michaelh/zephyr

Fork 0

Commit graph

Author	SHA1	Message	Date
Kumar Gala	a1b77fd589	zephyr: replace zephyr integer types with C99 types git grep -l 'u\(8\\|16\\|32\\|64\)_t' \| \ xargs sed -i "s/u\(8\\|16\\|32\\|64\)_t/uint\1_t/g" git grep -l 's\(8\\|16\\|32\\|64\)_t' \| \ xargs sed -i "s/s\(8\\|16\\|32\\|64\)_t/int\1_t/g" Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	2020-06-08 08:23:57 -05:00
Tobias Svehagen	7b5f6bc660	drivers: wifi: Add ESP8266 and ESP32 wifi modem driver This adds support for the Espressif ESP8266 and ESP32 devices to be used as peripherals on a UART. There are two main AT command versions that can be selected, 1.7 and 2.0. Since they behave a bit different it is important to select the one that matches the used in the firmware on your device. When downloading large amounts of data it is highly recommended to enable CONFIG_ESP_PASSIVE_TCP and flow control on the UART so that data is not lost due to UART speed or receive buffer size. Currently unsupported: - Changing UDP endpoint with a sendto() - Bind to a specific local port - Server socket operations, ie listen() and accept() Official AT firmware for ESP8266 and ESP32 can be found at: https://github.com/espressif/esp-at Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>	2020-03-21 19:08:02 +02:00

Author

SHA1

Message

Date

Kumar Gala

a1b77fd589

zephyr: replace zephyr integer types with C99 types

git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>

2020-06-08 08:23:57 -05:00

Tobias Svehagen

7b5f6bc660

drivers: wifi: Add ESP8266 and ESP32 wifi modem driver

This adds support for the Espressif ESP8266 and ESP32 devices to be used
as peripherals on a UART.

There are two main AT command versions that can be selected, 1.7 and
2.0. Since they behave a bit different it is important to select the
one that matches the used in the firmware on your device.

When downloading large amounts of data it is highly recommended to
enable CONFIG_ESP_PASSIVE_TCP and flow control on the UART so that
data is not lost due to UART speed or receive buffer size.

Currently unsupported:
- Changing UDP endpoint with a sendto()
- Bind to a specific local port
- Server socket operations, ie listen() and accept()

Official AT firmware for ESP8266 and ESP32 can be found at:
https://github.com/espressif/esp-at

Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>

2020-03-21 19:08:02 +02:00

2 commits