Currently the TCP commands work only for legacy TCP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix GCC "warning: 'ipv4' defined but not used [-Wunused-variable]" and
"warning: 'ipv6' defined but not used [-Wunused-variable]" when either
IPv4 or IPv6 support is not enabled.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
On processing a DNS server option, which re-initializes the DNS resolve
context, also cancel all pending DNS queries before closing the old DNS
resolve context. Otherwise, `z_clock_announce()` will later work on the
re-initialized context once the queries expire and crash because the
reference to the timeout function `query_timeout()` has been cleared.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use same format string when printing information that certain
config option is not enabled. This saves some flash as the
same string can be shared in the shell.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The earlier code was always queuing the FIN that is sent when
connection is closed. This caused long delay (200 ms) before the peer at
the other end noticed that the connection was actually closed.
Now check if there is nothing in the queue, then send the FIN
immediately. If there is some data in the queue, flush it when a valid
ack has been received.
Fixes#19678
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With `CONFIG_NET_NATIVE`, offloaded drivers can specify capabilites with
`NET_IPV4/6` configs, so there is no longer need to handle socket
offloading separately.
Also, initialize hints structure with zeros, as according to man pages
unused fields should be set to 0:
`All the other fields in the structure pointed to by hints must contain
either 0 or a NULL pointer, as appropriate.`
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A socket-offloaded interface should bypass interface initialization in
the same way as net-offloaded interface does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This function will be useful in shell when we want to monitor
the amount of bytes transferred and want to clear earlier
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
application to the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
network device driver to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send a Echo-Reply to every Echo-Request. This code does not verify
if the ppp stm is in LCP Opened state. See rfc1661 section 5.8.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Try to figure out where the ping reply should be sent if there
are multiple network interfaces in the system.
Fixes#19612
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MQTT transport API functions are already documented in
mqtt_transport.h so need to duplicate them in individual
transport .c file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Provides a way to clone a net_buf_simple without altering the state of
the original buffer. The primary usage scenario is for manipulating a
previously allocated PDU inside a buffer without altering the length and
offset of the buffer.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
create_ipv6_answer() function is behind #define's but get used behind
IS_ENABLED(CONFIG_NET_IPV6), which is not allowed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Cast a %lld argument to long long int. This is causing warnings on
recent GNU Arm Embedded toolchains, which fail the build with
-Werror=format=.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
* The issue is found in supporting offload module esp8266
* For device like esp8266, it's responsible for tcp/udp handling,
no need of net_tcp related functions
* This commit is only tested for esp8266, no gurantee for other
modules
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Currently the CONFIG_NET_ROUTING option has limited use as there
would be some entity that populates routing table. Previously it
was RPL that did it but RPL support was removed some time ago.
Fixes#16320
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are getting an old net_context, clear the content of it
in order to make sure we do not have old data in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to re-use net_context.user_data field as in many places
(like in accept) it is expected to contain pointer to net_context.
Storing the socket flags will corrupt the value. To simplify and
make things less error prone, use socket specific field in net_context
to store the socket flags.
Fixes#19191
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The socket flags are stored in void* so we need to use uintptr_t
instead of u32_t when manipulating the flag variable.
Fixes#19181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to make sure that net_pkt_clone() sets cursor correctly.
This cursor position is needed so that we can skip IP header
for incoming packet properly. Not all applications need to know
the cursor position of the cloned packet. Unfortunately we cannot
know that in advance so just set the cursor to correct position in
the cloned packet.
Fixes#19135
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If socket is marked non-blocking, then accept() will return immediately
if there is no one connecting.
Fixes#19103
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SNTP is UDP-based protocol, and thus not reliable. Previously,
high-level aka "simple" SNTP just issues a single request via
the low-level SNTP API. Instead, send multiple requests, starting
with a small timeout, and exponential backoff, repeated within
timeout specified by user in call to sntp_simple().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive a multicast IPv4 or IPv6 packet, then we need to
deliver it to all sockets that have installed a handler for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If proto field in socket() call is set to 0, then we should have
a sane default for it that depends on the type of the socket.
Fixes#18873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we are returned IPv4 address but the hints says IPv6, then
return error as currently we do not support AI_V4MAPPED addresses.
Same check for IPv6 if we want only IPv4 address.
Fixes#18870
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Issue noticed with following scenario.
1) TCP server is listening for connections but will handle
only one connection at a time (e.g. echo-server sample)
2) Client A connects, and the connection is accepted.
3) Client B connects, instead of denying a connection,
it is "auto" accepted (this is the actual bug) even
if the application has not called accept().
4) After the connection A is closed, the connection B
gets accepted by application but now the closed
connection A will cause confusion in the net-stack
5) This confusion can cause memory leak or double free
in the TCP core.
It is not easy to trigger this issue because it depends
on timing of the connections A & B.
Fixes: #18308
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we are closing connection before the connection was established,
then unref the context so that the cleanup is done properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds an explicit inclusion of toolchain.h from
ieee802154_frame.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by
ieee802154_frame.h; these being not defined can easily go unnoticed and
cause unexpected behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When using offloaded network, an L2 is never assigned to the net_if.
Only certain portions of the net_if code are referenced such as:
net_if_up()
net_if_down()
And these functions make use of several L2 references:
get_flags()
enable()
Let's add checks to make sure we don't deref a NULL when using these
functions.
Fixes the following exception on K64F and other HW which can make
use of offloaded network HW:
FATAL: ***** Reserved Exception ( -16) *****
FATAL: r0/a1: 0x00000010 r1/a2: 0x0000644f r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x2000474c r14/lr: 0x0001475b
FATAL: xpsr: 0x00000000
FATAL: Faulting instruction address (r15/pc): 0x0001b1cd
FATAL: >>> ZEPHYR FATAL ERROR 0: CPU exception
FATAL: Current thread: 0x20004c4c (unknown)
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18957
Signed-off-by: Michael Scott <mike@foundries.io>
Corrected the amount of bytes copied for port handling in parse_ipv6
to prevent reading past the boundaries of the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When the firmware_pull mechansim sends the callback to notify the
sample of a new firmware block, the user supplied buffer can be
smaller than the CoAP BLOCK_SIZE setting. To handle this case,
we loop through the payload and fill the user supplied buffer with
smaller chunks.
Unfortunately, the last_block calculation is done outside this loop
which causes several callbacks (while in this loop) to have
last_block true. Let's fix this by adding a small check to make
sure we're at the end of the current payload block before notifying
the user of a last_block.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16158
Signed-off-by: Michael Scott <mike@foundries.io>
The mDNS packet receive had issues:
* The DNS id needs to be 0 for both sending and receiving, we did
not accepted 0 incoming id.
* The mDNS response does not have any questions in it so we just
need to skip the question count checks in response.
* Skip the Cache-Flush bit in Class field so that we can properly
parse CLASS_IN value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In DNS server init, print information whether the DNS server
is mDNS or LLMNR one. This way we do not need to remember what
IP addresses are used either of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Current JSON formatting for float32/64 is broken in a similar way as
plain text. Let's use the newly fixed logic for plain text to
generate the float32/64 values in the JSON string.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Do not try to memcpy() the same buffer to itself.
This one also reverts commit 112ecb7290
("net: gptp: Fix for coverity CIDs 203471 and 203464") as that
did not fully fix the issue.
Coverity-CID: 203464
Coverity-CID: 203471
Fixes#18394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the extension, like HBHO, sub-option length is
not too large.
Fixes#16323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the bootstrap support was added, it looks like I somehow missed
the handling block in the engine.
Let's add it now to fix boostrap support.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18080
Signed-off-by: Michael Scott <mike@foundries.io>
- LWM2M_SECURITY_INSTANCE_COUNT wasn't following the standard of
having the unconditional default in the last position
- LWM2M_SERVER_INSTANCE_COUNT needs another instance when
bootstrap is enabled.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M boostrap support is enabled via the config option:
LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP. If enabled, this config sets
the default # of server and security instances. However, this is
not working correctly because LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
is defined below it's uses in the Kconfig file.
Let's move the RD_CLIENT configs higher in the Kconfig to fix this
behavior.
Signed-off-by: Michael Scott <mike@foundries.io>
If no challenger went to replace the best port/vector, then the best
port is still the global_ds and thus point to the same memory: no need
to update the global_ds then.
Coverity-CID: 203471
Coverity-CID: 203464
Fixes#18395
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like the logic to count rejection is missing. Removing count_rej
variable, and set a comment about initializing the code to the right
value once this logic will be in.
Coverity-CID: 203514
Fixes#18398
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Simplify algorithm to skip (aka calculate length) of encoded domain
name in a DNS answer. Now it's fully compliant to RFC 1035 regarding
handling of compressed FQDNs. Additionally, bounds checking is now
performed by the parsing code.
Fixes: #18334
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203397
Fixes#18419
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203468
Fixes#18420
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When checking for total IP address counts, don't check
CONFIG_NET_IF_MAX_IPV6_COUNT twice. This was a typo for
CONFIG_NET_IF_MAX_IPV4_COUNT.
This was reported by IRC user: retfie
Signed-off-by: Michael Scott <mike@foundries.io>
This commit changes the Link-Layer Address Option length calculation
from hardcoded values to a numerical rounding up to full 8.
The length is calculated according to rfc4861 section 4.6.1.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
If the UDP socket is connected, then allow the user to leave
out the remote address in msghdr struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Commands were not gathered with the right macro
- bus fault access due to wrong declaration of iface_states external
variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The network to host byte order conversion is actually in place
on the network buffer. This prevents the reuse and forwarding of
RA packets. This commit uses temporary variables instead.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Take the targer link layer address option link laxer addres lenght
from net packets source addres instead if the interface.
This is usefull for 6LoCAN border translator (6LoCAN to Ethernet).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit implements net_pkt_shallow_clone. A shallow clone clones
the net_pkt but not the buffers. The buffers are only referenced and
therefor only freed when both copies of the net_pkt are freed.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commits adds support for reception of packets thats comes from
a Ethernet to 6LoCAN translator. This packets carry the Ethernet
MAC address (6 bytes) inline in the FF (First Frame).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
If sendmsg() is used for TCP sockets, the msghdr->msg_name is not
really used as the socket must already have been connected.
In that case just get the destination address directly from
net_context remote address field.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only net-shell calls net_ppp_ping() command, so make
it return the amount of time that it took to receive Echo-Reply
so the net-shell can print the round trip time value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface is point-to-point one which does
not need IP address etc, then no need to start DAD etc for
those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a protocol that we do not currently handle, then
return Protocol-Reject to peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP is started immediately when the network interface
goes up. This can be problematic especially when debugging the beast
so allow user to delay the startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch tries to avoid memmoves and buffer allocations when there
is enough space in the original buffer. Headers are still contiguous
but not in the same buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC uncompression.
The uncompression now tries to work in place on the original buffer
instead of allocation a new one. If there is not enough tail-room,
a new buffer is allocated and filled with the IP and maybe UDP header.
The compressed header is pulled from the original buffer and the
buffer is preserved.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
When net_pkt_skip skips the entire data in a net buffer, the cursor
still points to this buffer on data that is off by one.
Calling pkt_cursor_advance in net_pkt_is_contiguous fixes this and
moves the cursor to the next buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC. The compression now works inline
on the original buffer instead of allocation a new one.
Additionally DAM_11 (Destination address fully elided) has precedence
over DAM_10 (16 bit compressible) now.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Move CMake ExternalProject integration of OpenThread to the
CMakeLists.txt file within the OpenThread fork.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add BSD socket sendmsg() API that can be used to send data to peer
and also pass ancillary data to lower level of the network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User could have set something to optval in getsockopt() and we
need to copy the data to kernel optval so that the socket family
code can use the value for something.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the allocated net_pkt is larger than the network interface MTU,
then check if the IPv6 fragmentation is enabled and allow larger
net_pkt length as the IPv6 fragmentation will split the packet into
suitable parts.
Fixes#16354
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_pkt_pull() needs to move all the remaining data in the
net_buf instead of just the pull amount.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
It currently only listens to relevant events about network interface to
decide whether raising connected or disconnected event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARP, LLDP and GPTP functions have dummies in case of being disabled so
let's use IS_ENABLED() accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive IPv6 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When performing OTA using the LwM2M subsys, several logging errors
regarding log_strdup were noted. Let's fix these.
Signed-off-by: Michael Scott <mike@foundries.io>
If a sample wants to use the Zephyr implementation of mbedtls, it
enables CONFIG_MBEDTLS and sets any needed Zephyr-specific mbedtls
options.
Currently, the LwM2M subsystem selects MBEDTLS automatically when
LWM2M_DTLS_SUPPORT is enabled. Let's remove this and let the
LwM2M client sample enable mbedtls and it's options.
This mimics the behavior of several other network-related samples
and removes conflicts when selecting alternate implementations of
MBEDTLS.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17399
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_parse_peerinfo().
The functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_sprint_ip_addr(). The
functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
NOTE: Also fixes an issue where a NULL is returned when the IP address
is unknown. This usually ends up with a crash/abort in the logging
code.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
If we receive IPv4 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17427
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing an IPv4 router was missing, as well as finding the default
router for an IPv4 address.
Note howevere that IPv4 router features are not used anywhere yet. But
at least the API is there and is a 1:1 to IPv6, if that matters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- router lifetime is always a u16_t so fixing
net_if_ipv6_router_update_lifetime() signature.
- Coalescing router timers into one: this reduces the net_if_router
structure by 22 bytes
- refactor IPv6 and IPv4 router code so it's handled in generic
functions, to avoid duplicating 90% of the code for each family. This
also fixes the lifetime support for IPv4 which was missing.
Note however that IPv4 routing support seems to be missing as none of
the relevant functions are used anywhere yet.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_ipv6 by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_ipv6 can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 network interface
It starts to be interesting if it has 2+ network interfaces then.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_addr by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_addr can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 unicast IPv6
address. It's a nice memory improvment once it has 2+ unicast IPv6
address. Note that having IPv4 enabled along with IPv6 will also see
memory improvements since both IPv6 and IPv4 use the same struct
net_if_addr.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv4 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv4 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv6 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv6 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The hostname needs to have log_strdup() when printing it.
Also it is useful to print information if the sending fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- answer offset was 1 byte off.
- request offset, when copied into the answer, was off as well.
Fixes#16142
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Skip the TCP options before giving the data to application.
Without this, the TCP options would be passed to the application.
Fixes#17055
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
OpenThread did not verify if the interface provided in the net_mgmt
handler is actually an OpenThread interface. In result, when multiple
network interfaces were used, different interfaces were processed by the
OpenThread handler, ending up in a crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure the IPv4 and IPv6 socket addresses are initialized before
copying them. This avoids uninitialized memory access.
Coverity-CID: 199436
Fixes#17202
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the net_mgmt event has some info, like IP address, that
could be sent, then send it the same time. This is very useful
for the receiver of the event in order to know that is happening
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes the issue where observations are automatically reported using
the minimum period instead of the maximum. This causes notifications to
be sent more frequently than configured when the resource does not
change.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Current socket connect call implementation always takes
K_FOREVER timeout value, which blocks TCP connections
in case failure. TCP connections waits until it receives
SYN ACK. If there is no SYC ACK means, connect call is
blocked forever.
Added a Kconfig option to define timeout value. Default
value is 3000 milliseconds. User can modify it.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify dns_unpack_answer() function to check if the answer is
compressed or not, and return correct values regardless.
Fixes#16594
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change will allow an MQTT client to override the compile-time
keepalive if desired. The change is structured such that the
compile-time default will still be setup by calling mqtt_client_init,
but can be changed by the application before calling mqtt_connect if
desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/fdtable.h to sys/fdtable.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return value from close() can be ignored in sntp_close()
as it is not returning value to caller anyway.
Coverity-CID: 198863
Fixes#16584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If immediate logging is disabled, then we must use log_strdup()
when printing log string allocated from stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must query both IPv4 and IPv6 addresses if the hints parameter
is NULL i.e., user does not supply hints or if family is set to
AF_UNSPEC.
Fixes#16453
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment there is no real address for local CANBUS socket,
but we can still set protocol family of local socket to AF_CAN
so that for example net-shell "net conn" command can show
information about it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The neighbor cache did not contain link address type. This is not
causing problems atm but good to fix anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that iface is NULL when selecting IPv4 destination
address for a sent packet.
Coverity-CID: 198877
Fixes#16570
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The query->len does not take 'Terminator' into account, shift over
one byte to prevent overwriting it with next field (Type).
This fixes mdns_resolver sample.
Fixes: 87eb552dd2 (net/dns: Switch mdns responder to new net_pkt API)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that UDP header cannot be accessed so we need
to check that we do not do null pointer dereference.
Coverity-CID: 198866
Fixes#16581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Length should be at least of UDP header size but not bigger than actual
payload size.
Reported-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If a valid numeric IP address is provided as argument, it should
be resolved without contacting DNS server.
Also, implement handling of AI_NUMERICHOST.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Having a checksum of zeros in UDP means "missing checksum" and is a
valid case as per RFC 768:
"An all zero transmitted checksum value means that the transmitter
generated no checksum (for debugging or for higher level protocols
that don't care)."
Such support is made possible by adding a new Kconfig option named
CONFIG_NET_UDP_MISSING_CHECKSUM.
However, that is valid only for IPv4. For IPv6, see the RFC 2460
section 8.1:
"Unlike IPv4, when UDP packets are originated by an IPv6 node, the UDP
checksum is not optional."
So the UDP checksum will always be verified in IPv6.
Fixes#16375
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
From RFC 768, in "Fields":
"If the computed checksum is zero, it is transmitted as all ones"
Fixes#16379
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The 32bits one can hold up to about 50 days, this is more than enough
knowing that ARP request timeout is 2 seconds.
So reducing the request start time to 32bits.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses CONFIG_OT_PLAT_FLASH_PAGES_COUNT to calculate the # of
pages at the end of flash to use for storing OpenThread settings.
This calculation has an off-by-one error which sets the offset for
the storage area as 1 page of flash too low.
For example, on nRF52840:
- default setting for CONFIG_OT_PLAT_FLASH_PAGES_COUNT is 4
- flash size is 1MB (0x100000)
- flash page size is 4096 (0x1000)
- expected offset is 0xfc000
Using the current logic we get an offset of: 0xfb000
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16339
Signed-off-by: Michael Scott <mike@foundries.io>
Drop packet if it has broadcast destination MAC address but the IPv4
destination address is not multicast or broadcast address.
See RFC 1122 ch 3.3.6 for details.
Fixes#16276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv4_select_src_addr() should return global address
in the interface if nothing else is being found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive a multicast ICMPv4 packet, then send the reply back
with correct source address and not with multicast address.
Fixes#16257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If host is NULL and ai_flags are AI_PASSIVE in a call to
getaddrinfo(), need to return "any" address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
We replied to an ARP request that has the same Sender Hardware Address
than that of ours. Such an ARP request must be discarded, no reply
should be sent and translation table should not be updated.
Fixes#16110
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a packet is received with Ethernet source address different
from ARP's sender hardware address field, then DUT must use the
latter address in response packets.
Fixes#16098
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Libraries that use mbedTLS have been invoking
zephyr_link_interface(mbedTLS). It is not clear what the intent of
this code has been, but it is redundant with the mbedTLS build
scripts, so it can be safely removed.
In addition to being redundant, it causes problems as it introduces an
ordering dependency, with this code mbedTLS must be declared before
users of mbedTLS are declared. Since this code is redundant, this
ordering dependency is also unnecessary.
This code is believed to have been added early on by accident and
copied through cargo-cult programming since.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Calling functions like `net_if_start_dad`, `join_mcast_nodes` or
`net_if_start_rs` lead to L2 API function calls, which is not correct
for offloaded interfaces and leads to a crash. This is especially
problematic, as they are called in the default configuration.
Avoid calling these functions while an offloaded interface is brought up
by adding extra jump label.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case socket offloading is used, one might want to disable native IP
stack, both IPv4 and IPv6, to save memory. Currently it is not possible
due to preprocessor check. Prevent that by adding additional exception
for socket offloading.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- renaming functions to better names
- reordering functions place (register, then unregister for instance)
- centralizing logs to relevant place
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, there is no need for unspecified address bit. If specified address
bit is not set, then it will be obvious address is unspecified. Reducing
the amount of bits from 6 to 4.
This permits to reduce net_conn structure of 4 bytes. Its size is as
before indroducing node attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will optimize path when unused an connection is required or when
looking up a used one.
That said, at this stage, it bloats up the net_conn structure with 4
added bytes. More optimization will overcome this drawback.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of present #ifdef can be removed via using IS_ENABLED() macro.
Only small part of cache related logic still require #ifdef.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
During net_pkt/net_context API changes, some ip handling blocks were
ordered ipv4 first, ipv6 second. While it is the contrary everywhere
else. So reordering to get things consistent.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Not all #ifdef can be removed: those which have a dedicated attribute
in struct net_context.
- For CONFIG_NET_CONTEXT_CHECK: switching the NET_ASSERT_INFO to
NET_DBG (simpler to read and anyway an error code is returned)
Fixes#8725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Zephyr implementation of OpenThreads utilsFlashErasePage platform
function did not disable flash protection before calling `flash_erase`
function. This resulted in an error instead of actual flash erase on
platforms that properly implement flash write protection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This make use of NET_IF_NO_AUTO_START flag so Bluetooth interfaces are
not automatically enabled after initialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Implement OpenThreads frame pending bit management on top of the Zephyrs
radio driver API. This allows for proper Sleepy End Devices handling
from the parent side.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The pkt variable cannot be NULL at this point so the check for
nullness is not needed.
Coverity-CID: 198002
Fixes#15777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
If ethernet controller has VLAN tag strip flag enabled
(ETHERNET_HW_VLAN_TAG_STRIP), L2 etherent will not read tag from
the Rx etherent header. Instead it will fetch VLAN tag from
net packet metadata.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow for including arbitrary data in net_icmpv4_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow accessing already parsed information from the ICMP header
that callbacks might be interested in.
This makes the callback signature and behaviour match that of
the ICMPv6 implementation.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
We need to re-initialize the trickle->timer delayed work to use
trickle_timeout() if there are multiple triggerings.
Fixes#15606
Signed-off-by: ling wei <lingwei@cisco.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit prevents a situation when stored and possibly modified
commissioner dataset is overwritten with default configuration during
OpenThread initialization.
It introduces a new function, openthread_start, which verifies if the
dataset is already stored, and if not, depending on configuration,
preloads the default configuration or initiates the join procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In addition to checking that the ARP entry does not exist as the
implementation is done currently, also check if the ARP packet
is due to IPv4 link local address configuration. In both cases
use the provided IPv4 address instead of the one set for the
interface.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
IPv4 link local uses ARP to detect conflicting addresses. Properly
set the ethernet packet type to NET_ETH_PTYPE_ARP when probing
for address duplicates.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The source address in unicast DHCPv4 Request packets was found out
to be all zeros address 0.0.0.0. This address is only acceptable if
the destination is a multicast one, where the host in question is
acquiring a DHCP address lease. This is true for the DHCP Discover
and the initial DHCP Request message from the client towards the
server. As subsequent DHCP Request renewal messages are sent as
unicast to the server, the server will drop such packets.
Fix this issue by explicitely specifying what source IP address is
to be used, if none is specified, the all zeros address 0.0.0.0 is
used in multicast addresses. The source address in the other
unicast cases is identical to the 'ciaddr' in the DHCP message.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If for some reason the DNS resolver callback is not called properly
then make sure that semaphore will not block forever.
Fixes#15197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When VLAN is enabled, ethernet l2 layer fills ethernet header
but not added to the network buffer.
Fixes#15346
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This fixes an issue where if timestamp == service_due_timestamp,
we don't call the periodic service. Then the following call to
engine_next_service_timeout_ms() returns 0 because the service
is still due and lwm2m_engine_service() is called again.
This process repeats several times until the value of
k_uptime_get() changes and then the work is finally handled.
Previously, the resolution of k_uptime_get() was in ms. A recent
change to this API defaults Zephyr so that the resolution is
set via CONFIG_SYS_CLOCK_TICKS_PER_SEC (default 100).
This means the value of k_uptime_get() only changes every 10ms.
Reported-by: Github User pieterjanc
Signed-off-by: Michael Scott <mike@foundries.io>
"It's a Trap!" -- Admiral Ackbar
When moving to the BSD-socket APIs, the original thread running LwM2M
periodic services such as observes and lifetime updates, was replaced
with a re-occuring workqueue job. To save the overhead of creating a
new thread, I used the system workqueue for these jobs.
This was a mistake. If these jobs hit a semaphore or wait for some
reason, it cannot be prempted due to the priority of the system work
queue.
Let's instead add this service handling to the thread that we already
use for polling sockets. This also removes a configuration issue where
the system workqueue stack size needed to be increased. This can now
be adjusted via the LWM2M_ENGINE_STACK_SIZE knob.
Directly fixes semaphore usage in the socket-based DNS code.
This was introduced as a bugfix for non-responsive DNS server hanging
the Zephyr device forever. However, this probably fixes randomly
seeming hangs on the device.
Signed-off-by: Michael Scott <mike@foundries.io>
Increase the default mgmt event stack size from 512 to 768 because of
stack overflows.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
DNS is not part of L3, but as dhcpv4 or the net shell, it is a services
on top of the network stack. So let's gather all in a dedicated
function.
This also rework the order when starting the DNS service. There was an
issue for offload device: these would be fully initialized in
init_rx_queues() which was called after l3_init. l3_init had already
started dns: which would not be able to bind correctly, proving to be
fully dead afterwards. Instead, starting the dns at the very end
ensures that all is initialized properly from devices to stack.
Fixes#15124
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With or without options headers it has to work. Currently it was
setting always hop-by-hop next header which is obviously wrong but
worked on ipv6_fragment test since that one has only packets with
optional headers (hop-by-hop in that case has to be the first optional
header).
Fixes#14622
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the TCP segment is not sent properly by L2, then do not mark
it "not sent" in net_if.c:net_if_tx(). That "not sent" marking
confused TCP ref counting in tcp.c:tcp_retry_expired() and caused
the packet to be freed too early which then caused free net_buf
access issue during packet resend. This free memory access was
seen with zperf sample application.
From TCP point of view, the packet can be considered sent when
it is given to L2. The TCP timer will resend the packet if needed.
Fixes#15050
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 9cd547f53b.
The commit we are reverting, fixed originally the issue that was
seen with zperf. There we freed the net_pkt too early while it was
still waiting for a TCP ACK. The commit 9cd547f5 seemd to fix that
issue but it was causing issues in dump_http_server sample app which
then started to leak memory. No issues were seen with echo-server
with or without the commit 9cd547f5.
So the lessons learned here is that one needs to test with multiple
network sample apps like dump_http_server, echo_server and zperf
before considering TCP fixes valid, especially fixes that touch
ref counting issues.
Fixes#15031
The next commit will fix the zperf free memory access patch.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network packet ref count was not properly increased when
the TCP was retried. This meant that the second time the packet
was sent, the device driver managed to release the TCP frame even
if we had not got ACK to it.
Somewhat long debug log follows:
The net_pkt 0x08072d5c is created, we write 1K data into it, initial ref
count is 1.
net_pkt_write: pkt 0x08072d5c data 0x08075d40 length 1024
net_tcp_queue_data: Queue 0x08072d5c len 1024
net_tcp_trace: pkt 0x08072d5c src 5001 dst 5001
net_tcp_trace: seq 0x15d2aa09 (366127625) ack 0x7f67d918
net_tcp_trace: flags uAPrsf
net_tcp_trace: win 1280 chk 0x0bea
net_tcp_queue_pkt: pkt 0x08072d5c new ref 2 (net_tcp_queue_pkt:850)
At this point, the ref is 2. Then the packet is sent as you see below.
net_pkt_ref_debug: TX [13] pkt 0x08072d5c ref 2 net_tcp_queue_pkt():850
net_tcp_send_data: Sending pkt 0x08072d5c (1084 bytes)
net_pkt_unref_debug: TX [13] pkt 0x08072d5c ref 1 (ethernet_send():597)
Ref is still correct, packet is still alive. We have not received ACK,
so the packet is resent.
tcp_retry_expired: ref pkt 0x08072d5c new ref 2 (tcp_retry_expired:233)
net_pkt_ref_debug: TX [10] pkt 0x08072d5c ref 2 tcp_retry_expired():233
net_pkt_unref_debug: TX [10] pkt 0x08072d5c ref 1 ... (net_if_tx():173)
net_pkt_unref_debug: TX [10] pkt 0x08072d5c ref 0 ... (net_if_tx():173)
Reference count is now wrong, it should have been 1. This is because we
did not increase the ref count when packet was placed first time into
sent list in tcp.c:tcp_retry_expired().
The fix is quite simple as you can see from this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes following issues.
* If IPv6 neighbor table is full, stack can not add any new
neighbors. So stale counter is introduced. Whenever neighbor
enters into STALE state, stale counter will be incremented
by one. When table is full and if stack wants to add new
neighbor, oldest neighbor in STALE state will be removed
and new neighbor will be added.
* When neighbor is in PROBE state and when it exceeds max
number of PROBEs, only neighbor with router is removed.
As per RFC 4861 Appendix C, entry can be discarded. Now
neighbor will be removed from the table.
* Reachability timer has an issue. e.g. if a first entry timer
is 10 seconds, after 3 seconds, a new entry added with
only 3 seconds. But current implementation does not check
whether remaining time of current left over timeout is more
than new entry timeout or not. In this example, when new entry
timeout is 3 seconds, left over timeout from first etnry is
still 7 seconds. If k_delayed_work_remaining_get() returns
some value then new entry time out was not considered.
Which is bad. It fixed now.
* nbr_free is used sometimes to remove the neighbor. Which does
not remove route if that particulat neighbor is route to some
other neighbor. net_ipv6_nbr_rm() should be used in such places.
* Trivial changes which does not affect functionality.
Fixes#14063
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fix regression and allow incoming packet when source and
destination port numbers are the same.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of Ethernet for instance, the MTU is larger than the minimal
IPv6 MTU, so it is not required to fragment a packet that fits in
Ethernet MTU.
Fixes#14659
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is invalid to try to bit shift the same amount of bits as
what is the number of bits in the left expression’s type.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "is this packet for us?" filter in net_ipv4_input() has a minor
logic error which fails to discard many packets which are.. not for us.
Fixes: #14647
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The context_alloc_pkt() might run out of memory, and if that
happens we must not try to set the context pointer in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are reverting the changes in commit
55b3f05932 given build errors are seen
when fcntl.h is included, as it declares fcntl() as a non-static
function. The same function cannot be declared as both static and
non-static.
Instead, we avoid redefining fcntl() in lib/os/fdtable.c specifically
for case of the SimpleLink family, til we have support for the new
socket_op_vtable.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Since the new packet flow came in, payload comes at the end so udp
length for instance is known only when we "finalize" the packet.
However such finalization was still under the condition of chksum
offload, like it used to be in the former flow (udp headers were
inserted). This is obviously wrong but that was not caught with
existing driver in master as none of these drivers offloading
chksum calculation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit fc27a81ed2 ("net: context: Select proper network interface
when binding") moved the bind_default() call to after the remote
address was set for the net_context.
This and a later net_pkt API refactor broke net_offload() handling
so that context->iface wasn't set and context->flags didn't have
NET_CONTEXT_REMOTE_ADDR_SET correctly.
Let's fix this by relocating the net_offload handling to after
these have happened.
Signed-off-by: Michael Scott <mike@foundries.io>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_offload API is left untouched, so it still takes a net_pkt as input
for the buffer. This is under-optimized since offload drivers will copy
the data from that net_pkt back into contiguous buffer again.
Let's tackle this issue another time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute, in case CONFIG_NET_STATISTICS is enabled, made sense
when L2's send() function did not return the length of the sent packet.
But now, it's a superflous optimization as is it used only to set the
stats on recv or send, where net_pkt_get_len() can be used directly.
This helps to save 2 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Seems like a useless attribute. Since net_context is not being used by
the user directly (socket is the unique interface now) and since no core
parts uses the token parameter of net_context API: let's remove the
attribute.
This helps to save 4 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That function was responsible for allocating new buffer element, but it
is now unused and can be removed safely. Buffer allocation is now done
via net_pkt_alloc_buffer().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for these anymore: all is dictated by the position of
the net_pkt's cursor now
- actual cursor position is like the former appdata attribute
- net_pkt_remaining_data() is like the former appdatalen attribute
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Former net_context_send/sendto and net_context_create_ipv4/ipv6 are now
unused and can be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next header might be something else (here NET_IPV6_NEXTHDR_HBHO)
but when finalizing it is mandatory to give the actual last header
protocol type. In this case IPPROTO_ICMPV6, so the checksum can be
computed properly then by net_icmpv6_finalize() called from
net_ipv6_finalize().
Fixes#14663
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the L2 layer might have modified the cursor, reset it here
before giving the packet to promiscuous mode API. This way
the application will get a fresh copy of the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP context is now created with refcount of 2, signifying that it's
jointly owned by an app and stack. Thus, net_context_put()
unconditionally calls net_context_unref() to decrement refcount on
app's behalf, and leaves stack's refcount to internal routines
which handle sending/receiving/timing out FINs, etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
TCP context is effectively owned by both application and the stack:
stack may detect that peer closed/aborted connection, but it must
not dispose of the context behind the application back. Likewise,
when application "closes" context, it's not disposed of immediately,
there's yet closing handshake for stack to perform.
This effectively means that TCP contexts have refcount of 2 when
they're created. Without this change, following situation is
possible: peer opens connection, an app get a context (or socket)
via accept, peer sends data, closes connection. An app still holds
a reference to connection, but stack may dispose of context, and
even reuse it for a new connection. Then application holds a reference
to either free, or completely different context.
This situation was very clearly and 100% reproducible when making
Zephyr port of open62541 library, which works in async manner using
select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To save binary size, currently just returns textual name of error
code, e.g. EAI_FAIL -> "EAI_FAIL". Based on real usecases, can be
replaced with user-friendly message later. (Current usecase is to
allow/help to elaborate sockets API by proof-of-concept porting
existing socket apps).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Normally, this bug wasn't apparent as the value is type-casted
to a float32/64 type. However, once we start persisting these
values they need the correct length.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's avoid future compile issues with this macro when passing
in a type-casted value that isn't surrounded by parenthesis.
Signed-off-by: Michael Scott <mike@foundries.io>
Occasionally we see a stack crash in LwM2M. This may have been
due to the swap from net_app APIs to socket-based APIs.
Let's raise the default stack by 1k.
Signed-off-by: Michael Scott <mike@foundries.io>
When a context is closed to a server, we should clean up any
existing observes along with it. Otherwise these will try to fire
afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
We are already in sm_do_registration(), there's no need to check
!sm_is_registered(). Either we are performing a full registration
or a registration update. In both cases, sm_send_registration()
is called.
Signed-off-by: Michael Scott <mike@foundries.io>
If an error is received during registration update, we need to reset
the status so that a full registration is performed. This was
incorrectly being set to ENGINE_REGISTRATION_SENT.
The correct status should be: ENGINE_DO_REGISTRATION
Signed-off-by: Michael Scott <mike@foundries.io>
send() returns -1 upon error and sets errno appropriately. Let's
not bother saving the return code and instead share errno back
to the user.
Signed-off-by: Michael Scott <mike@foundries.io>
The socket-can code expects to have "struct can_frame" from
application when it calls send(). We then have to convert to
"struct zcan_frame" as that is what the driver expects.
Same thing when receiving data. We just convert to
"struct can_frame" and pass that to application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Now that IPv4 options are handled, ICMPv4 echo reply must be created
taking into account that IPv4 header length can be variable. So instead
of cloning and rewriting (that would copy the useless options), let's
allocate and copy only the payload.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 header length might be bigger than struct net_ipv4_hdr if there are
options appended to it.
Fixes#11618
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 header might come with options, unlike IPv6, these are not
encapsulated in option header but are fully part of the IPv4 header.
Zephyr must handles these. Now silently ignoring their content and
setting the cursor to the payload properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is probably the only place where net_pkt_alloc_from_slab() is going
to be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant for very particular use case as only logging uses that.
Where it makes entirely sense for it to send the logs through its own
slab/pool in order to not drain the core slabs/pools.
So enabling the new API to manage that. That has to be used with
net_context for the buffer pool. So one has to first allocate the
net_pkt from external slab, set the context and then (and only then)
allocate buffer. Basically, only net_context will uses that scheme
anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Though core system is able to manage packet timestamping internaly (gptp
requires it for instance), it might be necessary to enable/disable
packet timestamping from net context directly.
Currently this will be only used by the tx timestamp test. So this
support is disabled by default. (And gptp does not require it anyway).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is required if traffic class is enabled, so allocated packets from
net_context do get the right priority set.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That can be useful on some tests which will not have any interface but
still allocate net_pkt. Also, one may allocate a packet with buffer not
knowing yet the interface it will be send through.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This reverts commit 8cb5d083cb53627964ed72fb9fa3fb7a5219739f.
This was breaking tests on master due to missing dependency that is
still being reviewed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is done to conform with how the rest of the socket APIs are
implemented during socket offload. Otherwise link error would
result due to the symbol being redefined in lib/os/fdtable.c.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
As per RFC2131 4.1.1 requires we wait a random period
between 1 and 10 seconds before sending the initial
discover. But tests can not wait that longer. So this
option helps test to configure the value to minimum.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We sometimes want to join a device to OpenThread mesh automatically.
This commit adds supports to do by Kconfig.
The default of CONFIG_OPENTHREAD_JOINER_PSKD is based on this page:
https://codelabs.developers.google.com/codelabs/openthread-hardware/
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
If we receive the ARP request, then check if the ARP cache
contains an entry for this IP address already. If it does,
then update the MAC address in the cache.
Fixes#10188
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These options are oftentimes used when implementing servers, and
thus required to port existing socket apps. These options are also
safe to just ignore, e.g. SO_REUSEADDR has effect only for repeated
recreation of server socket (not an expected usecase for a Zephyr
app), while TCP_NODELAY is effectively the default for Zephyr, as we
don't implement TCP buffering (aka Nagle algorithm).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Multiple flag bits were set so the ACK flag set was not checked
properly which meant that connection establishment was not
successfull.
Fixes#13943
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ipv6_handle_ext_hdr_options() can return negative value
but we stored it into unsigned variable and then checked < 0.
Coverity-CID: 190995
Fixes#13830
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LI bits checks is useless as the bitshifted value cannot be
larger than SNTP_LI_MAX (3).
Coverity-CID: 190924
Fixes#13888
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Found via Coverity CID 191001: Control flow issues (NO_EFFECT)
This less-than-zero comparison of an unsigned value is never true:
"put_char(out, '}') < 0U".
Let's fix this check to be less than 1 instead as it should have
been originally.
Signed-off-by: Michael Scott <mike@foundries.io>
To get u8_t value, just right shift the operands are enough.
Fixes#12298
Coverity-CID: 190635
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The net-shell was using wrong config options for statistics
support. Also net_stats.h had wrong config used for IPv6 MLD
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Poll descriptor was not incremented in poll update function in case it
was reported as not ready. In result, poll could end up processing the
same poll descriptor for every fd requested to monitor.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework detection of EOF on a socket, so that it can be detected in a
poll prepare that socket is in in a EOF state and poll can return
immediately.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unfortunately, most of the dns pack/unpack code is not factorized, and
mdns responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unfortunately, most of the dns pack/unpack code is not factorized, and
llmnr responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So instead of building the net_pkt by itself, dns will pass its message
buffer to net_context_sendto_new(), which in turn will build the net_pkt
relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since net_context_sendto_new() does not take a net_pkt anymore, the only
way to set net_pkt's ttl/hop_limit is to pass it through net_context.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
dns_write was in the middle of this, let's just move it to a more
relevant place so we logically have macros, then local variables then
functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some of dns_pack.c macros are also used in resolve.c, so let's just put
the macros in dns_pack.h
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Once the fraction value has been assigned a value, we can't move
the exponent any more.
Fixes erroneous values the binary32/64 formats.
Signed-off-by: Michael Scott <mike@foundries.io>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since we don't want to redo the complex calculation, let's reuse the
uncompress functions, adding a dry_run possibility to those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When DTLS client was added to `poll` before/during the handshake, it
could throw errors and in some circumstances (when polling thread was
cooperative and had higher or equal priority to the handshake thread)
could lead to a deadlock in the application.
Prevent that, by blocking on handshake semaphore instead of fifo. Poll
will start using fifo for data poll only after handshake is complete.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of simple bool value, use a semaphore to notify that TLS
handshake is complete. This way, we can monitor this value with k_poll.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Errno value is only significant when `recvfrom` function indicated an
error (by returning -1). We should not depend on it's value if no error
is notified.
As the return value of `recvfrom` is already checked, misused errno
verification can simply be removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It simplifies things again, as it does not need to create the net_pkt by
itself anymore.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When closing the socket, zsock_close_ctx() would call
net_context_accept() when the socket was in "LISTEN" state.
This would result in an error log message for "Identical
connection handler already found" because the connection
context was already created because the initial
zsock_listen_ctx() called net_context_accept() to set up
the socket at the beginning. This change adds a test to
check if the callback is NULL which indicates this
close state and avoids the error message.
Signed-off-by: david leach <david.leach@nxp.com>
The sending of the final FIN message was being put on the sent_list
to be handled by the retry logic and being sent directly. But in
the case of a socket that never had a connection, the logic after
the direct send would decrement the reference on the packet which
would cause the retry logic to eventually have a situation where
the pkt is on the sent_list queue but the buffer associated with
the packet is freed back to slab. The code would then get a null
pointer to the tcp header and would fault when setting the crc to
zero on frdm-k64f platform.
Fixes#13489, #13301
Signed-off-by: david leach <david.leach@nxp.com>
The TODO file contained some random nice to have features.
The file does not mention use cases for these and also currently
the new features are managed and discussed in github.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Maybe there is an easier way to fill in the buffer in one call from an
otMessage.
Switch "frag" keyword to "buf", as "frag" is now reserved for actual
packet fragmentation and not buffer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Possible null pointer dereference when looking up the nexthop
neighbor.
Coverity-CID: 190639
Fixes#12294
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ICMPv6 network packets are processed and consumed (if not dropped)
within `net_icmpv6_input` function. Therefore they shoud not be
passed to the `net_conn_input` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This function is the opposite of getaddrinfo(), i.e. converts
struct sockaddr into a textual address. Normally (or more
specifically, based on the flags) it would perform reverse DNS
lookup, but current implementation implements only subset of
functionality, by converting to numeric textual address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
`net_ipv6_finalize` expects packet cursor to be reinitialized in order
to finalize packet correctly. This commits adds missing cursor
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A debug message told "Set EOF flag on pkt %p", but actually printed
net_context instead of net_pkt.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Commit 44964c735e ("net/gptp: Switch GPTP to new net_pkt API") changed
the callback used for allocation (from net_pkt_get_reserve_tx to
net_pkt_alloc_with_buffer), but for compilation with
CONFIG_NET_DEBUG_NET_PKT_ALLOC enabled, both callbacks are used
(the first pointer was just overwritten, causing MPU FAULT).
This commit removes the extra callback and fixes the fault.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Per Coverity report, oma_tlv_put() does pointer arithmetic accessing
the data as an array of u8_t. In put_bool() we get a singleton
pointer from the evaluation of: "value != 0 ? 1 : 0" which is
passed to put_s8() which in turn passes it to oma_tlv_put().
To avoid misinterpretation, let's create a temporary s8_t variable
to pass into oma_tlv_put instead.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12312
Signed-off-by: Michael Scott <mike@foundries.io>
The option CONFIG_NET_SOCKETS_RAW name was changed to
CONFIG_NET_SOCKETS_PACKET but two checks using the old name
was left to net_context.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
shutdown() itself is described as just marking RX or TX path of a
socket as not available. For the first approximation, we implement
it just as a dummy function, to allow build existing POSIX
applications which use it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Zero is a special value in the binary32/64 format. It has all zero
bits (sign=0, exponent=0 and fraction=0).
Handle this special case explicitly instead of trying to encode
in binary format which results in an incorrect value of 0.5.
Signed-off-by: Michael Scott <mike@foundries.io>
net_context uses net_pkt_alloc_with_buffer(), which sets the family and
protocol (according to parameters) so no need to set the family again.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initial implementation of IPSO Timer object #3340
Based on: http://www.openmobilealliance.org/tech/profiles/lwm2m/3340.xml
"This IPSO object is used to time events and actions, using patterns
common to industrial timers. A POST to the trigger resource or On/Off
input state change starts the timing operation, and the timer
remaining time shows zero when the operation is complete. The
patterns supported are One-Shot (mode 1), On-Time or Interval
(mode 2), Time delay on pick-up or TDPU (tmode 3), and Time Delay
on Drop-Out or TDDO (mode 4). Mode 0 disables the timer, so the output
follows the input with no delay. A counter is provided to count
occurrences of the timer output changing from 0 to 1. Writing a value
of zero resets the counter. The Digital Input State resource reports
the state of the timer output."
NOTE: Only One-Shot Mode (mode 1) is implemented in this patch.
Signed-off-by: Michael Scott <mike@foundries.io>
During the initial work on LwM2M, the float32/64 code was
basically stubbed out. Float32 sent only whole values and
float64 was completely broken.
Let's clean up the OMA TLV formatting code by moving the float
processing code into a separate file: lwm2m_util.c.
Then using public definitions for binary32 and binary64, let's
fix the processing code to correctly fill the float32_value_t
and float64_value_t types.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that legacy net_pkt_pull function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for cloning, no need to
keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_clone_new() sets the same attributes of the original packet to
the cloned one.
Fixes#13147
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/TCP
headers.
Also, when reading the actual data, let's use net_pkt_read_new()
relevantly instead of going through the buffer by ourselves.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/UDP
headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will return the amount of data to be read from current cursor
position. This will prove to be useful to remove appdatalen attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless as the only function using it
(net_pkt_set_appdata_values) got removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's not call net_pkt_set_appdata_values() which will be more costly
since it will need to parse all over again the packet to grab the tcp
header. Instead, let's use the tcp header pointer we have already and
set the appdata attributes directly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though unused anywhere, this function seems to have some usage while
debugging.
Let's rename it to a more semantically relevant name.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It not used anymore. If one wants to do the same check, it will require
to place the net_pkt cursor at the relevant position and use
net_pkt_is_contiguous(pkt, sizeof(struct net_udp_hdr))
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless and can be replaced by net_udp_get_hdr() directly, in
the 2 unit tests it was used.
Removing as well the dbg function too_short_msg()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new API for these 2 functions. Note that in some places,
using these functions is under-optimized (like in llmnr-responder in
dns: it gets the ip/udp headers already from the recv callback. That
will need to be taken care of later).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_tcp_data was only used in tcp unit test and could be replaced by
local net_tcp_get_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_ipv6_finalize() can take care of this, if net_pkt's ipv6_next_hdr
attribute is set to the right one, as well as ipv6_ext_len one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Legacy net_pkt allocator was not setting default value for IPv6
next header. And new net_pkt allocator was not setting default value
for TX traffic class and virtual LAN tag.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now unused anywhere: former net_pkt_get_src/dst_addr where the
only one using it and that has been changed since.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For networking code, it does not make sense to have zero net_buf
or net_pkt instances. Make sure this is enforced by code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
pkt->buffer is represented by 1+ net_buf. If some are unused, this will
deallocates them.
This situation can happen on TCP where net_pkt allocator evaluates the
header size to its maximum size. Which space might not be (fully) used
in the end. On fixed data size buffer, this might end up by having last
buffer(s) not bein used. So better removing those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
UDP was the only one doing the right thing. Let's generalize it
relevantly.
Fixes#13211
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will take into account the family and the protocol, as well as
existing buffer occupation, to return the available buffer space that
can be used for payload.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If a socket is in EOF, it's readable (so client can read() it, get 0
in return, figure it's in EOF, and close it). Without this change, we
had peer-closed sockets leaked (ignore) by poll() and select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
DNS callback needs "struct shell *shell" data structure to pass as
a parameter to shell print. How it was achieved previously is that
it was packaged together with cosmetic "bool first" param into
"struct net_shell_user_data" on the stack, and passed to the
callback. The problem was that the original command handler then
returned, so the "struct net_shell_user_data" on the stack was
overwritten, and the callback crashed on accessing it.
An obvious solution was to make that structure static, but that would
leave to issues still, as turns out we allow system shell to be run
as more than one concurrent instances.
Next solution was to keep this structure on the stack, but block the
command handler until callback is finished. However, that hit a
deadlock due to not well thought out use of a mutex in the shell
printing routines.
The solution presented here is due to @nordic-krch, who noticed that
"bool first" param is indeed cosmetic and not really required. Then
we have only "struct shell *shell" to pass to the callback, and can
do that in callback's pointer param directly, ditching
"struct net_shell_user_data" which needs to be stored on the stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
