Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously, if passive close is peformed, the net context is released
after FIN is received and FIN,ACK is sent. The following last ack from
the peer will be treated as an improper packet, RST is sent to the peer.
This patch refines tcp_established() by centralizing the tcp state
transition and releases the net context only if NET_TCP_CLOSED is
reached.
Besides, the logic that releases the net pkt without appdata (i.e. ACK
or FIN) is moved from packet_received() to tcp_established(). This makes
packet_received() less dependent on the protocol and make the usage of
net pkt more clear in tcp_established().
Fixes: #4901
Signed-off-by: Aska Wu <aska.wu@linaro.org>
When testing memq implementation used by controller, a
missing check on NULL pointer return could lead to NULL
pointer deferencing.
Current implementation of controller and mayfly do not
by design lead to NULL pointer dereferencing, this fix
is only for correct-ness and complete-ness.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Sphinx/breathe doesn't support showing nested groups, so explicitly add
the nested groups in the API documentation (for Bluetooth Mesh).
Also, added an ignore pattern for a nested unnamed type known issue.
fixes: issue #5040
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Increase sleep time for main thread (1 sec to 1 minute) to keep SOC
in Low Power State for longer time. Currently nrf SOC is entering into
low power state and exiting immedately after 1 sec.
With this change SOC will wake stay in Low Power State till GPIO is
pressed or sleep time expired (whichever is earlier).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Update for LOW POWER state and SYSTEM OFF state for nrf52.
update for TICKLESS KERNEL support in xtensa_sys_timer
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add basic documentation about Ethernet over USB and describe
prj_netusb.conf configuration file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration, pinmux, dts and documentation for the STM32L476G
Discovery board based on the STM32L476VG SoC.
Signed-off-by: Arthur SFEZ <arthur.sfez@gmail.com>
Currently Zephyr is running from RAM, and the space where
instructions can be executed from is quite small.once Flash
cache is enabled in ESP32 port we can remove this check.
Signed-off-by: Nishikant Nayak <nishikantax.nayak@intel.com>
Implement API to validate user buffer. This API will iterate
all MPU regions to check if the given buffer is user accessible
or not. For #3832.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
The PREBUILT_HOST_TOOLS variable was used during the CMake migration
but is no longer documented or needed. As the docs demonstrate, adding
tools to path is an easy way to find prebuilt host tools.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Having two implementations of the same thing is bad,
especially when one can just call the other inline version.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As per https://tools.ietf.org/html/rfc7230#section-3.3.2:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Delete the native UART JTAG driver as we will be reusing
the Altera's HAL driver.
Add the shim driver support for Altera HAL's JTAG UART soft IP.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Delete the native timer soft IP driver as we will be reusing
the Altera's HAL drivers for most of the soft IP's.
Add shim driver support for Altera timer system clock soft IP.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the basic infrastructure like driver <-> IRQ mapping table
and ZEPHYR_RTOS compile time flag which are neccessary to make
use the HAL drivers from Zephyr shim drivers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the Altera HAL sources from Altera Quartus Lite SDK
to Zephyr OS under 'ext/hal/altera' folder.
Origin: Altera Quartus Prime Lite SDK
URL: http://dl.altera.com/?edition=lite
Version: v17.0
Purpose: Provides HAL support to Altera's soft IP's
Maintained-by: External
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
When resetting there is no point trying to start clearing the
Friendship since there will not be any security material left to send
out PDUs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The common interpretation (among other implementations) seems to be
that Model Publication for a given AppKey Index implies a binding for
that AppKey. This isn't currently explicitly stated in the spec, but
in order to improve interoperability go with this interpretation as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable for tracking that a buffer from the Friend Queue hasn't
been sent yet was not being properly set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If we cannot send a DHCP message, then unref the net_pkt
in order to avoid a buffer leak. Earlier we tried to
unref NULL net_pkt which is not correct.
Signed-off-by: june li <junelizh@foxmail.com>
patch removes the mem.h and marcos used in that file are
moved appropriate board files. As there are boards with
different flash configuration but of same soc, flash and
ram size are moved to dts file instead of dtsi
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a command for getting and setting the model publication. We also
have to adjust the app's configuration, since both the Model
Publication Set and Status messages are segmented messages, meaning we
need two TX and RX segment contexts.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The value 0xffff is reserved, so we can use that to indicate whether
there's a vendor model in question or not. Simplifies things over the
previously used separate boolean value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For an unknown reason, various samples in KBuild were including
Makefile.test, this had some desired benefits, one of which is that
the popular BOOT_BANNER appears. The CMake-equivalent of including
Makefile.test is setting the flag IS_TEST. This commit reverts the
behaviour of the samples back to how it was pre-cmake.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The Kbuild equivalent of IS_TEST was used for hello_world before, so
we revert back to the old behaviour. This resolves
https://github.com/zephyrproject-rtos/zephyr/issues/4904
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
CONFIG_NET_L2_BT_ZEP1656 should only be used with older Linux up to
4.11 which by now should have been updated in all distros.
For those sticking with older distros should select it manually as
it does breaks IID address it should never be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>