The death of a network context was sort of a mess. There was one
function, net_context_put(), which was used both by the user as a way
to "close" the connection and by the internals to delete it and to
"clean up" a TCP connection at the end of its life.
This has led to repeated gotchas where contexts die before you are
ready for them (one example: when a user callback decides the
transation is complete and calls net_context_put() underneath the
receive callback for the EOF, which then returns and tries to inspect
the now-freed memory inside the TCP internals). I've now stepped into
this mess four times now, and it's time to fix the architecture:
Swap the solitary put() call for a more conventional reference
counting implementation. The put() call now is a pure user API (and
maybe should be renamed "close" or "shutdown"). For compatibility,
it still calls unref() where appropriate (i.e. when the context can be
synchronously deleted) and the FIN processing will still do an unref()
when the FIN packets have been both transmitted and acked. The
context will start with a refcount of 1, and all TCP callbacks made on
it will increment the refcount around the callback to prevent
premature deletion.
Note that this gives the user a "destroy" mechanism for an in-progress
connection that doesn't require a network round trip. That might be
useful in some circumstances.
Change-Id: I44cb355e42941605913b2f84eb14d4eb3c134570
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It will setup IPv4/IPv6 addresses. Telnet is ran in the background,
along with net and kernel shell modules.
See the README.rst for more information how to start and use this
sample.
Change-Id: I3e935014c79b534aab43a6fa8256792b23abb38e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow build-testing zoap-server with support for the CC2520 radio.
Change-Id: I986afd7b15208d477bd79f42a52dd45b217214cb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
In case the user wants to use BOARD make variable to conveniently use
another board with this sample.
Change-Id: I6dd0656da223218d116dd498c1336c890563b212
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The old default 2 is too low especially if TCP is enabled.
So in order not to confuse the application developer,
increase the default number of network contexts to 6.
Change-Id: I263bb4b6f31354a11d921d94aa97214abd85ae24
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_addr_ntop() will convert IPv4|6 address to string form.
Renamed existing net_sprint_ip_addr_buf() to net_addr_ntop()
and adjusted parameters as per API.
Jira: ZEP-1638
Change-Id: Ia497be6bf876ca63b120529acbadcfd9162a96e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This make sure the link-local address of the destination is added to the
nbr cache as that is accessed when calling net_ipv6_prepare_for_send,
this is needed when following RFC 7668 since link-local addresses are
never registered using nbr discovery.
Change-Id: I2bc578d33d1061726d0cbf46e4464df74d79e992
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
in net_print_statistics for RPL we had:
GET_STAT(rpl.dio..sent)
This wouldn't work or compile, so drop a dot.
Change-Id: Idd6b4dfd5fcae3b90bc977fe3ed301cd813ca87c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This configuration file allows using the device 802.15.4 radio for
IPv6 networks.
Change-Id: I9b3ee9a64acb71e97e4e8f7aae3e619196ad0462
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If the user supplied connect callback uses too much time, then
it is possible that the connect_wait semaphore will timeout
even if the TCP connection was established correctly. This issue
can be avoided if connect_cb is called after we have released
the connect_wait semaphore.
Change-Id: I175e80f2ad48de657d0d99a44340c5ee1a17364c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It was in the static initializers, but was missing from the object
runtime init functions.
Change-Id: I10d519760eabdbe640a19cc5cfa9241c1356b070
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will allow users to install a way of finding out what the event and
the objects are used for without looking at the object itself, or to
tag a bunch of objects that belong together.
The runtime init function _does not_ take a tag so that there is no
runtime hit if not needed. The static initializer macro _does_ take the
tag, so that it does not have to be initialized at runtime if needed,
and thus avoids a runtime hit.
Change-Id: I89a36c6f969ff952f9d1673b1bb5136e407535c6
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This tests access to standard libraries. Adapted
to use ZTEST.
Jira: ZEP-932
Change-Id: I3564bfa61221b2456323c1018402237b6129b5ca
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some header files were defining MON and causing a conflict, so call this
something unique and avoid future conflicts.
Change-Id: If9d2553a20b3afae50a09f4c0e10733ee1cdd58d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the microkernel version of the FPU sharing test from legacy
modified to use unified APIs directly.
Jira: ZEP-932
Change-Id: I133a1466ea75201a97c2f8b83c3586fea0a19447
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When CONFIG_FP_SHARING is enabled without CONFIG_LEGACY
thread.c was referencing symbols like K_TASK_GROUP_FPU
which are defined in legacy.h
Change-Id: I4bb1723f91c3e3586c5d1bf05cf23a1c0d3d5aac
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Many users set USE_CCACHE=1 in their envionment. Sanitycheck was
disregarding that and placing USE_CCACHE=0 in the generated
Makefile unless --ccache was added to the command line every time
it was invoked.
Issue: ZEP-1663
Change-Id: Id3c1379f5039d4d2f4a3ae01d2ec8d0dd216f523
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These interrupts are for ISRs that need the lowest possible latency.
They do not take parameters and are installed directly in the interrupt
vector table.
Issue: ZEP-1038
Change-Id: I7583e9191dd32d9253ad933181d2103a6e191dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With the recently added k_poll feature, k_fifo_put_list was forgotten
about. Add the necessary code to wake up a k_poll call when
k_fifo_put_list is called.
Change-Id: Ib9baef5ee2bd00620e2eea5afdd81accc4518bd5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Document building now copies files from the boards/ and samples/
folders into the doc/ folder, but didn't delete these copies after
the build. Remove the copied folders after the docs are built and
include removing these folders in the make clean actions.
Jira: ZEP-1650
Change-Id: Id5f04a53f0d865bd4211138a35852ac8ab115239
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
k_poll() is similar to the POSIX poll() API in spirit in that it allows
a single thread to monitor multiple events without actively polling
them, but rather pending for one or more to become ready. Such events
can be a direct event, or kernel objects (currently only semaphores and
fifos).
When a kernel object being polled on is ready, it is not "given" to the
poller: the poller must then acquire it via the regular API for the
object (e.g. k_sem_take()). Only one thread can poll on a particular
object at one time. These restrictions mean that k_poll() is most
effective when a single thread monitors multiple events that are not
subject for contention. For example, being the sole reader on multiple
fifos, or the only thread being signalled by multiple semaphores, or a
combination of both.
Change-Id: I7035a9baf4aa016fb87afc5f5c0f5f8cb216480f
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Dissociate wait queue initialization from doubly-linked lists if the
underlying implementation is to be abstracted.
Change-Id: Id7544c6ac506643437f9c4f0ae97e7eecab8d06d
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Allow peeking at the fifo to see if there is an element without
dequeuing it.
Change-Id: I99cbe4495c81f1d7b77ad6a37cef4ec8c24d48eb
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
These two docs have a long skinny list of items that displays
better as a multi-column list (using the hlist directive).
Change-Id: Ia1a1f8555bdefe0c9051944d9946299395258bfc
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Each GCC target backend is at liberty to define its own SIZE_TYPE. GCC
uses this for various purposes, not lease it drives the machinery that
spits out format specifier diagnostics when format specifiers are
applied to objects with inappropriate type. GCC exposes the current
definition of SIZE_TYPE via the preprocessor symbol __SIZE_TYPE__.
The GCC build processes also generates various standard library header
files that directyle expose stanard types in a form consistent with
the current configuration of GCC. Conventionally standard library
build processes (for glibc and newlib) pick up the header files
generated by the GCC build.
In the minimal libc we have no such build process, we don't pick up
the header files that the GCC build process generated. Instead we
define our own alternative header files and align them with GCC
manually.
The current definition of ssize_t in minimal libc is out of step with
GCC which means that any use of the %z[du] format modifier will issue
a diagnostic.
We replace the open coded architecture detection in minimal libc and
use GCCs __SIZE_TYPE__ directly.
Change-Id: I63b5e17bee4f4ab83d49e492e58efd3bafe76807
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
tests: fs: Fix printf warning when using newlib
Current code uses %ld format specifier to print data of
type ssize_t. This causes type warnings when built with
newlib. The correct format specifier to be used for
ssize_t is %zd.
Change-Id: I02a3c628e3d6e8a36a09cd694220406d8faf1730
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1492
Change-Id: If6acbaabf0857425684e0ab2d4db513e5bbc7b77
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This is a zero-copy networking implementation of Ethernet driver.
Limitations:
- one shot PHY setup, no support for PHY disconnect/reconnect
- no support for devices with DCache enabled due to missing
non-cacheable RAM regions in Zephyr.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1492
Change-Id: Ib944f91193efbd12c1142b0bcf1f635388bf1b87
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added basic USART driver for Atmel SAM MCU family. USART is a very
comprehensive module, currently only basic features sufficient to
support printf functionality are implemented by this driver.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-978
Change-Id: Ia9710e4069243fb6c30de45953dfc1fe1266b63a
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>