Increased accepted difference between system clock and
k_busy_wait clock. Some platforms (e.g. Nordic SoC) are using
different clocks for system clock (low frequency) and k_busy_wait
(high frequency). If those clocks are driven from low accuracy
source like RC oscillator then difference may be significant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Most boards run with 10 kHz ticks producing a period of 5 ms for 50
tick interval used in the timer periodic test. On Nordic 50 ticks
corresponds to 1.5 ms which is too short to complete the TC_PRINT()
call within the handler, causing the periodic timer to starve the
osDelay that would turn off the timer.
Adjust the period to be at least 5 ms or 50 ticks to avoid this
problem while not breaking other platform with slower tick rates.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Mostly simple. Note that the CMSIS RTOS2 API specifies timeout values
in system ticks instead of milliseconds, so the conversions here are
able to elide a conversion that the original code had to do. That's a
good thing, but does mean that in practice runtime behavior will not
be 1:1 identical.
Also note that the switch away from legacy timeouts involved a change
to 64 bit timeouts by default, which pushed
tests/portability/cmsis_rtos_v2 over the limit on qemu_xtensa.
Unfortunately CMSIS stacks have a fixed limit we can't increase, so I
turned off 64 bit timeouts (CMSIS apps won't need them by definition
anyway -- their API is 32 bit).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit changes the behaviour of the CMSIS-RTOS periodic timers to
have an initial timeout equal to the periodic timeout instead of
executing the callback function directly when calling the
osTimerStart(...); function.
This behavioural change is according to the CMSIS-RTOS specification.
Signed-off-by: Måns Ansgariusson <Mans.Ansgariusson@AssaAbloy.com>
This commit modifies the struct array initialisation expression using
the "universal initialiser" to a struct single element initialisation
expression in order to prevent old GCC versions from erroneously
reporting the "missing braces around initializer" warning.
This is an infamous bug in old GCC versions; since there is no side
effect of using this alternate initialisation expression and it does
not violate the C99 standard, this problem should be addressed in the
code for the sake of portability.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
just to keep same class of tests under the same umbrella, otherwise
those tests do not belong in the top level tests/ directory.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
just to keep same class of tests under the same umbrella, otherwise
those tests do not belong in the top level tests/ directory.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
