Enables directly add 16-bit value at the end of operational buffer.
Value is converted to little-endian format before is appended.
Position of buffer's tail is updated during addition.
Usage of bt_buf_add() call enables monitoring available limited room
in the buffer when CONFIG_BLUETOOTH_DEBUG is on.
Change-Id: Id7ac62cd3b11ef03302e94185a7faae747eccb20
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Update test_15_4 makefile and prj files to support
CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART build.
Change-Id: I8247b67b1beac18f7c62349d049694cf5aa437ca
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for 802.15.4 dummy radio driver to send frames
through qemu uart and and receive frames through uart. So
two qemus can send and receive 802.15.4 frames.
Change-Id: I325281d04234f7ec07c66bf31691c18a9d7c4d93
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This adds bt_gatt_discover_descriptors which can used to discover all
descriptors in the given range.
Change-Id: Idf93852ef9d8ba3bfce20dc0b95f4e11aa0dc73d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the advertising event type is not connectable, we shouldn't
try to establish connection with this device.
Change-Id: I5be6427858856a6318553ddc0acf53aa2d991b7b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If we have IRK stored for device we try to connect to,
it means we should look up bt_conn based on identity address,
not the address from advertising or connection complete event.
Change-Id: Iccbd766acf9a62cfe5e967cf54597854881f37d5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
check_pending_conn gives more information about what this function
is actually doing.
Change-Id: Id21580e03bb1c341c7cf3671a666e385738fb3d4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
During allocation ATT pdu buffer there's possibility to precheck
whether length of such buffer doesn't exceeds ATT MTU.
Change-Id: I7f729e4d7f7474d7f33e417ea61a00ceeb7426c5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds above function to stop ongoing advertising.
Change-Id: I16b3913524a61e844a81cbe733f2b8e6072ab442
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
When we already have bt_keys object and want to ensure that it
contains a certain key type it's wasteful to have to go and call
bt_keys_get_type() (because of the extra lookup it'll do).
Change-Id: I97831e6817e734d7e8b6aa18c7917736577f3438
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds function handler for Find Info Response PDU which call the
request callback:
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Find Information Request (0x04) len 4
Handle range: 0x0010-0x0011
> ACL Data RX: Handle 3585 flags 0x02 dlen 14
ATT: Find Information Response (0x05) len 9
Format: UUID-16 (0x01)
Handle: 0x0010
UUID: Characteristic (0x2803)
Handle: 0x0011
UUID: Heart Rate Control Point (0x2a39)
Change-Id: I981e9efe75f6eb032d9468549272c82720cb133d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch, Identity Information and Identity Address
Information are properly received. There was a bug when
returning too early from smp_pairing_master function
and not setting BT_SMP_CMD_IDENT_INFO bit in allowed_cmds.
bt: bt_smp_recv (0x0010f054): Received SMP code 0x06 len 17
bt: smp_pairing_encrypt (0x0010f054):
bt: bt_smp_recv (0x0010f054): Received SMP code 0x07 len 11
bt: smp_pairing_master (0x0010f054):
bt: bt_smp_recv (0x0010f054): Received SMP code 0x08 len 17
bt: bt_smp_recv: Unexpected SMP code 0x08
bt: bt_smp_recv (0x0010f054): Received SMP code 0x09 len 8
bt: bt_smp_recv: Unexpected SMP code 0x09
The return should be after distributing LTK, EDIV and Rand if
IdKey was not set.
bt: bt_smp_recv (0x0010effc): Received SMP code 0x06 len 17
bt: smp_pairing_encrypt (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x07 len 11
bt: smp_pairing_master (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x08 len 17
bt: smp_ident_info (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x09 len 8
bt: smp_ident_addr_info (0x0010effc):
bt: smp_ident_addr_info (0x0010effc): identity 88:63:DF:88:0E:83 (public)
bt: bt_smp_disconnected (0x0010effc): conn 0x0010badc handle 64
Change-Id: Ic98cf6fd6ad2f7e41c6cd506d39fc9a9571a491f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Instead of caring about stop_scanning() failure it's better to have
bt_connect_le() do "best effort" and simply try to continue in this
case.
Change-Id: I14896a4dfbe0bfd2564a190080743f0c9b05d174
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to check for BT_CONN_CONNECTED for these HCI events or
ACL data. Even if the connection is being disconnected the stack will
do the right thing when the disconnect_complete event occurs.
Furthermore, these branches were actually leaking the bt_conn if the
state wasn't connected after being looked up.
Change-Id: I2e22d67cb43a86e742663a896e853de02fe9e325
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make the reference counting of bt_conn clearer by having the reference
taken by the first state transition and released by the last state
transition handled in the bt_conn_set_state() function.
Change-Id: Iee04758fcc7f770e6ccfd351f33be60e7d646f19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removes a duplicated comment on the FIFO documentation.
Change-Id: Iff81fd0df67e23517c199c866542db28d12cc42a
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The bluetooth regression script now refers to PLATFORM_FLAG instead of the
obsolete BSP_FLAG variable.
Change-Id: I8cafc01b66004c7bdd76c03d3f3b6aeba134565d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the comments in ctors.c to more accurately reflect the current
state of constructors.
Change-Id: I8bea13ac9b56b4d7c6ce793f175666506fffa446
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I65baa148006fbda916904914844b1b347f8ec654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I53e9994c794c6b4c292e776355a67b7923c2fdb8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Improves code consistency by abstracting the architecture directory in the
set of assembly include paths.
Change-Id: I4b3638419a1242cb0628f128c5e3b82c3357d83c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Lack of some includes
- And bogus function signature
Change-Id: I4d504de83efeaa223c99da3e6fbe69b6e85823ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The contents are split in two: Zephyr Kernel and Zephyr Project. Under
Zephyr Kernel is all the content directly about the code base. Under
Zephyr Project is all the content about the development of the kernel
and of applications. Only the Doxygen document needed to be split. The
output of the in-code comments was placed under the Zephyr Kernel while
all the Doxygen guidelines and the extraction process information were
placed under the Zephyr Project.
Change-Id: I4f7b674d19449968e976b63f40bcaa9737cc0ecb
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Move the comments from k_event.c file to event.h. Only external API information was moved.
Minor changes to adapt comments and parameters.
Change-Id: I05124fc48720105a246826c94f3f21a6e30d6043
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit moves the comments from the k_semaphore.c file to the
semaphore.h and kernel_main.h files.
Change-Id: Ica86945e738f1f61b8ed216981bce55351029645
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ISR documentation changed to incorporate new ISR functionality.
Change-Id: I35a95dab9f4fd407ff297f55faa1e3ebbefc8064
Signed-off-by: Carol Lee <carol.lee@windriver.com>
This text was originally used to illustrate the layout that would
be used for all microkernel object documentation, but it's no
longer needed since enough files have been converted to make
the approach self-evident.
Change-Id: I2646f7e7c0e541dd5930c13b2319aa85205a8111
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
See
https://groups.google.com/forum/#!topic/ia32-abi/cn7TM6J_TIg
for more details.
• Support IA32 without FPU.
• Minimum ISA: Pentium ISA without x87 FPU instructions.
• Don't allow mixing i386 object files with Intel MCU object files.
• Support floating point with software emulation:
a. Long double is the same as double.
b. Use __float80 for 80-bit double.
• Minimize memory footprint:
a. Code size
b. Data size
c. Stack size
Here is the draft of Intel MCU psABI. The differences from IA32
psABI are
1. The minimum instruction set is Intel Pentium ISA minus instructions
for x87 floating point unit.
2. There are no x87 floating point registers.
3. There are no vector registers.
4. Segment registers are optional.
5. Support for TLS relocations are optional.
6. Scalar types larger than 4 bytes are aligned to 4 bytes.
7. There are no vector types.
8. _Decimal32, _Decimal64, and _Decimal128 types are optional.
9. long double type is the same as double.
10. float, double and long double types are passed and returned in
general purpose registers.
11. _Decimal32 and _Decimal64 types are passed in general purpose
registers.
12. Aggregate types no larger than 8 bytes are passed and returned
in general purpose registers.
13. Stack is 4-byte aligned.
14. The auxiliary vector support is optional.
15. Register %edx has undefined value at process entry.
16. New ELF machine code: EM_IAMCU.
17. New predefined C/C++ pre-processor symbols: __iamcu and __iamcu__
Change-Id: I6a0c45ad22d8f710b6f37a041aaa2fc1bf0b1c39
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option was remove as part of linker script cleanup
a few months ago.
Change-Id: If04d69096eb3ef682d72258be90bf710ed931e69
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If set, 'make qemu' will direct its console output to a named pipe and
disable the interactive monitor. Intended for use with the new sanity
check system which will parallelize test execution.
Change-Id: I902f77c02ed3f210891ff13147afea890e64d9c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An additional level of indent after line continuations makes this file
easier to read.
Change-Id: I2f5de9b811a5e725639d3a0c2cd62196c2a9e9c4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes the tables of the APIs so that they are displayed properly on the
HTML output.
Change-Id: I616def73e84d5b0ec51e5bc3fa0ce3673e9af344
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
