The arm qemu platform has limitiations as we get into more complicated
features like userspace support. Add one hardware platform to catch
issues in sanitycheck for development of such features.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A condition is added to the Kconfig file to disable config options which
will be supplied from the dts.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Commit 08de658eb ("kernel: mem_domain: Check for overlapping regions
when considering W^X") introduced some compile issues on various
platforms.
The k_mem_partition_attr_t member is attr not attrs. Also, fix an issue
where sane_partition_domain neesd a pointer to a parition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Include and describe all the highlights in the 1.11 release, listed in
the major features initial section and described in the different
subsections in more detail.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update the home page to add a choice for the 1.11 docs and update the
release notes page to add the 1.11 release notes link.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add support for building the WS2812 LED strip driver sample against
the new ws2812b_sw driver. Currently a configuration is only provided
for the BBC micro:bit board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This driver uses a bit-banging based technique of generating a signal
for the WS2812B LED strip. Since bit-banging is very timing sensitive,
where each CPU cycle counts, the driver uses inline assembly to
perform the most critical operataions. This initial version of the
driver only supports a Cortex-M0 implementation, and can e.g. be used
with the ZIP Halo LED strip for the BBC microbit:
https://www.kitronik.co.uk/5625-zip-halo-for-the-bbc-microbit.html
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We're missing a k_sem_give for contexts_lock in the
CONFIG_NET_OFFLOAD path of net_context_put().
This fixes a network hang which occurs after any http_close()
call when CONFIG_NET_OFFLOAD is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Reduce the code duplication in ext/hal/st/stm32cube/CMakeLists.txt by
using a foreach loop instead of copy-paste for each SoC.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This fixes intercompatibility issues with controllers supporting
privacy feature.
Core Spec requires to use network privacy mode as a default when
peer device provides its IRK during bonding when LL Privacy is used,
which is the case for Zephyr. We've seen devices including PTS
which exchanges it's IRK but is not aware about network privacy
mode. This results in Zephyr not able do be reconnect to such bonded
devices.
This workaround sets device privacy mode to be able to reconnect
to such devices.
Fixes#4989Fixes#5486
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The Linux Foundation has been assigned a Company Identifier, and with it
a means of identifying Zephyr over the air. Default to the LF Company
Identifier, which can be overridden by silicon vendors.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
It's added in subsys/net/lib/http/http_client.c:http_request():95
after adding the protocol header. If we add 2 CRLF it ends the
header block and causes an HTTP error.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In commit 9489fa54cc ("net: http: Fix http_prepare_and_send"),
the logic for when to call http_send_flush() was incorrect. This
is causing a call to http_send_flush() every time
http_prepare_and_send() is called.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In previous version of the HTTP API, commit 8ebaf29927 ("net: http:
dont timeout on HTTP requests w/o body") fixed handling of HTTP
responses without body content.
For the new API, let's add a specific fix for when PUT/POST requests
are responded to with just the status code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixed the controller implementation for the missing advDelay
for connectable directed advertising events used in a low
duty cycle mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add HCI error code definitions based on the Bluetooth 5.0 specification.
That allows for example that disconnection reasons can be checked
against the constants.
Signed-off-by: Johannes Hutter <johannes.5494@gmail.com>
This fixes a bug in the cdc_ecm Ethernet over USB driver. The ECM
spec (section 3.3.1) says that the end of an Ethernet frame is marked
using the USB short packet mechanisim, where the last packet is less
than the maximum packet size. If the Ethernet frame is a multiple of
the USB maximum packet size then a final zero length packet must be
sent.
Linux however sends a one byte packet (usbnet.c:1393) to work
around hardware issues with zero length packets.
The current Zephyr driver works most of the time except when you send
an Ethernet frame of the right length where the last byte is zero,
such as:
$ ping 192.0.2.1 -s 23 -p 0
Zephyr then drops the last byte, creating a short frame which gets
dropped higher up in the stack.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit fixes the crash of echo server from unsolicited RA with
reachable time set to 2147483648. The crash was in
net_if_ipv6_calc_reachable_time because such large value resulted in
modulus by zero due to integer overflow.
Fixes#6382
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Moving the ccache build script earlier in allows us to export ccache
to external projects. Using ccache with external projects, such as
OpenThread, can significantly speed up the build time.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>