The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Increase the length of the request buffer.
Current value is not enough for an average
device descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Mitigate the check of the request buffer length because
the host may not know the real length for some responds.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
this case isn't designed for SMP, setting CONFIG_MP_NUM_CPUS=1 to
run the full SMP kernel config, but with only one CPU available.
Fixes: #12478.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
The MSI PLL mode has been disabled but can be used since LSE is
populated on disco_l475_iot1 board. This is requested to enable
USB device controller support.
Fixes#18717
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
If a stack is declared with K_THREAD_STACK_EXTERN first, analyze array
in elf_helper.py will ignore this declaration which will be referenced
by the actual instances via the tag DW_AT_specification, so that this
stack can't be detected by the kernel object detection mechanism, and
this will cause userspace not work.
Fixes: #16760.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
As we have re-worked the test code, and the test-case can run
on Cortex-M platforms on any available and implemented NVIC
IRQ lines, we do not need to exclude these ARM boards anymore.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-works the test for the ARM architecture,
so that it can work with any available NVIC IRQ, not
bound to use the last 2 NVIC lines. It makes use of
the dynamic IRQ feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit makes it possible to infer Z_ARCH_EXCEPT()
calls in SVCs that escalate to HardFault due to being
invoked from priority level equal or higher to the
interrupt priority level of the SVC Handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
West v0.6.1 has been released. The main feature is that "west update"
now avoids communicating with the network by default when project
revisions have already been fetched.
This allows for offline operation and significantly speeds up the
command (it's 10 times faster on my machine and home network).
There are other miscellaneous changes as well; document them also.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The ARM embedded toolchain has 2 newlib based libc build variants, one
that utilizes the "nano" configuration which is more in line with the
Zephyr SDK. Make the "nano" cfg the default if newlib is enabled to
match closer how the Zephyr SDK behaves.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Error checking was missing following call to
counter_set_channel_alarm.
This was reported in coverity report 203523.
Fixes#18374
Additionally remove unneeded err initialization in main function
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Configure pins before enabling and after disabling UARTE through
power management functions.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
commit 780324b8ed ("cleanup: rename fiber/task -> thread")
seems to be done by a script and in that particular case turned
menaingful sentence into nonsense. Alas, threads might be in all
four states.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anas Nashif <anas.nashif@intel.com>
We manage IRQs in a quite a different way now since
commit f8d061faf7 ("arch: arc: add nested interrupt support")
so that comment not only makes no sense but also may fool a reader
as disabling of interrupts happens in the very beginning of
_rirq_exit() but not here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Current JSON formatting for float32/64 is broken in a similar way as
plain text. Let's use the newly fixed logic for plain text to
generate the float32/64 values in the JSON string.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
we should not rely on that eret has a copy of ilink in fast
irq handling. This will cause crash for hs cores.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For the old codes, if nest interrupts come out after _isr_wrapper
and before _check_nest_int_by_irq_act, then multi-bits in irq_act
will be set, this will result irq stack will not be switched in
correctly
As a fix, it's still need to use nest interrupt counter to do
interrupt stack switch as before
The difference is in the past exc_nest_count is used, but here
_kernel.nested/_kernel.cpus[cpu_id].nested is used.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* in arc secureshield interrupts can be configured
as secure or normal
* in sw design, high interrupt priorites are allocated to
secure world, low priorities are allocated to normal world.
* secure interrupt > secure thread > normal interrupt > normal
thead
So, here secure world/firmware only checks secure interrupt
priorities
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
it's not allowed to switch to thread preempted by exception as
its context is not saved.
So if a thread switch is required in exception handling, e.g.
kill a thread, the old thread cannot be switched back
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For arc processor equiped with secureshield, SEC_STAT.IRM
bit should be recorded, it determins which mode irq should
return
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
modernizr.min.js is causing unnecessary reloads of a page causing
flashing of the browser window during page load (most noticiable with
firefox). This empty script effectively wipes out the modernizr.min.js
unnecessarily loaded by the Sphinx rtd theme (see
https://github.com/readthedocs/sphinx_rtd_theme/issues/724)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
