Provide the proper irq for i2c, gpio and spi. And make relevant drivers
getting enabled easily once their domain is selected.
Change-Id: Ib8a428e11b6163a1b370b23baa34ea2fab733565
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Provide the irq flags to IRQ_CONNECT_STATIC
- Provide the actual IRQ for that controller
Change-Id: If660baca7e92065cfdb588a2ae86ff13da0918eb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without that, it won't built when enabling support for dw i2c in
quark_se-x86.
Change-Id: Icce26488d870c273516dc9f34555176122bcb9c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Build the actual driver when relevant
- Provide the IOAPIC stub
- Provide the IRQ flags for IRQ_CONNECT_STATIC
- Set the default IRQ priorities
Change-Id: Iea20ef67c92cf7f48791fba5a8021448b7059950
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SYS_GET_DEVICE() needs the name set in DECLARE_DEVICE_INIT_CONFIG() not
the one in IRQ_CONNECT_STATIC().
Change-Id: Id1ed66953c863531411b34594ffed669ad524ef5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That fixes a build error. Platfom's board.h have to provide such flags
if they enable dw gpio 1 controller.
Take the opportunity to provide the right isr to IRQ_CONNECT_STATIC.
Change-Id: I16900ea04f7f7c5d3c99b93a92b00c1f651494de
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to always look-up for keys on security request.
Instead use cached keys if present, if not update cache.
Change-Id: I375842beb4c461418aea6a40350f797ca7b6264c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Looking up for CSRK to sign local PDU or verify remote signature
shouldn't add those keys in case those are not present (which is
done by get function).
Change-Id: Iec271a9dddd2cd319f153cec6e19fc2408ee0896
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the beacon support is activated, then we join the network
and start to send beacons.
Change-Id: Iffd0f05008e6a2463debb53ca73eb142ff60488a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable 802.15.4 beacon statistics support.
The 802.15.4 stats are printed periodically together with other
statistics.
Change-Id: I844a27224017a9d28cdbc166471523aa366da315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can select whether the beacon support is activated or not.
Change-Id: I8fd22af73cfca0dd4f2182bf98bc4b3571ac1f8f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This refactor code that is used to generate LTK and DHKey check value.
Duplicated code is factored to helpers reducing code size. Resulting
code is simpler and much easier to understand.
Change-Id: I1bb5a72959b9196bc472f069e9be5857d38dbcad
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Selects right ACL Tx MTU and semaphor based on connection link type
and indirectly controller buffers capabilities.
Change-Id: I1df1ba81e6b09d9d5bdcd34a93d9a3d255133143
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Make and use helper functions to get ACL Tx packets max length (MTU)
and get semaphore syncing out Tx packet to controller.
Change-Id: I52f60a71c6b179ff300b4fd21da27174e9d825d9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This use struct nano_sem to control the credits so when sending if the
credits hit zero it now waits more credits to continue instead of
failing.
Change-Id: I2da4692eaa16828f74a1df4346583258bb4cf8f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_send which can be used to send data to
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x01 dlen 17
Channel: 64 len 24 [PSM 128 mode 0] {chan 5}
a0 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ........
Change-Id: I753e301b1125ef21a345ab96470f15bc53a4869a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds support to connection object allowing to set the link type.
At the moment only LE link is used since LE connection handling
is implemented when BR/EDR support is enabled.
Change-Id: I5204a93670308b0151deaa98106a1551b9b39493
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Error should be responded if no previous attribute of the same type was
read (added to response buffer). In case if previous attributes were
added to buffer no error should be responded and read initiator should
perform read by type with increased start handle.
Change-Id: I31c4469e172a496890f049d9304a03673506c5f3
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds support for handling connect command in tester
application.
Change-Id: Ia35bcb33caf59b8df4a3cdc01c12d58fdeeecfe9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If local IO capabilities allow MITM and LE SC is enabled then
FIPS level is reachable.
Change-Id: Icfb32fbffa0355117b6723d641a6d3db38feb87d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If P256 key is present then authenticated link has FIPS security level.
Change-Id: Iaf50b83ac6973bbd40e5ef57bf1e6375eedf6b12
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This runs smp_g2 function with test vectors from Core
Specification 4.2.
Change-Id: I96ef51e9133182a38c3fd007764bdd633d8f9e3f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to display passkey and confirm if it matches remote
device.
Change-Id: I22f706b6441210ef426702ec290a05112e06a4e2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch allows user to confirm or reject passkey. If passkey was
confirmed we proceed with pairing (depending on SMP state). If
passkey isn't confirmed pairing is cancelled.
Change-Id: I7a286b51957bee1064342625f2bc3f04124a82de
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This add support for generating Passkey for confirmation.
Change-Id: I3b66675a5410292ebe05c66d77e7b4c7a95a2896
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to request user to confirm displayed passkey with remote
device. This allows to have authenticated LE SC link resulting in FIPS
security level.
Change-Id: I5b6c1666e3d1687cc04c5d66529372db090dd000
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The attribute protocol Read By Type is used to perform
Read Using Characteristic UUID procedure. This procedure
is used to read characteristic value if Characteristic Value UUID
is known, while handle is not known.
Errors received from application like Insufficient Encryption
Key Size must be send as a response to Read By Type Request
> ACL Data RX: Handle 64 flags 0x02 dlen 11 [hci0] 94382.244804
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0003-0x0003
Attribute type: Unknown (0xaa51)
< ACL Data TX: Handle 64 flags 0x00 dlen 9 [hci0] 94382.255987
ATT: Error Response (0x01) len 4
Read By Type Request (0x08)
Handle: 0x0003
Error: Insufficient Encryption Key Size (0x0c)
With this patch we can pass TC_GAR_SR_BI_11_C test.
Change-Id: Id47109f673cb725b2edd9cc0e154cc055fc8d0ef
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In smp_f6 local and remote random was in wrong order in
bt_smp_dhkey_ready.
Change-Id: Iba6ee6595c1d8e873d72571d1e4fb3d0c0b9717e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch fixes checking permissions and sending response to read by
type request. If multiple (or if one is found) attributess are found
within handle range and first of them don't have read permission,
error should be send. If any of attribute don't have read permission
but isn't first in set, the attributes before this attribute should
be returned.
Change-Id: I532a8701521505c02845de5db62c94f7edc9d567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Because of the way the loopback tester works, it needs much
bigger stack when sending packets in TX fiber.
Change-Id: I360f0cf1f35e654cb139565f19f24628fb5ab5ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the 802.15.4 radio driver tells there was a TX collision,
we must resend the frame. The resent and failed network packets
were not freed properly which eventually eat all memory reserved
for this purpose. Now the resent frames are discarded after
resending has failed couple of times.
Change-Id: I421e680605a0d164272a786edf8e15fe4c712d03
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The earlier 1kb stack was too small.
Change-Id: Iaa0b6e375cc79a7066bee9ec3a114246fb2ed377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We run event timers (etimers) checker every two ticks in order
not to loose events that are scheduled in very short intervals.
These events can come for example when network driver wants
to resend network packets.
Change-Id: Id48977f4de66583351551b5bf403d6e230d189c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ctimers are not run without this. Callback timers are
used for example when retransmitting network packets.
Change-Id: Iae55848e615814d89573df326a2c20bb8ca88230
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 4kb stack was too big so setting the stack to 1536 bytes.
Change-Id: I648d826225dd6312bba15100acf79e3783609d7a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to export ctimer_process so that net_core.c can
call it and let it set the corresponding event timers.
Without this the timers would not be called properly.
Change-Id: I623b60420eacfe326f6b18d89f3e008cc56379fc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that allows the code to busy wait usec timeout.
Change-Id: I6c0bbe33a98d45c58667e1400e0ebcdc59d28bad
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove testcase.ini from net/test/test_15_4 from microkernel
version temporarily.
Change-Id: I1ee5d80142c6b2210629842e5e8d83370299657d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds missing connection unref in disconnect command. Also
lightly status setting was refactored.
Change-Id: Ic2502d8df15e45c4aea25632642af3d8a4fb23cc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
