Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the shell commands related to Advertising Extensions
to call the LE Set Extended Advertising Data command
functional interface for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MCMUMGR file system management is discouraged in production, just
adding it to the recommendation list.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Nordic QSPI peripheral uses DMA transfers so data to write must be
located in SRAM. Add a Kconfig that enables copying data from NVMC to
a stack SRAM buffer so it can be written to flash.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
mcumgr and possibly mcuboot write single byte values to update the
state of objects. Rather than fail to do the write of values too
short for this peripheral detect the situation and write from a stack
buffer that meets the length criteria.
Signed-off-by: Sigvart Hovland <sigvart.m@gmail.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Currently user is forced to configure an array of 4 IO pins. This makes
no sense when there are only 2 IO pins connected on board.
Configure 3rd and 4th pin in internal structure as
NRF_QSPI_PIN_NOT_CONNECTED if only 2 were specified in device-tree.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit is a followup to PR #25808 which updates the tests to
ensure the REQUIRED keyword is also used for the ZephyrUnitest package.
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Convert the description comment at the top of the file to a
documentation string. That string then maybe viewed with the --help
argument. Also, rework a bit the documentation string.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
This commit introduces the possibility of adding dependencies between
Zephyr modules to ensure that a Zephyr module on which other modules
depends is processed first.
The dependency chain is ordered using a topological sort.
This allows to add dependencies to a zephyr/module.yml as:
build:
cmake: .
depends:
- fatfs
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This option controls whether additional BLE support is
enabled for the cc13xx_cc26xx platform in hal/ti and
subsys/bluetooth.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The cs-gpios pin on SPI controller is optional for SPI controllers that
can automatically control CS line.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Extends the fix in commit 2175675199 to
all other mcux serial drivers. They were incorrectly checking if the
transmit buffer was empty when they should have been checking if the
transmission is complete.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The `netif` capability is needed for certain samples to be built by the
CI for a target platform. As it was missing for nrf52840dk_nrf52840,
echo samples with OpenThread support were not being built and thus not
tested by the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The STM32L072CZ MCU has a built-in USB device controller which is
supported by Zephyr's USB STM32 driver. The b_l072z_lrwan1 board has a
micro-USB connector that is wired to the MCU via two solder bridges
(SB15 and SB16) that need to be closed to connect the data lines.
Update the board documentation to describe the solder bridges and
enable the USB controller in the device tree.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Update the STM32 HAL to include the stm32l0xx_ll_usb HAL in the
build. This enables USB device support on STM32L0 devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
* add the runner script for metaware debugger(mdb).
* mdb is required for SMP case
* mdb also can provides a GUI interface
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* current supported boards:
* emsk, iotdk, nsim, emsdp, hsdk.
* for the unsupported future boards, pls take a
reference of supported boards' board.cmake.
* mdb runner is required and the default runner for SMP
case, e.g., HSDK and nsim_hs_smp.
* other ARC boards can also choose to use mdb by
setting runner as mdb, e.g. west flash --runner mdb.
* with mdb runner, user can make a debug through mdb gui
* with arc_nsim or opencod runner (default runner), user
can make a debug through gdb cmdline.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Also, add prj.conf options to make the sample builds on more
platforms. Finally, update the sample source to print explicit
"Finished" message, to let user know that the processing is done.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit removes an occurence of `cmake` and instead uses the correct
form ${CMAKE_COMMAND}.
This fixes issues where CMake is invoked without being present in the
system PATH.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
LoRa radios supported by LoRaMAC-Node have a lot of common
functionality. Zephyr's LoRa implementation for the SX1276 uses
LoRaMAC-Nodes Radio HAL to implement API functionality like send and
recv. The exact same functionality will be used by the SX126x
driver. Facilitate sharing by moving that to a separate source file.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
The implementation of the board support routines is shared between all
LoRa drivers that use LoRaMAC-Node. Move them from the SX1276
implementation to a separate source file to facilitate reuse. Make
this source file conditional on CONFIG_HAS_SEMTECH_RADIO_DRIVERS since
it will be used by all LoRaMAC-Node-based drivers.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Provide devicetree configuration for UART2 on the mesh feather header.
The peripheral must be enabled in an overlay, optionally including a
provided overlay with the hardware flow control signals.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use "kLPUART_TransmissionCompleteFlag" instead of
"kLPUART_TxDataRegEmptyFlag" to check if the tx transmition is finished.
The "kLPUART_TxDataRegEmptyFlag" would give a wrong result
even if the transmition isn't over.
Signed-off-by: Andy Liu <andy@madmachine.io>
