As per #26393, Local APIC is using Kconfig based option for
the base address. This patch adds DTS binding support in the driver,
just like its conunter part I/O APIC.
Signed-off-by: Umar Nisar <umar.nisar@intel.com>
This header is private and included only in architecture code, no need for
it to be in the top of the public include directory.
Note: This might move to a more private location later. For now just
cleaning up the obvious issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Is rsdp_phys is assigned in the loop below code jumps to found label,
otherwise we return and value rsdp_phys is never used after 0
assignment.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adapt to the reworked zephyr cache API.
Fix build errors when building tests/kernel/cache with CACHE_MANAGEMENT and
CPU_HAS_DCACHE enabled for x86 SoCs
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
With all the stacks and TSS (etc), the x86_64 arch code can only
support maximum of 4 CPUs at the moment. So add a build assert
if more CPUs are specified via CONFIG_MP_MAX_NUM_CPUS, also
overwrite the range value for CONFIG_MP_MAX_NUM_CPUS.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enhance for cases when call z_float_enable() with NULL thread.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Unlike tracing module mainly for debug usage, this is
to allow runtime profiling IRQ performance data, and
target to enable it in product release since platform
can choose to make it work with low weight protocol.
Enable this option and implement runtime_irq_stats()
in platform code, such as Intel ISH platform implement
with SHMI protocol to allow host profiling irq stats.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Intel ISH SoC can't reboot via RST_CNT register,
so make sys_arch_reboot as weak function to allow
implement different arch reboot in SoC layer.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
With paging config, need to use physical address as
paging is not enabled here.
From IA manual, LDMXCSR instruction description is,
Loads the source operand into the MXCSR control/status
register, the source operand is a 32-bit memory location.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Some functions such as the ISH power management function needs to
reserve GDT entry place holders which are filled during runtime.
Add config option to define the number of GDT entry place holders
reserved and change the ia32 linker script accordingly.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes unneeded chain of includes. Since zefi is built separately
(using python script), any dependency creates include chain with
possibly missing configuration options.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Disables allowing the python argparse library from automatically
shortening command line arguments, this prevents issues whereby
a new command is added and code that wrongly uses the shortened
command of an existing argument which is the same as the new
command being added will silently change script behaviour.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
arch_dcache_range() function does not exist anymore, nor K_CACHE_WB
macro. Removing it entirely.
arch_dcache_flush_range() signature changed, so relevantly applying
these.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
esf_get_sp is used only when CONFIG_THREAD_STACK_INFO is enabled.
Just move this function around to be inside an ifdef guard.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The cache operations must be quick, optimized and possibly inlined. The
current API is clunky, functions are not inlined and passing parameters
around that are basically always known at compile time.
In this patch we rework the cache functions to allow us to get rid of
useless parameters and make inlining easier.
In particular this changeset is doing three things:
1. `CONFIG_HAS_ARCH_CACHE` is now `CONFIG_ARCH_CACHE` and
`CONFIG_HAS_EXTERNAL_CACHE` is now `CONFIG_EXTERNAL_CACHE`
2. The cache API has been reworked.
3. Comments are added.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The buffer contents returned from arch_gdb_reg_readone is a counted array
of bytes, not a C string. Use memcpy instead of strcpy for the failure
return path to avoid compiler warning about missing NUL termination.
Signed-off-by: Keith Packard <keithp@keithp.com>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move the FS_BASE MSR code to to the top of __resume to ensure
that %fs relative addressing run in the thread switching hook
works.
Signed-off-by: Keith Packard <keithp@keithp.com>
There seems to be an unresolved dependency chain in some x86 arch
headers, this file needs kernel.h to be included before arch_data/func.
This patch is a workaround, but problem should be fixed properly at some
point.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Convert the device to be Devicetree based. Adjusted tests and other
areas that were using old Kconfig properties.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The "framebuf" driver was an incomplete driver expecting _clients_ to
implement missing functionality (i.e. init and device definition)
outside of the driver. This pattern of scattering driver code throughout
the tree is not common (if used at all). If certain drivers share
functionality, one can create a common module within the subsystem (see
e.g. ILI9XXX drivers).
The _generic_ framebuffer code was only used to implement the Intel
Multiboot framebuffer driver. This patch centralizes all the scattered
code in the subsystem and adjusts the driver name to "intel_multibootfb"
to make things clear. If there's ever another framebuffer driver that
shares code, it can be split into multiple modules.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MISRA C:2012 Rule 14.4 (The controlling expression of an if statement
and the controlling expression of an iteration-statement shall have
essentially Boolean type.)
Use `do { ... } while (false)' instead of `do { ... } while (0)'.
Use comparisons with zero instead of implicitly testing integers.
Use comparisons with NULL instead of implicitly testing pointers.
Use comparisons with NUL instead of implicitly testing plain chars.
This commit is a subset of the original auditable-branch commit:
5d02614e34a86b549c7707d3d9f0984bc3a5f22a
Signed-off-by: Simon Hein <SHein@baumer.com>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The EFI console output call return with interrput enabled, it is a
firmware bug. And there was a solution that disabled interrupt it
return right away. But in some case the interrupt could happen
during the efi call context. If an interrupt was handled, a printk
call again will make it re-entried, or a swap might be happens.
This is suggested solution appiled for EFI console output:
1. Skip printk call when it is called in interrupt context.
2. Disable the schedule during the EFI call window.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Add a minimal EFI console driver to support printf, this console driver
only supports console output. Otherwise the printf will not work.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
MISRA C:2012 Rule 21.13 (Any value passed to a function in <ctype.h>
shall be representable as an unsigned char or be the value EOF).
Functions in <ctype.h> have undefined behavior if they are called with
any other value. Callers affected by this change are not prepared to
handle EOF anyway. The addition of these casts avoids the issue
and does not result in any performance penalty.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Signed-off-by: Simon Hein <SHein@baumer.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MISRA C:2012 Rule 8.2 (Function types shall be in prototype form with
named parameters.)
Added missing parameter names.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
The NS16550 UART base address was hardcoded in <soc.h> headers. This
bypasses the console choice defined in Devicetree. Hardcoded hardware
choices must be avoided now that DT is in place.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When legacy mode is enabled, Zephyr includes both include/ and
include/zephyr. Allow the zefi.py script to accept multiple include
paths to cover this scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Where we have access to a bootstrap UEFI environment, it's productive
to use that console as the default printk handler. That avoids the
bringup hassle of trying to configure UART settings blindly, as has
been customary. It also emits nice text to the framebuffer on devices
with no serial port or other debug harness at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When "eager FPU sharing" mode is enabled, FPU registers must be
initialised at the time of thread creation because the floating-point
context is always active and no further FPU initialisation is performed
later.
Note that, in case of the "lazy FPU sharing" mode, floating-point
context is inactive by default and the FPU is initialised when the
first floating-point instruction is executed.
Refer to the issue #44902 for more details.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Under QEMU and SeaBIOS, everything gets to be printed
immediately after "Booting from ROM.." as there is no newline.
This prevents parsing QEMU console output for the very first
line where it needs to match from the beginning of the line.
So add a dummy newline here so the next output is at
the beginning of a line.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In case of EFI, efi_init must be called before initializing early
serial: if that one as X86_SOC_EARLY_SERIAL_PCIDEV defined, its pcie
access will try to initialise pcie mmio access which one will try to
find an ACPI table. At this point, calling ACPI API prior to initialize
EFI will make RSDP looked up already... and since it cannot find it
without EFI being initialized first, ACPI is then broken.
Just moving early serial to initialize after multiboot/efi being setup.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If such table pointer is present with EFI system table, this will speed
up ACPI initialization later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Multiboot, let prep_c be aware of EFI boot.
In the futur, EFI will pass an argument to it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to mitigate at runtime whether it booted on multiboot or EFI,
let's introduce a dedicated x86 cpu argument structure which holds the
type and the actual pointer delivered by the method (multiboot_info, or
efi_system_table)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a dummy function will do.
When enabled, the code does not need the #ifdef as cmake is handling
this properly already. This was also the wrong CONFIG_ used there
anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Improve code by using DEVICE_DT_GET_ONE instead of device_get_binding,
since the intel_vt_d device instance can be obtained at compile time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When Zephyr runs directly on actual hardware, it will be always
directing MSI messages to BSP (BootStrap Processor). This was fine until
Zephyr could be ran on virtualizor that may NOT run it on BSP.
So directing MSI messages on current processor. If Zephyr runs on actual
hardware, it will be BSP since such setup is always made at boot time by
the BSP. On other use case it will be whatever is relevant at that time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on whether X2APIC is enabled or not, it will be safer to grab
such ID from the right place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will centralize CPUID related accessors. There was no need for it
so far, but this is going to change.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When XIP is not enabled, z_data_copy() already falls back to an empty
function. No need to ifdef it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In fact, in case of VT-D being enabled, it will require to get an
address and data for its own MSI based interrupts which cannot be
remapped (i.e.: will directly go to the relevant APIC).
This is necessary to get the Fault event supported in VT-D.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will not only be used by MSI remapping but by all relevant
interrupts.
Fix also IRTE settings:
- handle x2apic for destination id
- destination mode is always logical (as for IOAPIC)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SHV bit depends on the number of vectors allocated.
If it's facing a multi-vector MSI array, it will set the bit.
If not the bit must be 0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Refactor to handle this case. This is valid only when MSI multi-vector
feature is enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As all interruption need to go through VT-D, calling vt-d remap will
happen on lower level as seen next, so make sure all pcie related
irq/vector get tighten to their respective allocated IRTE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate an IRTE for all irq being connected through
arch_irq_connect_dynamic(). This will be mandatory since VT-D expects to
filter all interruptions (but the one it generates, as we will see
later).
Taking into account CONFIG_INTEL_VTD_ICTL_XAPIC_PASSTHROUGH, which could
help for debugging.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to differentiate with multi-vector or not, MSI vs
MSI-x: all need to be remapped if Intel VT-D is on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The warning below appears once -Waddress-of-packed-mem is enabled:
/home/carles/src/zephyr/zephyr/arch/x86/core/acpi.c: In function
'z_acpi_find_table':
/home/carles/src/zephyr/zephyr/arch/x86/core/acpi.c:190:24: warning:
taking address of packed member of 'struct acpi_xsdt' may result in an
unaligned pointer value [-Waddress-of-packed-member]
190 | for (uint64_t *tp = &xsdt->table_ptrs[0]; tp < end; tp++) {
To avoid the warning, use an intermediate void * variable.
More info in #16587.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Storing the state where this is the first GDB break can be done
in the main GDB stub code. There is no need to store the state
in architecture layer.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some architecture-specific functions to read/write
registers for the GDB stub. This is in preparation for the actual
introduction of these functions in the core GDB stub code to
avoid breaking the build in between commits.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the arch_mem_domain_*() functions to return errors.
This allows the callers a chance to recover if needed.
Note that:
() For assertions where it can bail out early without side
effects, these are converted to CHECKIF(). (Usually means
that updating of page tables or translation tables has not
been started yet.)
() Other assertions are retained to signal fatal errors during
development.
() The additional CHECKIF() are structured so that it will bail
early if possible. If errors are encountered inside a loop,
it will still continue with the loop so it works as before
this changes with assertions disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
replace with version.parse from packaging module.
prevent this warning message:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12. Use setuptools or
check PEP 632 for potential alternatives
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Call into z_thread_usage_stop() before ISR entry to avoid including
interrupt handling totals in thread usage stats.
This has to go into the assembly immediately before the callback-based
dispatch. Note that the dispatch code was putting the vector number
in RCX, which was unfortunate as that's a caller-saved register.
Would be nice to clean this up in the future so it lives in a
preserved register but it's mildly complicated to make work with the
way we do the stack layout right now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds arch_float_enable() and arch_float_disable() to x86-64.
As x86-64 always has FP/SSE enabled, these operations are basically
no-ops. These are added just for the completeness of arch interface.
Fixes#38022
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This function should be pinned in memory instead of simply
putting it in the boot section, as this function will be
used when new threads are created at runtime.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If generic section is not present at boot, the thread stack
may not be in physical memory. Unconditionally page in the stack
instead of relying on page fault to speed up a little bit
on starting the thread.
Also, this prevents a double fault during thread setup when
setting up stack permission in z_x86_userspace_enter().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
