Cache input type and validate TLV according to it. Check
uart_send return values.
Change-Id: Ib1f784a776176763773fead2d464330a4325ba19
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If JustWorks pairing is used for pairing don't report failure.
Change-Id: I23cee54a74dd021c1f273d987ca67066452d7801
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Flags for indicating if stored TK is valid and if confirm sending
was delayed are required for properly handling passkey entry input.
This is to avoid using incorrent TK or sending SMP commands in invalid
order.
Change-Id: I11e162331e93311f292f0723fc9f860c753d7d96
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to request passkey being entered by user.
Change-Id: I6a56c65ca689473659a13c19f8578058476d2685
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to track which pairing method was used and is
a preparation for storing information if resulting keys
are authenticated.
Change-Id: Ib9fc762d19bd4add6f0b431745eeb9e2780016d4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes the code more consistent by always trying to name bt_buf
variables as buf.
Change-Id: I10d54260c5cf2f6aea5300668d5eb68f3da2a8ba
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The dtls-client app will run in Zephyr and will send network
packets to host process (dtls-server) via SLIP.
Change-Id: I51e3424193e6a7169d9921ba56466bb0c0c0d4d1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This dtls-server app is run in the host side. It will
connect to Zephyr via UART using SLIP. The app will
listen DTLS data in socket 4242 and will reverse the returned
bytes and send them back to the sender. The application
supports both IPv4 and IPv6 protocols.
Change-Id: I8d37b0d3318bf6a3a5365e7d2c64eae83a1f3285
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Handle the new error callback type, a ROR interrupt is irrecoverable.
- Removing the fifo pre-fill: this should never be done that way. It's
up to the controller to request via an interrupt to get its fifo
filled-in. (TFS bit on SSSR register is the one requesting such
filling)
- Disabling the controller once completed (following transfer will
re-enable it)
- Removing useless debugging info
Change-Id: I466a8efb65a41f3315a6a36e10ea519d0c4b01e9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such type will be used in case of unrecoverable error on driver side
while transceiving.
Taking the opportunity to fix spi_transceive declaration as it should be
static.
Change-Id: I7392f93b34cf6d74900c844607cf03e741837876
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change DEBUG option into something more specific.
Change-Id: If1f421fbf7d234ad6bfac410697205d5d74548c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Menu depends on X86, however some options are available
for all architectures.
Change-Id: I09cad39811319022d0323a4ff87d415346b5630a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option is being referenced all over the code but is not
being defined in Kconfig.
Change-Id: I181668ce7a35819804b8e6261f6cf27088843377
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes small errors on the asm implementation of arc
register reading and the built-in functions call.
Change-Id: Iea2df715eaefb25095770971ac03d441311abf16
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ns16550 was the only driver using those, and now that it properly uses
sys_io.h functions we can remove inByte and ouByte from ia32's board.h
files.
Change-Id: Id2a691b8ecf43baacd64bc9be09feb15ef9eb339
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was badly named: this routine initializes what cannot be done
statically, i.e. what has to be done dynamically.
We also do not have concepts of "node" anymore since the kernel is
single-node only.
Change-Id: Idde3183ca01ca3f70c5ae0e948734a965582ded8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When THREAD_MONITOR is enabled, not removing the fiber from the thread
list (a) would cause the list to be erroneous, and (b) would cause
corruption of the list if the fiber stack was reused to start a new
fiber (or any other usage really).
Change-Id: I622ffdbd146ec4b0e78b051d1b444fdf35efcd1e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the documentation of _thread_exit() to reflect the fact that a
task can call it if it does so with interrupts locked. A task or another
fiber cannot preempt a fiber, so a fiber can still call _thread_exit()
without locking interrupts. If a task locks interupts first then calls
it, no fiber or other task can preempt it either.
Change-Id: If8624842fc202a0917b0499458e14f95d7f461df
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will let us getting rid of old outByte/inByte functions.
Change-Id: I3344151c54f99e5e281ac8d3d027e0b810796111
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Grammar updates.
Corrected formatting to produce cleaner HTML output
Document structure is updated to reflect the current changes
within the entire documentation project.
Change-Id: Icc389ddec16ddfa40ecbbb5871af44563374415c
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Changes made to streamline using Gerrit recommended practices.
Changes included edits to grammar, punctuation, spelling,
word usage across multiple files.
Signed-off-by: steveballard123 <stephen.r.ballard@intel.com>
Change-Id: I286eb508abe10bb2ca0dd1b070fe7887fd5020e6
Rewrote and edited for clarity, punctuation, grammar, word usage.
Signed-off-by: Steve Ballard <stephen.r.ballard@intel.com>
Change-Id: I0332be9152312047a39067e7d610a563352abb1b
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since such controller is found on Quark x1000 (Galileo, ...), it will
need to get configured and/or enabled through PCI.
Change-Id: I16d00364edcb17653eaaf073e87b4e5850de7299
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using the OS provided sys-io functions for access to the registers
and lower level devices.
Change-Id: I1a88786189cbed0965f84146ffad9988a3b68a7b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This will initialize the UART console port at an earlier stage than
usual in order to get early debugging outputs.
Change-Id: Ica90fe3481687ef20488b59f6d554a8af1d22559
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unset by default. When set, this options will enable early printk
through the console. Such option is only meant to be used for debugging
purposes.
Change-Id: I6690f94b0922826bd2666ef0488dcabe2f131531
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Device ID was wrong
- Setting default class id
Change-Id: I9fd1df284eca4067c21beffa7599307a40be5144
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A fix for a mistake introduced in commit 1a7357.
Change-Id: I411937c85f29abb934ae5385f4858950f5d76887
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This way, it will be possible to use Galileo and it's UART ports without
PCI_ENUMERATION set.
Change-Id: I9498aca818b128a6ee69fde21aa5c4b9cd6bc1ad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to keep track of PCI class's bus and dev. First, there might be
more than 1 bus and/or 1 device which would hold the same class.
Secondly, with the new PCI_ENUMERATION option, enumeration PCI device is
now optional and it's advised to unset such option and statically
configure the PCI information of the devices (to gain in booting time
and code size). So finally removing all of this.
Change-Id: I395d08c8f6f5e76431af59aa6fc9b30d703f2e75
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is being referended by the same file
but is not being defined anywhere.
Change-Id: I5e0ec4c29cba773a5256bae52190a117fcc12bf3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put relevant items under the same menu and move compile options
out of general setup and make it a top level menu.
Change-Id: I8125418e19cb6ffd08825d30c07058ec0d943ba3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I151b3c6516b9b5a38ab0da2948c951eb69d57498
Signed-off-by: Adrian Pochiu <adrianx.pochiu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _ARC_V2_IRQ_VECT_BASE register must be set to the vector table in
flash.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change-Id: Ied5451c98222f545cd669967023aef26c3d8e48e
Revises and supplements information on concepts.
Change-Id: I7dd9dd2e99cd5d975cc0f617b076dcf13c414fd0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
