Fix segmentation fault detected by BabbleSim test due to
incorrect number of tickers being allocated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid ticker from null pointer dereferencing when storing
operation callback functions to be called during collision
resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan set allocation using BT_CTLR_SCAN_SET instead of
an incorrect duplicate BT_CTLR_SCAN_MAX.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Integrate the generated extended adv report PDU list into
HCI layer to generate the HCI LE Extended Advertising Report
event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change the implementation of extended scan PDU rx list to use
the extra pointer as the next field in the linked list node.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing Auxiliary PDU when primary PDU is calculating
the offset. Schedule the auxiliary PDU ticker before primary
PDU ticker is scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Low Latency Prepare Done that disables ULL_LOW
context executions inside a radio event, so that
ticker_job_idle_get is invoked from ULL_LOW instead of LLL
context so that its enqueued alongwith others scheduled
in ULL_LOW. This is avoid premature disable of ULL_LOW
context executions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Privacy is not supported in the build and Advertising
Extensions is enabled, HCI LE Enhanced Connection Complete
event was missing. This is fixed now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect adv_addr type in auxiliary PDU when address
is removed from primary and added to auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to calculate the window widening for
the reception of auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to avoid a crash due to missing aux_ptr in current
primary PDU constructed by LE Set Extended Advertising
Parameter Set, while aux_ptr was populated by LE Set
Extended Advertising Data Set in the latest double buffered
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle updates to adv mode and event
properties of an already created advertising set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix collision resolution to consider single-shot ticker,
current single-shot with ticks_slot as older that a next
periodic or single-shot ticker with ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker to correctly generate the operation callback if
single-shot ticker fails to be scheduled and does not
expire.
As the collision resolution is deferred to the worker, if
a single-shot ticker is cancelled, then appropriately call
the operation callback with failure status. This is allow
the user to take necessary actions, like release resources
allocated that need to be release on the failure to schedule
the single-shot ticker expiry.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the definition of PKT_US into pdu.h so that it can be used
by Advertising Extensions implementations too.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove us_radio_rdy field in the footer structure as its always
a constant value which can be obtained using a functional
interface to HAL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy advertising started using Extended Advertising
sets to use the set advertising random address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of phy struct member for scan set that is
not being enabled by use of LE Extended Scan Parameter Set
command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow use of HCI LE Set Random Address cmd when advertising
is enabled using Extended Advertising commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix, use phy variable instead of type to determine if
scanning on Coded PHY is to be enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to generate LE Extended Advertising
Report for received legacy PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of scanner state which could cause a
spurious SCAN_RSP packet without a prior SCAN_REQ being sent
to be reported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to support setting of legacy
Advertising Data and Scan Response Data using Extended
Advertising Data set functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Differentiate call to ll_adv_params_set, whether used by
legacy LE Set Advertising Parameters or LE Set Extended
Advertising Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable Advertising Extensions features in the controller
when enabled in the Host in combined host+controller based
applications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of periodic advertiser's LLL to
correctly handle event counter values when latencies
introduced due to sync events cancelled by active events
operating in unreserved time space.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of advertising extensions and
periodic advertising do that platforms with not support in
their LLL can be built without advertising extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of piggy back implementation.
This code should be deleted once periodic advertising
implementation is complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the shell commands related to Advertising Extensions
to call the LE Set Extended Advertising Data command
functional interface for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Port advanced scheduling implementation from legacy
controller.
This implementation schedules
- non-overlapping scan window when there are simulataneous
central connections active
- central connection establishment with similar connection
intervals be placed in a non-overlapping group, temporally
- connection parameter request with calculated window offset
hints to have non-overlapping BLE radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_l2cap_le_conn_rsp struct in l2cap_internal.h has not been
declared __packed. This can cause alignment problems on some
platforms if the struct is placed on an unaligned address.
A __packed declaration solves this issue by forcing the compiler to
use store instructions that do not required alignment.
Signed-off-by: Jim Luther <jilu@oticon.com>
Implemented an intermediate decrypt buffer to cover the CCM
overrun under CRC error conditions. The workaround is
applicable to nRF52832 SoC only, which is missing the
MAXPACKETSIZE register in the NRF_CCM peripheral.
Fixes#21107 for nRF52832 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds propagation of error returns from the model init callbacks in
Access, and removing any other checks for successful init in the
foundation models.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing assignment of NRF_CCM->MAXPACKETSIZE register
for PDU sizes smaller than 251 bytes. If there is CRC errors
causing PDU length fields to be higher than configured PDU
buffer sizes in the controller, without the MAXPACKETSIZE
register set to correct PDU size, CCM module could overrun
the PDU buffer and cause memory corruption. This fix is
applicable for all nRF52 Series SoCs except nRF52832 SoC.
Fixes#21107.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After removal of legacy controller ll_adv_aux.h does not exist anymore.
This is fixed in this PR by including ull_adv_aux.h instead.
The error only shows up when Advertisement Extensions are enabled
in the LL (CONFIG_BT_CTLR_ADV_EXT=y)
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
CC: mesh/access.c
mesh/access.c: In function 'model_has_dst':
mesh/access.c:483:10:
warning: returning 'u16_t *' {aka 'short unsigned int *'} from
a function with return type '_Bool8' {aka 'unsigned char'} makes
integer from pointer without a cast [-Wint-conversion]
483 | return bt_mesh_model_find_group(&mod, dst);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
The existing feature exchange procedure does not give the proper
response as specified in the BT core spec 5.0.
The old behaviour is that the feature-response returns the logical and
of the features for both peers.
The behaviour implemented here is that the feature-response returns the
featureset of the peer, except for octet 0 which is the logical and of
the supported features.
Tested by using the bt shell, and having different featuresets
on the 2 peers.
This fixes#25483
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commits fixes the loading of bt/cf settings into memory. Only data
was loaded and not the address.
Signed-off-by: François Delawarde <fnde@demant.com>
build breakage if SMP is disabled
In function `bt_unpair':
bluetooth/host/hci_core.c:2640: undefined reference to `bt_foreach_bond'
Signed-off-by: chao an <anchao@xiaomi.com>
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increases the transport segmentented tx seg_o counter to 6 bits to avoid
overflow when sending 32 segments. The check in the send loop would
previously never be false, which causes segments to repeat
unnecessarily.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fixes bug where the transport segmented tx would decrement the attempt
counter every time it ran out of buffers. If transport ran out of
buffers 4 times before the sending could complete, the transfer would
end prematurely.
Moves the attempt decrement to only execute when all segments have been
sent.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
Fixes#24014.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If LE Read PHY fails the code was still trying to parse the buffer as a
valid response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix extended advertiser not using correct set random address command
to set private (NRPA) address when privacy feature has been disabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Service Changed configuration stored in flash not deleted in flash
when calling bt_gatt_clear from bt_unpair.
When clearing the check for "is bonded" should not be made. If the
bond information is already removed this check will fail.
When clearing the check for "modified" should not be made, clearing
is in itself a modification, and should always be made.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
get_phy is referenced by BT_EXT_ADV only when BT_OBSERVER is also
selected. Avoid defined-but-not-used warnings in that situation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds support for bluetooth in nRF52820 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
When using extended advertising the connection can be established on
different PHY. In order to have an updated value of the current PHY
we need to read the PHY of the connection in the connection complete
event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig option so that the application can disable automatic
initiation of the data length procedure. This is symmetric with the
PHY auto initiation kconfig option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor setting the maximum data length parameters supported on in
auto data length procedure. This makes setting the data length of the
connection a re-usable function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With BT_CTLR_USER_TICKER_ID_RANGE it is possible for vendors to add a
number of ticker nodes for proprietary purposes. The feature depends on
BT_CTLR_USER_EXT.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The numbers should have been the sum of HCI commands count and ACL TX
buffers but instead the buffer size was used which makes the pool holds
substatially more buffer than necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add control over the use name option to advertise shell parameters as
an optional argument.
The argument count for extended advertise parameters had not been
updated for the maximum directed advertise parameter count.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implement the BT_LE_ADV_OPT_USE_NAME when using bt_le_ext_adv_* APIs
to start the advertiser.
When starting an extended connectable advertiser the name must be
included in the advertising data, since scan response data is
not allowed in this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting state flags in bt_le_adv_start_ext since they are set
by le_ext_adv_param_set, except for BT_ADV_PERSIST flag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the BT_LE_CONN_OPT_2M option and update documentation.
This was a misunderstand about the init PHY HCI parameter.
The init PHY in the extended connection create command does not
determine which PHYs are accepted as the initial PHY of the
connection. This is instead determined by the secondary PHY of the
extended advertiser.
The init PHY parameter only specifies which conn parameters are
provided, and since we only provide one conn parameter this option
has no effect.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The last parameter to hci_cmd_done() is expected to be a valid net_buf
since the function immediately tries to dereference it. Fix this by
passing the appropriate buffer reference to the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a new flag to track if the L2CAP channel is pending waiting
for encryption to be changed to resume connecting.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for ATT_MULTIPLE_HANDLE_VALUE_NTF,
ATT_READ_MULTIPLE_VARIABLE_REQ and ATT_READ_MULTIPLE_VARIABLE_RSP.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for EATT bearer which was introduced in 5.2, they work
as extra channels to have GATT traffic, at the moment it is completely
transparent to application when they are in use since the allocation
happens automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the definitions for Enhanced ATT along with new PDUs and UUIDs
introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to indicate when the stack has released all
references to a given channel so the owner free up any resources
associated with that.
This is requires since EATT channels cannot rely on the destroy callback
as it does not use a fixed channel like ATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This leaves only channels on the dynamic range to be offloaded to the
system queue so ATT and EATT handling are handling in the same context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the initial implementation of ECRED mode which can connect up
to 5 channels simultaneously and is required by EATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces new Enhanced Credit Based Flow Control PDUs and related
definitions which were introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The bluetooth subsystem is now fully compatible with the new timeout
API, so remove the selection of the legacy API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth host to using k_timeout_struct for the timeout values.
This is mostly replacing s32_t with k_timeout_t.
In l2cap the handling of no timeout in send channel request was removed
since the timeout is both documented as minimum of 1 second and never
given any no timeout value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the RPA addresses in the enhanced connection complete debug
log. This makes it easier to debug privacy failures.
Use a new debug statement so that the debug print will work correctly
when log_strdup does not copy the string.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix local RPA field for the legacy controller. This failed without
compilation errors because of blind pointer cast between two
structs of similar definition.
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue for extended advertising beacon. Adv pool was
mistakenly put under BT_OBSERVER define.
Both observer and broadcaster use the bt_lookup_id_addr. SMP cannot
be enabled without connections, so for broadcaster and observer there
will not be a lookup.
Fix compilation warning for extended scanner-only build.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to the BT Core spec. The local RPA field in the enhanced
connection complete event should be set if the own-address type was
set to 0x02/0x03 and the controller generated an RPA using a non-zero
IRK, otherwise the controller should return all zeroes.
In the case where we generate the RPA in the host instead we need to
handle set the on-air RPA address based on the random address set by
the host.
If this is not handled then pairing will fail because the on-air
addresses are used as input to the pairing procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove handling of extended advertising from connection complete
event. If extended advertising has been enabled and is supported by
the controller then enhanced connection complete must be supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>