFIG_ROOT accordingly.
'Convention over configuration' is an imporant principle for
minimizing metadata and keeping things consistent. We use this
principle for instance with the file prj.conf.
This commit applies this principle to also re-direrct KCONFIG_ROOT.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
