Place audio buffers in LPSRAM using linker section attribute
for the 2-way audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the I2S audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the digital mic audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add dts fixup definitions for low power sram base address and size
- DT_LP_SRAM_BASE
- DT_LP_SRAM_SIZE
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
cmake has a number of issues dealing with symbolic links:
https://gitlab.kitware.com/cmake/cmake/issues/16228
One of them can cause cmake to rewrite the -S input from the user and
CMAKE_SOURCE_DIR to unexpectedly include symbolic links:
https://cmake.org/pipermail/cmake/2019-May/thread.html#69496
Catch this corner case and warn about subtle issues like breaking
-fmacro-prefix-map=${ZEPHYR_BASE}=
Sample warning message:
CMake Warning at ../../CMakeLists.txt:30 (message):
ZEPHYR_BASE doesn't match CMAKE_CURRENT_SOURCE_DIR
ZEPHYR_BASE = ~/zephyrproject/zephyr
PWD = ~/westsymlink/zephyr/samples/hello_world
CMAKE_CURRENT_SOURCE_DIR = ~/westsymlink/zephyr
You may be using a mix of symbolic links and real paths which causes
subtle and hard to debug CMake issues.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Save few RAM bytes by declaring exti_irq_table as const.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some code in stm32 exti driver was considering exti lines number
for which no IRQ_CONNECT was available. To be clear, this code
was not functional and since no one complained it was not used.
Besides, code to take into account these "high" irq lines was
complex hard to read and review.
Simplify state of things by removing completely this part of code.
It could be put back again piece by piece when required.
This change allows to get rid of EXTI_LINES definition.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Function stm32_exti_enable is complex and makes it hard to extend
to new stm32 series.
When MP1 support was added, table exti_irq_table was introduced
to simplify stm32_exti_enable function.
This change extends usage of this table to other series, without
adding or removing any functionality.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Minimum block size is 2x larger on 64-bit systems, so let's simply
double all size params. This won't change the validity of those tests
on 32-bit systems. Alignment tests are also adjusted for wider pointers.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
TI_HDC Driver now also supports waiting for conversion to finish instead
of waiting for GPIO interrupt.
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Although unlikely it is possible that a remote may attempt to send just
1 byte as the write request allows to do that:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F
page 2320:
'If the attribute value has a fixed length and the Attribute Value
parameter length is less than or equal to the length of the attribute
value, the octets of the attribute value parameter length shall be
written; all other octets in this attribute value shall be
unchanged.'
Fixes#16734
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can't possibly have worked since the initial merge of the board.
It looks like it was originally written as a port from a KBuild
Makefile fragment but never tested, and has only been touched by
tree-wide changes since then. Try to fix it.
I don't have this hardware, but it should work the same way as
96b_nitrogen if it truly supports pyocd.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Fix the tx_ack mfifo count to accomodate both data and
control PDUs being acknowledged.
With out this fix, pending maximum number of data plus
control PDUs in LLL on supervision timeout asserted due to
tx_ack mfifo overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the master clock drift.
Relates to #11764.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added an internal ull_update_mark function to detect race
conditions while stopping ticker instances during slave
drift, disconnection and connection update.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds counter driver based on RTCC module for SiLabs Gecko
SoCs.
Tested with SLWSTK6061A / BRD4250B wireless starter kit.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Enable generation of doxygen documentation for kernel APIs that are
behind Kconfig options and add a note about the option needed to enable
the APIs.
Enable both CONFIG_SCHED_CPU_MASK and CONFIG_SCHED_DEADLINE in doxygen
config file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the west flash/debug commands, if the user gives an invalid build
directory, they'll get a stack trace instead of a helpful error
message when the cache can't be built.
Fix that.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Doxygen comments can include doxygen-specific markup tags. If other
markup tags are used (e.g., restructuredText) we need to indicate that
in the doxygen comments (via @rststar/@endrststar tags).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add the possibility of configuring the build folder format in west's
configuration system.
The build.dir-fmt configuration option controls how west will create
build folders when not specified, the following parameters are currently
accepted:
- board: The board name
- source_dir: The relative path from CWD to the source directory
- app: The name of the source directory
If CWD is below source_dir in the directory hierarchy then source_dir is
set to an empty string.
This means that if one sets:
[build]
dir-fmt = build/{board}/{source_dir}
Then when building samples/hello_world from zephyr's root for the
reel_board the build folder will be:
./build/reel_board/samples/hello_world
but when building it from inside the samples/hello_world folder it will
instead be:
./build/reel_board
Fixes https://github.com/zephyrproject-rtos/west/issues/124
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
In preparation for upcoming changes to the way the default build folder
is defined, switch to using the common find_build_dir() function in the
runners.
This actually changes the behavior for the west build command slightly,
since the current working directory (cwd) will now be checked after the
default build folder ('build'). This brings it in line with what is
used for the runners.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move common properties like 'compatible', 'reg', 'reg-names',
'interrupts', 'interrupt-names', and 'label' into one common base.yaml
that all the other yaml's can inherit from. This removes both
duplication and inconsistent definition.
The device specific yamls just need to say if a property is 'required'
or not.
NOTE: due to some generation conflicts we did not covert
'soc-nv-flash.yaml' to use base.yaml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Due to driver refactoring there is no more match to *stm32f4*.
Also, it seems that @rsalveti and @idlethread are not more
actively contributing to zephyr, so this change should not be
a concern.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order ease readability of Kconfig.stm32 file, split series
specific PLL configuration options into series specifc Kconfig
files.
This being done, we have now a similar pattern for series specific
code and series specific Kconfig files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RCC device could be common to various STM32 series.
Until now, PLL handling code was set in series specific files,
even if it was driving the same device than another series.
Minimize code duplication by factorizing code between series
when possible.
With this change, some series get additional features by getting
access to code developed for other series.
Additionally, while renaming the files, remove the non informative
'x' to minimize file name length
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This trivial patch extends the PCIe shell to check for and report
on a device's ability to use MSI-X interrupt signaling.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
More clearly differentiate MVIC vs. APIC timer code, and use new APIC
accessors in include/drivers/loapic.h. Remove extraneous comments, and
other light cleanup work.
This driver is in need of a serious overhaul -- despite appearing to
have support for TICKLESS_KERNEL and DEVICE_POWER_MANAGEMENT, bitrot
has taken its toll and the driver will not build with these enabled.
These should be removed or made to work... but not in this patch.
Old x2APIC-related accessors in kernel_arch_func.h are eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
