Move the use of tIFS software switching PPI index set up by
one position to make place for use of PA/LNA implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Earlier design captured AA twice in the first Rx in a slave
connection event and retained one of the capture until end
of event to calculate drift.
Design updated to use single capture of AA and save the
first AA capture in a slave connection event in RAM instead.
This frees up a PPI channel in the controller design.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Document internal the purposes of various Tx/Rx PDU end
capture setup.
Also, removed any redundant capture of packet end.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of radio_tmr_start to reduced duplicate
assignments common in if-then-else control path.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for USB 2.0 and NCM CDC protocol
Change-Id: Ib815b7d9d02d404b5dfbcc8aba1fcd7e6de71bd3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
mcuboot_constraints.h had FLASH information related to the SoC that
should be maintained as part of the SoC and not in the subsystem. Also
fixed Makefiles to check for IMG_UTIL Kconfig and not MCUBOOT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Similar addition was don previous for nRF52840.
Added flash-controller description and moved flash description to
it. Added property for description of
the flash alignment required by write operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Similar addition was don previous for nRF52840.
Added flash-controller description and moved flash description to
it. Added property for description of
the flash alignment required by write operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In a case gateway is not set drop packet early otherwise bogus
ARPs for 0.0.0.0 are sent.
...
[net/arp] [DBG] find_entry: (0xa8006720): dst 0.0.0.0
[net/arp] [DBG] find_entry: (0xa8006720): [0] iface 0xa800cd80 dst
0.0.0.0 ll 00:00:00:00:00:00 pending 0xa800a7c0
[net/arp] [DBG] find_entry: (0xa8006720): ARP already pending to
0.0.0.0 ll 00:00:00:00:00:00
[net/arp] [DBG] net_arp_prepare: (0xa8006720): Resending ARP
0xa800a380
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add information that IP addresses in prj_qemu_cortex_m3.conf file for
echo_client are set that qemu<->qemu communication could be tested.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
nrf SOCs use external timer for measuring benchmarking stats.
Earlier this timer is programmed in 24 bit mode, due to which
is is getting expired in some of benchmark stats like mutex
lock/unlock. So configuring to 32 bit mode to avoid overflow.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some of benchmark stats were not reported for nrf52/52 based SOCs.
This was because nrf based SOCs use external timer.
In timing info some of benchmark stats still use systick based APIs.
Due to which benchmarking number was not getting reported. So change
it to timer based for nrf.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
When TCP connection over IPv4 could not be established there was
an error about TCP connection over IPv6.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
fixed error introduced in application.rst (v1.8) along with a general
spelling check pass including consistent spelling of "runtime" and
hyphenated words with "pre-"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A quick look at "man syscall" shows that in Linux, all architectures
support at least 6 argument system calls, with a few supporting 7. We
can at least do 6 in Zephyr.
x86 port modified to use EBP register to carry the 6th system call
argument.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleanup I2C drivers to not use bitfield access for config information
and instead use accessor macros that use shifts & masks. This is
cleanup towards removing the bitfield access in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to clone just the net_pkt which does not have any
data fragments linked to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
While importing the nrf_power.h to use the nrf_power_resetreas_get()
function the missing header file error was presented.
Origin: Nordic SDK 12.2.0 (components/drivers_nrf/hal)
URL: http://developer.nordicsemi.com/nRF5_SDK/
License: 3-clause BSD
Maintained-by: External
Signed-off-by: Flavio Arieta Netto <flavio@exati.com.br>
Signed-off-by: flavio <flavio@exati.com.br>
With logging enabled, this leads to type mismatch warning, which is
promoted to error when building under CI.
Also, reomove extra "\n" from the logging messages.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add a simple test which generates a file that can be included
into a .c file. Then verify in zephyr that the file contains
the same bytes as the original file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is useful if there is a need to generate a file
that can be included into the application at build time.
The file can also be compressed automatically when embedding it.
Files to be generated are listed in
generate_inc_file
generate_inc_gz_file
variables.
How to use this commit in your application:
1. Add this to your application Makefile
SRC = $(ZEPHYR_BASE)/<your-app-dir>/src
include $(ZEPHYR_BASE)/scripts/Makefile.gen
2. Add needed binary/other embedded files into src/Makefile
to "generate_inc_file" or "generate_inc_gz_file" variables:
# List of files that are used to generate a file that can be
# included into .c file.
generate_inc_file += \
echo-apps-cert.der \
echo-apps-key.der \
file.bin
generate_inc_gz_file += \
index.html
include $(ZEPHYR_BASE)/scripts/Makefile.gen
3. In the application, do something with the embedded file
static const unsigned char inc_file[] = {
#include "file.bin.inc"
};
static const unsigned char gz_inc_file[] = {
#include "index.html.gz.inc"
};
The generated files in ${SRC}/*.inc are automatically removed
when you do "make pristine"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This file is no longer needed as IPSS service is already enabled with
CONFIG_NET_L2_BT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is useful to enable error/warning logging across the net
codebase (less useful for debug level logging, but that's true
for CONFIG_NET_LOG_GLOBAL already).
Implementation-wise, instead of keeping adding to long list of
"select"'s in CONFIG_NET_LOG_GLOBAL and thus introduce component
inter-dependencies, add "default y if NET_LOG_GLOBAL" to
individual components' logging options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
At the moment we print "Sending ARP packet" even if we found ARP entry
and send the packet directly.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the first part of a large refactoring of LwM2M library
message functions and will simplify observer handling later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
All throughout the LwM2M library we use sockaddr values which are
basically the same as the net_app_ctx's remote addr. There's no
reason to keep these extra sockaddr values around. The net_app
framework client won't accept incoming requests on sockaddr other
than the one we're connected to.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In preparation for the move to net_app APIs, we will need
to pass net_app_ctx structures around to the following
functions:
lwm2m_udp_sendto()
udp_request_handler()
Let's add the parameter as net_context for now so the
transition will be smoother later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows use to associate easily the replies / pending operations
with a specific network connection.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
