- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to the PRMs of both ARC EM & ARC HS families on entry
to Fast IRQ handler ARC hardware saves PC (Program Counter) value
of where processor was right before jumping to the IRQ handler into
2 registers: ILINK & ERET.
But it turned out in case of ARC HS (at least in configuration with
Fast IRQs & 1 register bank) only ILINK was populated with the
previous PC, while in Zephyr we relied on what we read out of ERET.
That lead to funny issues when CPU returned from IRQ handling
to some unexpected location.
And now with that precious knowledge we're switching to return
address recovery from ILINK so that with both families of ARC
processors (EM & HS) we may get reliably good results.
The wrapper is few cycles shorter/faster as well, as we may shave off
another extra instruction for transferring ERET value from its AUX reg
to a scratch core register to be later stored in the memory.
+----+---------------+---------------+--------------+
| | FIRQ | RIRQ | RIRQ(Secure) |
+----+---------------+---------------+--------------+
| HS | ILINK=PC | ILINK=PC | NULL |
+----+---------------+---------------+--------------+
| EM | ILINK=ERET=PC | ILINK=ERET=PC | ILINK=PC |
+----+---------------+---------------+--------------+
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Handle the difference of GNU & MWDT assembly for ARC-specific
code guarded by CONFIG_SMP define. That fixies SMP platforms build
with MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
align kconfig option CONFIG_ARC_CUSTOM_INIT to
CONFIG_INIT_ARCH_HW_AT_BOOT. Remove unused CONFIG_ARC_CUSTOM_INIT in
kconfig.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
The Inter-core Debug Unit provides additional debug assist features in
multi-core scenarios.This commit allows ARConnect to conditionally
halt cores during debugging.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
There is a register misuse in leaving tickless idle code, which would
destroy exception/interrupt status. This commit fix this issue.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
In old version nSIM, when cpu is sleeping, no response to
inter-processor interrupt although it's pending and interrupts
are enabled(SNPS JIRA issue P10019563-41294). Now this has
been fixed in nSIM version (2020.09), so we can safely remove it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
EMSK boards can't be reset between tests due to hardware configures.
MPU v3 configs in previous test could cause exceptions in the following
tests. This commit fixes this issue by restoring MPU registers initial
states at early init stage.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Previously MPU registers macros are only defined within its own header
files and could not be used by other part of program. This commit unify
them together.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
"arch_switch" is declared as an inline function in kswap.h,
it should be a wrapper of arch level switch. The difference
of declaration and implementation of "arch_swich" causes
warning from MWDT compiler.
Use "arch_switch" with proper declararion (which is just
wraper for "z_arc_switch") to do conext switch for ARC.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Make the assembly codes compatible with both GNU
and Metaware toolchain.
* replace ".balign" with ".align"
".align" assembler directive is supposed by all
ARC toolchains and it is implemented in a same
way across ARC toolchains.
* replace "mov_s __certain_reg" with "mov __certain_reg"
Even though GCC encodes those mnemonics and even real
HW executes them according to PRM these are restricted
ones for mov_s and CCAC rightfully refuses to accept
such mnemonics. So for compatibility and clarity sake
we switch to 32-bit mov instruction which allows use
of all those instructions.
* Add "%%" prefix while accessing registers from inline
ASM as it is required by MWDT.
* Drop "@" prefix while accessing symbols (defined in C
code) from ASM code as it is required by MWDT.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
/#
GNU toolchain and MWDT (Metware) toolchain have different style
for accessing arguments in assembly macro. Implement the
preprocessor macro to handle the difference.
Make all ASM macros in swap_macros.h compatible for both ARC
toolchains.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
* Move switched_in into the arch context switch assembly code,
which will correctly record the switched_in information.
* Add switched_in/switched_out for context switch in irq exit.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Saves us a few bytes of program text on arches that don't need
these implemented, currently all uniprocessor MPU-based systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All of these should be no-ops for the following reasons:
1. User threads cannot configure memory domains, only supervisor
threads.
2. The scope of memory domains is user thread memory access,
supervisor threads can access the entire memory map.
Hence it's never required to reprogram the MPU on the current CPU
when a memory domain API is called.
This does not address the issue #27785 if a user thread in the domain
is running on some other CPU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Use CONFIG_TRACING_ISR to exclude tracing ISRs just like other
architectures.
Also, z_sys_trace_isr_exit was not defined (It was renamed some time ago
and this was forgotten...)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
unify how XIP is configured across architectures. Use imply instead of
setting defaults per architecture and imply XIP on riscv arch and remove
XIP configuration from individual defconfig files to match other
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MISRA-C wants the parameter names in a function implementaion
to match the names used by the header prototype.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This interface is documented already in
kernel/include/kernel_arch_interface.h
Other architectural notes were left in place except where
they were incorrect (like the thread struct
being in the low stack addresses)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch_new_thread() passes along the thread priority and option
flags, but these are already initialized in thread->base and
can be accessed there if needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rewrite 'exit_tickless_idle' macro to make code more readable.
No functional changes intended.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Switch nSIM from custom ARC UART to ns16550 model. That will
allow us to use zephyr images built for nSIM on other platforms
like HAPS, QEMU, etc...
This patch do:
* switch nSIM board to ns16550 UART usage
* change nSIM simulator configuration to use ns16550 UART model
* drop checks for CONFIG_UART_NSIM in ARC code
* update nSIM documentation
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
* The stack pointer (SP) register points to the lowest-used address of
a downward-growing stack, so memory address [sp] is used, we can't
modify it.
* In firq_no_switch case, we need to pop sp, which pushed before
_isr_demux function in firq_nest function.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The ESF contains register file contents including program
counter when the exception happened. If non-NULL and we
have ARC_EXCEPTION_DEBUG enabled, dump its contents to the
log stream.
Other arches do this already.
There is no need to read ERET, the ESF already contains the
interrupted PC value.
A future enhancement could create an option to additionally
push callee-saved register context into the ESF so it can
also be dumped out, but this patch does not address this.
A future enhancement could also convert the syscall
stack frame pointer passed to arch_syscall_oops() into
an ESF so that context of the failed system call can be
inferred.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Because the issue of nsim, the sleep instruction doest not work
correctly when SMP is enabled. A workaround is introduced in commit
d56a12d955, this workaround should be enabled only for SMP case in
nsim.
For other cases, no need of this workaround.
This commit fixes#24276
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
ARC_MPU_VER 2 has a strong requirement in
* size, must be >= 2048 bytes and power of 2
* start address must be aligned to size
It may bring a big waste of memory.
On the other hand, GEN_PRIV_STACK is used for ARC_MPU_VER 2,
it conflicts with MPU_STACK_GUARD.
So considering the limmitations, remove MPU_STACK_GUARD for
ARC_MPU_VER 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Because ARC MPUv3 doesn't have a strong alignment requirement
as ARC MPUv2 does, no use of GEN_PRIV_STACK for it.
Without GEN_PRIV_STACK, all stack elements can be in one stack object.
See #24048.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
drop the original C macro based allocation of privilged stack as
it may cause the waste of memory for ARC MPUv2.
now use the way of GEN_PRIV_STACK to generate privilege stack as
other archs did, e.g. ARM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
