Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Need to set device busy when enter into transceive function
in SPI DW driver.
In current SPI DW driver the transceive function don't set busy state,
but that is important for PM busy state.
This will lead to unexpected behaviors when system calls this
function and enter into idle state.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Instance 2 & 3 for some reason never transitioned CONFIG_SPI_*_IRQ_* to
DT prefix. Fix that since those Kconfig symbols will never exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Makes the designware spi driver consistent with other spi drivers by
selecting HAS_DTS_SPI in the driver. This required adding spi nodes and
dts fixups to several arc and x86 socs, as well as enabling those nodes
in associated boards.
Also refactors the driver to use the base address, interrupt number, and
interrupt priority from dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is a rare but valid case when you request the controller to send
dummy bytes on your behalf (it saves memory as you don't need to provide
a valid buffer, just NULL and the numbers of dummy bytes as length).
Without it, user code can get stuck into interrupt loop.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to data sheet of dw_spi, ser reg is used to
select spi device/slave.
one bit in ser maps to one spi device/slave, i.e..
cs 0 ---> bit 0
cs 1 ---> bit 1
cs 2 ---> bit 2
the original code has a bug. the config->slave cannot
directly be written into ser. It should be mapped to
the correct bits through 1 << config->slave.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Logical or is unsufficent for setting up new tmod: it's required to
remove previous one first. Indeed, 0 as tmod is valid (tx-rx mode), but
previous tmod could be 10 or 01, so a logical or will keep the previous
tmod leading to a bogus transaction.
Fixing also a rebase issue visible when debug mode is enabled. Slave
callback is a left over from a test on spi slave.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It involves a minor change on which register is configured.
Most of the change is with threshold handling.
Handling the Kconfig based supported mode per-port.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for RX only, computing the NDF will be used for EEPROM mode.
Only a way to determine EEPROM mode is missing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using CONFIG_POLL, which is not directly related to SPI and
is a kernel option, let's have SPI_ASYNC instead. When enabled, it will
select POLL automatically.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.
Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the content of this struct will not be modified by drivers, it's
better to pass it as constant. Also, if someday struct device can be
made contant too, this change will make spi ready for registering the
spi_config into ROM directly.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current buffers might be configured to skip data, thus only len will be
set, buf will be NULL. Buffer should be used if only len is > 0 and
buffer is valid as well.
tx/rx are "on" if len is > 0
tx/rx buf should be touched if only len is > 0 _and_ buf != NULL.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removing internal boolean in order to use the proper error code hold in
spi_context which was relevantly added in commit 6c717095b8.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous approach allowed only single word update for single
function call. Updating context in ISR was inefficient for
controllers supporting automatic multiple data packets transaction.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
It is incorrect to call spi_context_release() on a
spi_dw_data object's ctx field before data->ctx->config is first
set in spi_dw_configure(). This is because spi_context_release()
reads ctx->config->operation. In particular, during spi_dw_init(),
calling spi_context_release() reads the uninitialized memory in
spi->ctx->config->operation.
Call spi_context_unlock_unconditionally() instead to properly increase
the semaphore count.
Without this patch, the first call to spi_transceive() can block
forever depending on the value of the uninitialized memory holding
spi->ctx->config->operation.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Instead of NULL terminated buffer arrays, let's add a parameter for each
that tells the number of spi_buf in it.
It adds a little bit more complexity in driver's side (spi_context.h)
but not on user side (bufer one has to take care of providing the NULL
pointer at the end of the array, now he requires to give the count).
This will saves a significant amount of bytes in more complex setup than
the current dumb spi driver sample.
Fix and Use size_t everywhere (spi_context.h was using u32_t).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI_HOLD_ON_CS can be used to ask the SPI device to keep CS on, after
the transaction. And this undefinitely, until another config is used.
This will inhibate the gpio cs delay, if any. This might be useful when
doing consecutive calls on one slave without releasing the CS.
SPI_LOCK_ON is to be used with caution as it will keep the SPI device
locked for the current config being used after each transaction. This
can be necessary if one needs to do consecutive calls on a slave without
any olher caller to interfere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All is done through the generic spi_context driver's API as it will be
generic to all SPI drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a struct k_poll_signal parameter to driver's API unique
exposed function.
If not NULL, the call will be handled as asynchronous and will
return right after the transaction has started, on the contrary
of current logic where is waits for the transaction to finish
(= synchronous).
In order to save stack, let's move the device pointer to struct
spi_config. So the call is still at a maximum of 4 parameters.
Adapting spi_dw.c and spi driver sample to the change so it still
builts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All SPI drivers have this same way to handle synchronous call, thus
let's generalize it in struct spi_context, with a relevant API and apply
the change into SPI DW driver.
spi_context API will prove to be useful once asynchronous call will be
handled as well, through the same completion functions used now only for
synchronous call. It will be transparent for the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's improve common SPI driver context by adding a lock and generic
function to get/release it.
It's statically initialized to save a bit of ROM.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
