Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After sending the MQTT disconnect message, no response is expected,
therefore it makes little sense to delay the socket closure.
So far it was expected to call `mqtt_input` function after calling
`mqtt_disconnect` in order to close the socket, which is
counter-intuitive. Simplify this, by closing the socket rightaway
in the `mqtt_disconnect` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move LVGL sample from samples/gui/lvgl to samples/display/lvgl to have
a unified location for display related samples.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
The path to include/drivers should not be in the compiler include path
list, only include/. In order to make this possible, always explictly
refer to hci_driver.h via the drivers/bluetooth/ path and not only
bluetooth/.
Fixes#21974.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove ST7789V display sample as there is a unified display sample
in samples/drivers/display.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Remove ILI9340 display sample as there is a unified display sample
in samples/drivers/display.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Using --runtime-artifact-cleanup, the script will now remove all
artifacts of passing tests. This is useful for running sanitycheck on
systems with little disk space.
Fixes#21922
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add device tree nodes for the internal temperature sensor in the NXP
Kinetis K6x SoC series.
A temperature sensor node is added for each ADC in the SoC to allow
the user to choose which ADC instance to use for the sensor readings.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Enable the bandgap buffer on the NXP Kinetis K6x SoC series Power
Management Controller (PMC) if the internal temperature sensor is in
use.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add device tree nodes for the internal temperature sensor in the NXP
Kinetis KE1xF SoC series.
A temperature sensor node is added for each ADC in the SoC to allow
the user to choose which ADC instance to use for the sensor readings.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add sensor driver for the internal temperature sensor present in the
NXP Kinetis SoC series.
The driver allows reading the die temperature and the voltage of the
external voltage reference used for calculating the temperature.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add device tree binding for the internal temperature sensor found on
the NXP Kinetis SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added dts additions for stm32 nucleo f767zi board, also added
and modified soc addtions for thet board.
Updated dts reference file name.
Updated yaml to take out adc for now.
Signed-off-by: Roland Ma <rolandma@yahoo.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments to promptless symbols have no effect. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
From looking at
http://www.mouser.com
/catalog/specsheets/CircuitCO_595-MINNOWMAX-DUAL%20Data%20Sheet.pdf
, this board uses an Intel Atom E3815 or an Intel Atom E3825 CPU.
Both of those CPUs are listed as vulnerable to all three variants of
Meltdown and Spectre in
https://www.techarp.com/guides/complete-meltdown-spectre-cpu-list/6/.
All the X86_NO_SPECTRE_V* symbols default to n (and it seems nothing
turns them on at the moment), so just remove the assignment, which will
be a no-op.
Also remove the comment re. Spectre V4, as it seems this board is
vulnerable to more than that, though I could've missed something.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for `CAP_NO_IV_PREFIX` in mbedTLS_shim and advertise this as
one of its capabilities. When this flag is active, the IV passed is
preserved to allow applications to reuse the IV buffer.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Zephyr crypto API currently does not allow IV to be treated as separate
entity. This is mostly due to fact that underlying libraries expect the
IV to be prefixed to the cipher/plain text for performance reasons. But
there are cases where the IV is derived from other sources and not
directly transmitted to the other end. In such cases, it must be treated
as a first class citizen.
This patch adds a new capability flag `CAP_NO_IV_PREFIX` to the crypto
API that allows operations without prefixing the IV to the cipher/plain
text. When `CAP_NO_IV_PREFIX` is active (and supported), the IV passed
to cipher_*_op() must not be modified.
As a side effect, the length of the cipher/plain texts are equal;
allowing for in-place encryption/decryption.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
out_dev(), etc., as a name is a holdover from before commit 73ac1466fb
("scripts: edtlib: Call nodes "nodes" instead of "devices""). It's
confusing for the same reasons as mentioned in that commit.
Renamings:
- dev_ident() -> node_ident()
- out_dev() -> out_node()
- out_dev_s() -> out_node_s()
- dev_aliases() -> node_aliases()
- dev_path_aliases() -> node_path_aliases()
- dev_instance_aliases() -> node_instance_aliases()
Also clean up comments to talk about nodes instead of devices where it
makes sense.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT_CONSOLE depends on CONSOLE, but SEGGER_SYSTEMVIEW and
SHELL_BACKEND_RTT select RTT_CONSOLE without also selecting CONSOLE.
This leads to a build failure in drivers/console/rtt_console.c (compiled
if RTT_CONSOLE is enabled) unless CONSOLE is enabled some other way.
Symbols like CONFIG_RTT_RETRY_DELAY_MS won't be defined, because they
depend on CONSOLE.
Came up in https://github.com/zephyrproject-rtos/zephyr/pull/21860. This
fix was verified there.
(Would be nice to get rid of some 'select's in the console subsystem at
some point. This is a quick fix.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Encoding of values with use of base64 has been marked as deprecated and
will be removed in future releases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This guarantees muscle memory will work over multiple runs when the
same boards are connected. (The "nrfjprog --help" output for --ids
does not guarantee an order.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Right now, the nrfjprog runner will prompt the user for which board to
use if there are multiple possibilities and the --snr command line was
not given to specify one ahead of time.
Tweak this so it only happens if standard input is connected to a
terminal. This should avoid stalling the process on board farms when
this runner is used in automation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The create() classmethod should not be doing any I/O -- its only job
is to create the ZephyrBinaryRunner instance. It's currently trying to
figure out what the serial number of the board is, though. Let's defer
that work to do_run(), so it gets handled by run_common's exception
handler.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Catch RuntimeError when calling runner.run() and print a message
instead of dumping stack unless in verbose mode.
This improves the command line interface when runners raise exceptions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Following update of STM32Cube packages for series F0/L0/F3,
a new file ll_usb.h is now available for these series.
As a consequence, specific hanlding is no more requested for this
series is stm32 usb_device driver.
Fixes#21962
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Flashing board nucleo_f207zg requires additional instructions
to be provided to openocd in order to enable flashing without holding
the reset button.
Update nucleo_f207zg openocd config to provide requested instructions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
SHT3XD_TRIGGER is already being selected by
SHT3XD_TRIGGER_GLOBAL_THREAD, which is enabled in the same configuration
file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
'build_only' directive may not be justified here and
prevent to see issue when running the test.
Similarly to non tickless version exclude qemu_x86_coverage
and qemu_cortex_m0 platforms.
It was actually tested failed on qemu_cortex_m0, no error
reported on qemu_x86_coverage, but removed to be safe on that side
as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We need to include soc.h in nrf5340_cpunet_reset.c, to include
the nRF5340 device headers. Fixes a compilation error when we
build with CONFIG_ARM_MPU=n.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Invalid channel should be filtered in intmux isr, please refer to
page 1243~1244 of chapter 36 INTMUX of RV32M1 RM.
Note: Unlike the NVIC, the INTMUX does not latch pending source
interrupts. This means that the INTMUX output channel ISRs must
check for and handle a 0 value of the CHn_VEC register to account
for spurious interrupts.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Bluetooth sample with controller crypto, requires sys_rand32_get that
used to be linked with Tinycrypt. The selection, within Kconfig of
Tinycrypt, that has been enabling compilation of the symbol has
been removed and thus preventing controller crypto to link.
This commit moves the selection to BT_CTLR_CRYPTO.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.
Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Nrfx_uarte uses a hardware timer/counter to count received bytes.
Keeping this timer enabled increases power consumption for some SoCs.
This change disables the timer when an inactive power state is set.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
The `zephyr_get_xxx` API for option fetching
enables prefix stripping. For some reason
the main API docs named it 'SKIP_PREFIX' instead.
Signed-off-by: Timor Gruber <timor.gruber@gmail.com>
Under race conditions it is possible that there is no call
to k_sem_give to the waiting k_sem_take in the ull_disable
function.
ull_disable function checks for reference count before
using a mayfly to schedule lll_disable, which in turn
would close requested currently active role event leading
to done event being propogated to ULL. Done event would
then call the set disabled_cb callback when the reference
count is zero, giving the semaphore to the waiting
k_sem_give in the ull_disable.
Under race conditions if the reference count reached zero
after the reference count check and before the disabled_cb
was assigned in the ull_disable function, then there are
chances that a k_sem_give is not called while ull_disable
proceeds to waiting using k_sem_take.
Fixes#21586.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add reference to wpanusb and wpan_serial examples. This links user with
some IEEE 802.15.4 applications.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
