In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This will be used by MSI multi-vector implementation to connect the irq
and the vector prior to allocation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The x86 paging code has been rewritten to support another paging mode
and non-identity virtual mappings.
- Paging code now uses an array of paging level characteristics and
walks tables using for loops. This is opposed to having different
functions for every paging level and lots of #ifdefs. The code is
now more concise and adding new paging modes should be trivial.
- We now support 32-bit, PAE, and IA-32e page tables.
- The page tables created by gen_mmu.py are now installed at early
boot. There are no longer separate "flat" page tables. These tables
are mutable at any time.
- The x86_mmu code now has a private header. Many definitions that did
not need to be in public scope have been moved out of mmustructs.h
and either placed in the C file or in the private header.
- Improvements to dumping page table information, with the physical
mapping and flags all shown
- arch_mem_map() implemented
- x86 userspace/memory domain code ported to use the new
infrastructure.
- add logic for physical -> virtual instruction pointer transition,
including cleaning up identity mappings after this takes place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We use a fixed value of 32 as the way interrupts/exceptions
are setup in x86_64's locore.S do not lend themselves to
Kconfig configuration of the vector to use.
HW-based kernel oops is now permanently on, there's no reason
to make it optional that I can see.
Default vectors for IPI and irq offload adjusted to not
collide.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are now common code, all are related to user mode
threads. The rat's nest of ifdefs in ia32's arch_new_thread
has been greatly simplified, there is now just one hook
if user mode is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_x86_thread_page_tables_get() now works for both user
and supervisor threads, returning the kernel page tables
in the latter case. This API has been up-leveled to
a common header.
The per-thread privilege elevation stack initial stack
pointer, and the per-thread page table locations are no
longer computed from other values, and instead are stored
in thread->arch.
A problem where the wrong page tables were dumped out
on certain kinds of page faults has been fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now dump more information for less common cases,
and this is now centralized code for 32-bit/64-bit.
All of this code is now correctly wrapped around
CONFIG_EXCEPTION_DEBUG. Some cruft and unused defines
removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some code for unwinding stacks and z_x86_fatal_error()
now in a common C file, suitable for both modes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is moved from arch/x86/include/ia32/kernel_arch_func.h to the
common header arch/x86/include/kernel_arch_func.h so it can be shared.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use different headers for kernel_arch_{func,thread}.h when in
CONFIG_X86_LONGMODE, and add placeholders for Intel64 versions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Refactoring 32- and 64-bit subarchitectures, so this file is moved
to ia32/ and a new "redirector" header file is introduced.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
More clearly differentiate MVIC vs. APIC timer code, and use new APIC
accessors in include/drivers/loapic.h. Remove extraneous comments, and
other light cleanup work.
This driver is in need of a serious overhaul -- despite appearing to
have support for TICKLESS_KERNEL and DEVICE_POWER_MANAGEMENT, bitrot
has taken its toll and the driver will not build with these enabled.
These should be removed or made to work... but not in this patch.
Old x2APIC-related accessors in kernel_arch_func.h are eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Light reorganization. All MSR definitions and manipulation functions
are consolidated into one header. The names are changed to use an
X86_* prefix instead of IA32_* which is misleading/incorrect.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
There were many platforms where this function was doing nothing. Just
merging its functionality with _PrepC function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If dynamic interrupts are enabled, a set of trampoline stubs
are generated which transfer control to a common dynamic
interrupt handler function, which then looks up the proper
handler and parameter and then executes the interrupt.
Based on the prior x86 dynamic interrupt implementation which
was removed from the kernel some time ago, and adapted to
changes in the common interrupt handling code, build system,
and IDT generation tools.
An alternative approach could be to read the currently executing
vector out of the APIC, but this is a much slower operation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Always compare unsigned interger type with another unsigned
integer type. Currently in nios2, posix, riscv32, x86 and xtensa
we were comparing the _kernel.nested variable with a signed
interger type. Fixed this violation.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
MISRA-C requires that all declarations of a specific function, or
object, use the same names and type qualifiers.
MISRA-C rule 8.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rename _MsrRead() and _MsrWrite() to _x86_msr_read() and
_x86_msr_write() respectively.
Given that these functions are essentially implemented in assembly.
make them static inline. They can be inlined by the compiler quite
well, most of the time incurring in space savings due to better
handling of the cobbled registers.
Also simplifies the inline assembly, using constraints instead of
moving registers ourselves. Should shave off a few bytes from code
using these functions.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Besides the fact that we did not have that for the current supported
boards, that makes sense for this new, virtualized mode, that is meant
to be run on top of full-fledged x86 64 CPUs.
By having xAPIC mode access only, Jailhouse has to intercept those MMIO
reads and writes, in order to examine what they do and arbitrate if it's
safe or not (e.g. not all values are accepted to ICR register). This
means that we can't run away from having a VM-exit event for each and
every access to APIC memory region and this impacts the latency the
guest OS observes over bare metal a lot.
When in x2APIC mode, Jailhouse does not require VM-exits for MSR
accesses other that writes to the ICR register, so the latency the guest
observes is reduced to almost zero.
Here are some outputs of the the command line
$ sudo ./tools/jailhouse cell stats tiny-demo
on a Jailhouse's root cell console, for one of the Zephyr demos using
LOAPIC timers, left for a couple of seconds:
Statistics for tiny-demo cell (x2APIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 7 0
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, xAPIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_xapic 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_msr 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
See that under x2APIC mode on both Jailhouse/root-cell and guest, the
interruptions from the hypervisor are minimal. That is not the case when
Jailhouse is on xAPIC mode, though. Note also that, as a plus, x2APIC
accesses on the guest will map to xAPIC MMIO on the hypervisor just
fine.
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
- _arch_user_mode_enter() implemented
- _arch_is_user_context() implemented
- _new_thread() will honor K_USER option if passed in
- System call triggering macros implemented
- _thread_entry_wrapper moved and now looks for the next function to
call in EDI
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
