The commit adds CONFIG_MCUBOOT_CMAKE_WEST_SIGN_PARAMS Kconfig
option to allow passing arguments to west sign.
The option is used to pass arguments that immediately follow
west sign in cmake invocations and replaces hardcoded
"--quiet" parameter, but defaults to the "--quiet" value to
keep current behaviour.
New Kconfig option allows to pass arguments to west sign
without modifying cmake/mcuboot.cmake.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
When we build for a SoC that has a cortex-m4 w/o a FPU that
utilizes CMSIS headers with armclang (like mec1501modular_assy6885)
we get the following warning:
modules/hal/cmsis/CMSIS/Core/Include/core_cm4.h:93:8: warning:
"Compiler generates FPU instructions for a device without
an FPU (check __FPU_PRESENT)" [-W#warnings]
#warning "Compiler generates FPU instructions for a device
without an FPU (check __FPU_PRESENT)"
Fix the by setting -mfloat-abi=soft for such cases that don't have FPU
enabled.
Fixes#56068
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Moves the deprecation notice for prj_<board>.conf files to the
proper location where other deprecation notices are located.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
_static_thread_data should be in ROM as its static data. So move
it from common-ram.cmake to common-rom.cmake and fix it the params
we call zephyr_iterable_section with.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This now throws an error if there is no prj.conf file located in a
user-specified APPLICATION_CONFIG_DIR, which otherwise would have
used an empty configuration and not included board-specific files.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When building with C++ the icx compiler will try to utilize optimized
versions of memset/memcpy that are provided as part of libirc. However
libirc also has dependencies on things likes getenv/setenv, etc that
are expect in a linux host environment. So disable use of libirc
via compiler flag -no-intel-lib=libirc.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This commit provides a number of helper macros for verifying arguments
passing to function:
- zephyr_check_flags_required
- zephyr_check_arguments_required
- zephyr_check_arguments_required_all
- zephyr_check_flags_exclusive
- zephyr_check_arguments_exclusive
which facilitates checking whether a required argument or flag has been
given or if mutual exclusive arguments are given.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Rename internals variables to lower case to distinguish those
variables from variables intended to be globally available.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Different users of the Zephyr CMake package may have different minimum
required versions of west. One important in-tree example is the
documentation, which must either be built with the latest version of
west, or with no west installed at all.
Make the MIN_WEST_VERSION variable configurable to support use cases
like this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
CMake versions <3.20.5 contains the following bug:
https://gitlab.kitware.com/cmake/cmake/-/issues/22310
This bug was fixed in CMake 3.20.5:
https://gitlab.kitware.com/cmake/cmake/-/merge_requests/6232
Generally Zephyr can build with CMake >=3.20.0, however the
`cmake/package_helper.cmake` is impacted by the above issue.
Therefore, specifically request CMake >=3.20.5 for package helper
and update documentation to recommend CMake version 3.20.5 in order
to minimize risk of users being impacted by this bug.
Users invoking package helper with CMake 3.20.0-3.20.4 will see:
> CMake Error at cmake/package_helper.cmake:45 (cmake_minimum_required):
> CMake 3.20.5 or higher is required. You are running version 3.20.x
Rest of Zephyr still builds with CMake versions >=3.20.0.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #55490
Follow-up: #53124
Prefix local version of the return variable before calling
`zephyr_check_compiler_flag_hardcoded()`.
This ensures that there will never be any naming collision between named
return argument and the variable name used in later functions when
PARENT_SCOPE is used.
The issue #55490 provided description of situation where the double
de-referencing was not working correctly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CROSS_COMPILE_TARGET is defined based on CONFIG_SOC selected. So far
'esp32s3' SoC was not taken into account, so building Zephyr with
'espressif' toolchain (the only one supported for now) is was not possible
out of the box.
Add 'CROSS_COMPILE_TARGET_xtensa_esp32s3' CMake variable, same as it is
done for other SoC specific variables. That way toolchain paths are
automatically figured out and building succeeds.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This improves the version checking for the zephyr SDK by searching
for newer versions that the version that was detected. This works
around the issue whereby the versions are contained in files with
MD5 hashes which might be in any order.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Follow-up: #53124
The PR#53124 fixed an issue where the variable `check` was not properly
dereferenced into the correct variable name for return value storage.
This was corrected in 04a27651ea.
However, some code was passing a return argument as:
`zephyr_check_compiler_flag(... ${check})`
but checking the result like:
`if(${check})`
thus relying on a faulty behavior of code updating `check` and not the
`${check}` variable.
Fix this by updating to use `${${check}}` as that will point to the
correct return value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
New C++ versions have deprecated "register" variables and restricted
"volatile" semantics, so new gcc's will emit warnings when they see
that syntax. Zephyr uses both in our C headers (though we should
probably get rid of register and unify with C++'s volatile model), so
we're disabling the resulting warnings.
But OLD gcc variants (like xcc, sigh) don't understand new -Wvolatile
and -Wregister on the command line, so they get confused. Limit the
uses to the standard versions for which gcc would emit warnigns; xcc
doesn't support those anyway.
Signed-off-by: Andy Ross <andyross@google.com>
Fixes: #53124
Fix de-referencing of check and exists function arguments by correctly
de-referencing the argument references using `${<var>}`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The toolchain support was developed and tested against arm clang
version 6.17. So add a check to ensure we are utilizing 6.17 or
newer.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Improve comments, rearrange variable definitions to better match the
control flow of the module, and avoid nesting by adding a return()
statement.
No functional changes expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The oneApi support has bit rotten since it was first introduced. Update
the support to function with the latest 2023.0.0 release and add a
check to only support that version or newer for now. Versions before
2021.2.0 have linker script failures.
Various fixes made:
* In the 2023.0.0 release, various binaries are in a llvm-bin path so
add support to search in that path. This replaces the python search
path that much older versions needed.
* newlib isn't supported with oneApi so set TOOLCHAIN_HAS_NEWLIB to
OFF to match that.
* 2023.0.0 doesn't back llvm-nm, so use binutils version. This
is expected to be fixed in 2023.1.0 release so add a check to
handle either case.
* Update compiler flag check based on clang to also support
CMAKE_C_COMPILER_ID of "IntelLLVM" as that is how the oneApi toolchain
reports itself.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Xtensa toolchain has its own linker, xt-ld, which is based on
binutils' ld. There are, of course, Xtensa specific options.
But mostly it is based on old version of ld. It would be
better to detach it from the ld profile to avoid any
incompatible changes there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a new UF2 runner, supporting only the flash capability.
Searches for FAT partitions containing `INFO_UF2.TXT` files,
and can optionally filter on a matching `Board-ID` value in
that file.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
Unlike gcc, clang splits out the flag controlling warnings about the return
type of `main' from other warnings related to that function. Add the extra
-Wno-main-return-type flag to mask these warnings when building Zephyr
without -ffreestanding, as when using picolibc.
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes the enforced `-s` option and only passes in a `-gdb` only if
CONFIG_QEMU_GDBSERVER_LISTEN_DEV is set. When unset, it allows users to
utilize QEMU_EXTRA_FLAGS from environment preventing a clash that occurs
if `-s` and `-gdb` are both passed to QEMU invocation.
Signed-off-by: Alp Sayin <alpsayin@gmail.com>
Move extra warning option from generic twister script into
compiler-dependent config files.
ARCMWDT compiler doesn't support extra warning options ex.
"-Wl,--fatal-warnings". To avoid build fails flag
"disable_warnings_as_errors" should be passed to twister.
This allows all warning messages and make atomatic test useles.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
nostdinc_include flag needs to contain path to llvm libraries
and remove other relative paths. Change compiler flag to add
default C includes on building C++ code using xcc-clang compiler.
Fixes#54730
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This avoids a cryptic DTC failure when compiling trying to compile
native_posix with a missing gcc or clang.
REQUIRED is available since CMake 3.18
Example with clang, cryptic error without this commit:
```
ZEPHYR_TOOLCHAIN_VARIANT=llvm west build \
-p -b native_posix samples/hello_world/
-- Found toolchain: host (clang/ld) <= this is wrong
-- Found Dtc: /usr/bin/dtc (found suitable version "1.6.1", minimum ...
-- Found BOARD.dts: zephyr/boards/posix/native_posix/native_posix.dts
CMake Error at /zephyr/cmake/modules/dts.cmake:191 (message):
command failed with return code: No such file or directory
Call Stack (most recent call first):
zephyr/cmake/modules/zephyr_default.cmake:113 (include)
zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boil...
CMakeLists.txt:5 (find_package)
```
Well hidden behind the scenes, dts.cmake fails above because it invokes
`CMAKE_C_COMPILER-NOTFOUND`
With this commit:
```
ZEPHYR_TOOLCHAIN_VARIANT=llvm west build \
-p -b native_posix samples/hello_world/
-- Found toolchain: host (clang/ld) <= this is still wrong
CMake Error at zephyr/cmake/compiler/clang/generic.cmake:7 (find_program):
Could not find CMAKE_C_COMPILER using the following names: clang
```
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Clang does not have printf return value optimizations like GCC, so there's
no flag to turn them off when building against a non-standard printf
implementation (e.g., picolibc without float support).
Signed-off-by: Keith Packard <keithp@keithp.com>
Deprecate old sparse support as Zephyr now provides a proper
infrastructure for SCA tools. Set ZEPHYR_SCA_VARIANT to sparse if user
is using deprecated way.
This allows to cleanup sparse code in various places and thus have a
cleaner build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Sparse support was original introduced in #43776.
This commit introduces sparse support as part of Zephyr SCA tool
infrastructure.
The implementation in this commit has some benefits over existing
support:
- It does not required users to set `REAL_CC` in environment before
invoking build command.
This reduces risk of user mistakes, such as
- REAL_CC being different from CMAKE_C_COMPILER.
- User running CMake in one terminal / environment where REAL_CC is
defined but invoking the build command in a different terminal /
environment where REAL_CC is not defined or defined differently.
- It improve user experience as the user no longer has to define /
re-define REAL_CC when building for different architecture, like
switching from arm to xtensa, as this is now handled in CMake.
- CMAKE_C_COMPILER is not overwriting, this can be important for other
tools which calls the C compiler for pre-processing purposes, such
as devicetree and linker script generation.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Static code analyser (SCA) tools are important in software development.
CMake offers built-in support for some tools, such as cppcheck and
clang-tidy.
Other tools, such as sparse, are not directly supported.
This commit provides a uniform way for users to specify a supported
SCA using `ZEPHYR_SCA_VARIANT=<tool>` which is consistent with how
toolchains are specified.
ZEPHYR_SCA_VARIANT can be set using `-D` or in environment.
Support for an SCA tool is done in `cmake/sca/<tool>/sca.cmake`.
SCA_ROOT can be used to specify additional search paths when looking up
implementation for a tool. SCA_ROOT can also be specified in
`zephyr/module.yml` as setting. This makes it possible to provide SCA
tool implementation as part of a Zephyr module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a compiler option to not merge globals. gen_kobject_list.py
is not capable of distinguish addresses of merged objects. The script
itself does not look wrong. The dward specification says that the
attribute DW_AT_location with opcode DW_OP_addr encodes a machine
address and whose size is the size of an address on the target machine
but for merged objects the address is longer, not clear why.
Disable global merge when userspace is enabled to avoid this problem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for Renode script overlays allowing
to tune simulation parameters for selected samples/tests.
Signed-off-by: Jan Malek <jmalek@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
When using picolibc from the toolchain, we need to use the standard include
paths to make sure the library headers are found, especially for libstdc++.
Add toolchain picolibc to the list of cases for which this is the case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Update API for zephyr_code_relocate to support cmake generator expressions,
as well as relocating libraries.
zephyr_code_relocate can now accept a target name to the LIBRARY argument,
which will be converted into a set of source files from that
target to relocate.
Alternatively, files can be passed as a space separated list
or CMake generator expression. This allows users more
flexibility when relocating files. Glob matching functionality is still
available, although the preferred method to do this would now be:
file(GLOB relocate_sources "src/*.c")
zephyr_code_relocate(FILES ${relocate_sources} LOCATION <location>)
Note! This commit breaks support for zephyr_code_relocate until in tree
usages of the API are updated to the new format.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In some architectures the linker performs global optimization relaxing
address modes and changing intructions in the output object file. This
is a problem when userspace is enabled since it assumes that addresses
won't change after certain build stage. In no supported architectures
this option is ignored.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit updates all in-tree code to use `CONFIG_CPP_EXCEPTIONS`
instead of `CONFIG_EXCEPTIONS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Fixes: #53696
Create a BOARD_REVISION_CONFIG setting to be consistent with the
BOARD_DEFCONFIG setting.
This allows systems which re-uses the Kconfig module to overrule the
file to be used as BOARD_REVISION_CONFIG in same way as is done for
the BOARD_DEFCONFIG file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The boards, shields, and zephyr_module CMake modules have some issues
in their comments that can be trivially fixed up.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Different CMake versions can have very subtle differences, for
instance CMake 3.21 links object files in a different order compared
to CMake 3.20; this produces different binaries.
CMAKE_VERSION is required information to track binary differences
between two build systems.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
- Fix commit b2520b09a7 ("devicetree:
drop support for dts_fixup.h files"), which removed support for
shield-related fixups but forgot to update the module-level
documentation comment.
- Fix commit 61453e4a58 ("cmake: Zephyr
CMake package and CMake modules"), which contained some
BOARD-related copy/paste errors and omitted documentation for
the SHIELD_DIRS output variable (this is used in the dts
cmake module, so it's part of the shield module's contract)
- Add some other clarifying remarks and comments
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The table of contents at the top of the file has 'Devicetree
extensions' as the name of the section containing... those things.
The actual place in the file where they are defined has a different
title, though, defeating searching in the file for that section name.
Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
"Populate" is ambiguous here: does that mean set, or append? The
answer is "append", so use that to be clearer. Be extra clear where
we're looking in as well.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
