x19 is callee saved register. z_arch_el3_plat_init being a callee,
it should save it before using it. However, at this point, stack
has not been setup. So, let's just use x20 instead which is not
being used caller yet. This bug was causing VBAR_EL1 corruption,
but since [10:0] bits are reserved, bug was hidden.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add and mark PCIe highmem outbound memory as nGnRnE device memory
in Viper SoC MMU configuration.
Increase VA/PA bits to 36-bits to support the same.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add reset interrupt handlers for all three types of reset
interrupts that iProc PCIe EP can receive - namely PERST,
INB PERST and FLR.
Signed-off-by: Shivaraj Shetty <shivaraj.shetty@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
This commit fixes Cortex-M header inclusions from the deprecated paths.
The Cortex-M headers were relocated from `include/arch/arm/cortex_m` to
`include/arch/arm/aarch32/cortex_m` by the refactoring done in the
commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add initilizations for:
- Cortex-A72 L2 Controller configurations. This initialization to
be done when cluster is in quiscent state.
- 'ICC_SRE_EL3' init to allow GIC V3 ICC_SRE_ELx system interface.
This initialization can be done at 'EL3' only.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Add initial support for Broadcom Viper SoC.
It has ARM Cortex-M7 and Cortex-A72 cores.
Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
We don't need to define DT_NUM_IRQ_PRIO_BITS or DT_NUM_MPU_REGIONS in
dts_fixup.h files anymore, so we can remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
