Defined struct in node rx for passing event parameters of
Advertising Set Terminated Event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of Advertising Set Terminated Event on
duration sans use of additional variable in advertising
set context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds CONFIG_BT_CONN_DISABLE_SECURITY which can be used to disable
security checks for incoming requests enabling to test accessing GATT
attributes and L2CAP channels that would otherwise require
encryption/authentication in order to be accessed.
It depends on BT_TESTING to indicate to the users that this is a
testing feature which shall not be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should be possible to identify whether advertising set uses legacy
or extended advertising to avoid performing operations that are not
supported on either of them.
For example, scannable advertising can have advertising data set only
if legacy PDUs are used.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix a crash in the persistent advertising handling.
This occurs because the callstack of the RX thread overflowed
due to an infinite recursion between bt_conn_unref and
bt_le_adv_resume.
This happens when starting a new advertiser is denied by the
controller, then the conn object reserved will be released again
and the host will attempt to resume advertising in the bt_conn_unerf
at the end of bt_le_adv_resume.
This situation can happen if the host supports more connections
than the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Follow Bluetooth specification recommendation of setting the output
of the DH_Key field in the LE Generate DHKey Complete event when the
public key is invalid.
If the Remote_P-256_Public_Key parameter of the HCI_LE_Generate_DHKey
command (see Section 7.8.37) was invalid (see [Vol 3] Part H, Section
2.3.5.6.1), then all octets of the DH_Key event parameter should be
set to 0xFF.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Updated implementation to have consistent initialization of
ret_cb use when passing it to ticker function calls.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove cmd_ull_reset command, as this would put the host out
of sync. Also, this command is seldom used/required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
By splitting it out to a separate file, it will become easier to
separate generic and non-generic controller features.
This commit only contains the simple extraction.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fixed memory corruption when using uninitialised previous
PDU to populate current PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Resolves a corner case where the segmented sending would be rescheduled
before the segments were done sending. This would happen if the
processing of each segment took longer than the retry delay. The
consequence of this was that some segments were resent multiple times at
the cost of other segments, occasionally causing a loss of transfers.
Rearranges, realigns and documents seg_tx structure bitfields in
transport.c. Removes bitwidth of counter fields, and collecting all flag
fields into one byte.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Enforce support for Read RSSI command if BT_CONN and BT_HCI_RAW are
selected. According to the Bluetooth specification, support for the
Read RSSI command is mandatory if the Connection State is
supported. BT_HCI_RAW indicates that the controller is an
independently qualifiable module and not part of a combined
host/controller build. This change avoids a configuration that cannot
be possibly qualified.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Change fixes storing subscriptions in settings. CCC write can interrupt
the ccc_delayed_store. Without the change, new CCC was not stored in
non-volatile memory and the work that stored CCC was not resubmitted.
That resulted in lost subscription after reboot.
Fixes: #26862
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Refactor implementation to perform enable and started state
updates at consistent places in code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add bond_deleted callback so that the application can keep track
of when bond information is deleted in the stack.
Bond information can be deleted by the application through bt_unpair
or automatically by the stack in some cases, e.g when
CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled and the oldest bond
is overwritten.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add advertising option for undirected one-time advertising, and
directed advertising using identity, and peer direct is RPA option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow calling bt_le_adv_start with no connection object available
when not the option BT_LE_ADV_OPT_ONE_TIME has been set. In this
case the advertiser will be restarted once there is a connectable
advertiser object available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added implementation to acquire and initialize auxiliary
channel instance on use of periodic advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When CONFIG_BT_GATT_NOTIFY_MULTIPLE is selected and the remote has
enabled support for using its procedure data can sometimes not fit
into the buffer since the multiple variant has a bigger header, so
instead of failing immediatelly this attempts to send the data using
the legacy PDU instead so those using bt_gatt_get_mtu - 3 can still be
sent.
Fixes#26106
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable Advertising Extensions by default if supported by the controller.
That is, do not enable it by default for BT_LL_SW_SPLIT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Change sets default value of Kconfig option BT_CTLR_LLCP_CONN to
BT_MAX_CONN. The default value should properly handle the worst case.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Fix missing recalculation of skip value of the ticker being
inserted into ordered list, when it collides and is being
attempted to be inserted at next periodic interval.
This fix is for ticker compatibility mode which is used as
default for nRF51 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds idle wait callback to proxy by counting the number of pending
notifications.
Ensures that all connected nodes have received messages before resetting
the mesh stack.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix flash operation timeout due to incorrect use of
secondary ticker to abort any radio in use. Ticker id 0
is reserved for split controller's pipeline preempt timeout.
Using the same ticker id caused the secondary ticker to
not be started if controller is using the same ticker id
for pipeline preempt timeout.
Fixes#26333.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reverse the order of these checks because invalid PDU type will
never be expected. If PDU type is invalid we should respond with
error 0x0002 - Invalid format.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
