Introduce sx1276_configure_pin() helper macro, which hides lots of
boilerplate preprocessor and C code. Doing so allows to uncover
inconsistent gpio initialization flow and prevent such in future. Also
add error log whenever gpio_pin_configure() fails.
It seems like output of gpio_pin_configure() for several
gpios (antenna_enable, rfi_enable, rfo_enable) was assigned to variable,
but its values was never checked. Return value from gpio_pin_configure()
of tcxo_power gpio was even not catched. The only output gpio
configuration that was handled properly was actually reset gpio.
Fix that inconsistent behavior by always checking return value of
sx1276_configure_pin().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added initialization of ids fields in the log message in
z_log_msg_std_alloc(). If user space is enabled then msg_free()
function is reading log level and previously it may have been
uninitialized.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Clear negotiated options in protocol down handler. That way all
addresses are properly requested (by sending 0.0.0.0 in Configure-Req)
in the subsequent option negotiation phases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix flash operation timeout due to incorrect use of
secondary ticker to abort any radio in use. Ticker id 0
is reserved for split controller's pipeline preempt timeout.
Using the same ticker id caused the secondary ticker to
not be started if controller is using the same ticker id
for pipeline preempt timeout.
Fixes#26333.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Allow feed operations that would stall due to internal peripheral
delays to complete immediately with -EAGAIN indicating that the feed
did not occur as expected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Updating mock module version to >=4.0.1 as sanitycheck testsuite
might fail in some systems due to old version.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Poke-a-hole (pahole) is an object-file analysis tool to find the size of
the data structures, and the holes caused due to aligning the data
elements to the word-size of the CPU by the compiler.
http://git.kernel.org/cgit/devel/pahole/pahole.git
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The sys_kernel tests have some loops that work only with 1 CPU
being active. So limits the number of CPUs to 1 even when SMP
is enabled. This also allows qemu_x86_64 to run, so remove it
from the exclude list.
Fixes#26627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Suppress -Wchar-subscripts warnings when building with Newlib, by
casting isdigit() parameter to unsigned char.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
LPC55xxx SoCs don't allow reading erased areas, the flash memory
controller (FMC) will trigger an ECC error for that area. To prevent
reading unwritten areas the low level FMC command of margin checking is
used, this will fail if the area to be read is not correctly written
(margin_check) or area is erased (blank_check).
In the case of an erased page, we return dummy data so the application
can program that area.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
In case of dualcore, STM32H7, STM32W and STM32MP1,
protect concurrent register write access with HSEM.
Done for following drivers:
clock_control, counter, flash, gpio, interrupt_controller
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Sample tries to estimate maximum number of messages that can be
logged. It was using two system cycles and counting number of
messages logged in that window. It did not take into account the
fact that clock frequency may vary and logging speed also varies
(especially if LOG_IMMEDIATE is enabled). Presented results may
be faulty and misleading.
Fix is attempting to adjust window size to increase precision of
the measurement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add the coding guidelines agreed upon by the project TSC with a
description of the staged approach needed to implement them
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running CMake, then Python3 will be used.
This is detected through FindPython3, with a preference for using the
python or python3 in path, if any of those matches the required Python
minimal version in Zephyr.
It is also possible for users to specify a different Python, as example
by using:
`cmake -DPYTHON_PREFER=/usr/bin/python3.x`
However, when running `west` as native command, then west will be
invoked on linux based on the python defined in:
`west` launcher, which could be: `#!/usr/bin/python3.y`
Thus there could be mismatch in Pythons used for `west` and the python
used for other scripts.
This is even worse on windows, where a user might experience:
```
>.\opt\bin\Scripts\west.exe --version
Traceback (most recent call last):
File "C:\Python37\lib\runpy.py", line 193, in _run_module_as_main
"__main__", mod_spec)
...
File "C:\Python37\lib\socket.py", line 49, in <module>
import _socket
ImportError: Module use of python38.dll conflicts with this version of
Python.
```
when testing out a newer Python, but the python in path is still a 3.7.
By importing `west` into zephyr_module.py and by using, as example
`python -c "from west.util import west_topdir; print(topdir())"`
we ensure the same python is used in all python scripts.
Also it allows the user to control the python to use for west.
It also ensures that the west version being tested, is also the version
being used, where old code would test the version imported by python,
but using the west in path (which could be a different version)
If the west version installed in the current Python, and west invocation
is using a different Python interpreter, then an additional help text
is printed, to easier assist users with debugging.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. This pass DT information to driver instance to
ensure proper behavior.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
We only have one use of _binding_compat and it doesn't need self, so
just fold it into _init_compat2binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We deprecated a number of aspects of the DTS binding syntax in Zephyr
2.1. Remove the support for the deprecated syntax. Remove from docs
about the deprecated syntax as well.
Removed reference in release-notes-2.1.rst to legacy_binding_syntax
since that anchor doesn't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
During inspection of the workqueue tests, I find out testing gaps.
Decided to add new test cases that can improve Zephyr OS testing
quality.
Added new test cases:
1. test_work_item_supplied_with_func
In docs described that work item supplied with a handler function,
prove that it works.
2. test_process_work_items_fifo
Test that system process work items in first-in, first-out manner.
3. test_sched_delayed_work_item
Verify that delayed work item processed after specific period of time
stated by user.
4. test_workqueue_max_number
Test the limit of number of workqueues created
5. test_cancel_processed_work_item Created test to increase branch
coverage.
Modified existing test cases:
1. test_work_submit_handler updated Doxygen tag, added more detailed
description"
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Create syscalls to make possible using random APIs from user mode
threads. These APIs can have different implementations, like using
entropy driver or Xoroshiro128. Some of these implementations also have
some globals to preserve state between calls.
Make it run entire in user space would require user adding these globals
to their memeory domains and/or grant access to entropy device. Syscalls
simplify its usage.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add github worklow for sanitycheck tests to run sanitycheck
testsuite on any changes in sanitycheck, sanitylib or
scripts/tests/sanitycheck directory.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
According to our compliance checks, we have 'useless-suppression'
and 'unused-import' on our hands:
W0611: Unused CLoader imported from yaml as Loader
W0611: Unused Loader imported from yaml
I0021: Useless suppression of 'unsubscriptable-object'
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Since the i2c init structure is moved from config_info to the stack,
this change requires 12 bytes more stack during driver initialization.
This fixes#25255
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
() This is simply to clean up the code for cycles and timing
calculations as there are quite a bit of unnecessary AND
operations.
() This also moves the cycle calculation closer to the print
statement as a few calculations were done between grabbing
counter values.
() PRINT_STATS() now takes only two parameters as the third
one was always calling CYCLES_TO_NS(2nd) anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The on-board sensor has a enable pin that must be pulled
high in order to power the sensor.
Since no i2c sensor connected to ENV_I2C is supported by zephyr yet,
changed the pins of i2c1 to be connected to CCS811_I2C pins.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
wifi-reset-gpios flags were not respected so far. This means that
setting reset as active low (which is required in most cases for ESP
modules/chips) was done inside esp driver with inverted logic. Use dts
flags instead, so "active low" property is configured the same way as
for other drivers (i.e. in device-tree instead of driver).
This change also allows to configure reset as active high, in case where
ESP's nRST signal is somehow inverted on the board (behaving as RST
signal instead).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add template for hardware support to properly label those requests and
distinguish them from other feature requests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
