Allow to flash either Cortex M4 or M7 with OpenOCD
(depending on which Board/Core has been compiled)
Command: west flash
Warning: Dependency with recent OpenOCD patch:
Windows: https://gnutoolchains.com/arm-eabi/openocd/
version 20200408
Linux : http://openocd.zylin.com/
SHA1: 0a804222da63c5f849efa23b019a59e2dea76842
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The Kconfig I2C_[0-9] sybmols don't have any meaning for the majority of
SoCs. The drivers doesn't utilize them and no sample or test code does
either so we can remove setting them in board Kconfig.defconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Define USB driver for base stm32wb device.
* Enable USB for the nucleo_wb55rg board.
* Properly initialize USB power + clock for the platform.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
Provide three basic examples to test the x-nucleo-iks02a1 shield:
- Test shield standard mode
Acquire sensor data from shield configured in mode 1.
- Test shield sensorhub mode
Acquire sensor data from shield configured in mode 2.
- Test on-shield microphone
Acquire microphone PDM audio and output it in 16-bit
PCM format to console.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
x-nucleo-iks02a1 shield is an arduino compatible companion board
which can be used on top of Nucleo standard boards for industrial
applications. It extends the Nucleo functionalities adding following
MEMS sensor support:
- ISM330DHCX 3-axis accelerometer and 3-axis gyroscope
- IIS2MDC 3-axis magnetometer
- IIS2DLPC 3-axis accelerometer
- IMP34DT05 digital microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enable I2S_STM32 in the soc common part, so it will no
longer be required in board default configuration.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use the endop bit in the status register (instead of using a k_sleep)
to wait until the current shub operation is completed.
Please note that the recent changes to k_sleep() API was also
breaking the compilation.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Since this is such a basic sample, it's worth nitpicking the wording a
bit:
- Add a link to the supported boards, since many first time users
will not know where it is and may start near here.
- Remove the single and multi threaded note. There's no information on
how to build it in either of these two modes or what the default is,
so it feels like a distraction for such a basic sample.
- Give a clue about how to build for another board.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The devicetree link is rendering as "Devicetree Guide" instead of
"devicetree". Fix that.
My guess is that most users won't care about the details of the
requirements, and rather just want to know if their board is supported
or not. So move the error you'll see on unsupported boards before the
details about how to add support (which involve a pretty significant
learning curve).
Also mention overlays as a way to get this working.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Strip out text that isn't needed to try to minimize the GSG's length.
Fix up some grammar nits.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the feature tracking page with a couple of new categories that
have been identified as missing during the Release Readiness meetings:
- Hardware support
- Meta
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add control over the use name option to advertise shell parameters as
an optional argument.
The argument count for extended advertise parameters had not been
updated for the maximum directed advertise parameter count.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implement the BT_LE_ADV_OPT_USE_NAME when using bt_le_ext_adv_* APIs
to start the advertiser.
When starting an extended connectable advertiser the name must be
included in the advertising data, since scan response data is
not allowed in this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting state flags in bt_le_adv_start_ext since they are set
by le_ext_adv_param_set, except for BT_ADV_PERSIST flag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
MACRO_MAP has the same functionality as FOR_EACH macro. Removed macro
implementation and replaced with FOR_EACH call.
Deprecated macro to avoid having two macros with the same
functionality.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In process of deprecating MACRO_MAP macro which has same functionality
as FOR_EACH macro, replaced MACRO_MAP with FOR_EACH.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated implementation of FOR_EACH and FOR_EACH_FIXED_ARG to use same
engine as FOR_EACH_IDX macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros which iterate over provided parameters and call specific
macro with this parameter, index and fixed argument
(FOR_EACH_IDX_FIXED_ARG).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
LoRa drivers no longer depend on CONFIG_COUNTER. Remove this
configuration option from the samples.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Rename a few cases of DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY that snuck
in after the initial global change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit reverts the device tree binding vendor prefix check regular
expression change that was introduced by the following commit:
5b10fac97e
The changed regular expression fails to detect the correctly specified
vendor prefixes in the `vendor-prefixes.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Restart scanning if connection creation fails; could happen
when devices with low RSSI are discovered but not available
thereafter to establish a connection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added central sample to read die temperature value from peripheral
device.
Signed-off-by: Charan Pudiyaneravana Venkatesh <charan.pv@sixoctets.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Integrated temperature sensor sample fetch and use of the value
in the GATT indications.
Signed-off-by: Charan Pudiyaneravana Venkatesh <charan.pv@sixoctets.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Mostly simple. Note that the CMSIS RTOS2 API specifies timeout values
in system ticks instead of milliseconds, so the conversions here are
able to elide a conversion that the original code had to do. That's a
good thing, but does mean that in practice runtime behavior will not
be 1:1 identical.
Also note that the switch away from legacy timeouts involved a change
to 64 bit timeouts by default, which pushed
tests/portability/cmsis_rtos_v2 over the limit on qemu_xtensa.
Unfortunately CMSIS stacks have a fixed limit we can't increase, so I
turned off 64 bit timeouts (CMSIS apps won't need them by definition
anyway -- their API is 32 bit).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was missing a prompt string, causing recent kconfig logic to
throw an error if an app tried to set it directly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
No complexity here. The CMSIS API was always in milliseconds, needs
nothing but a few wrapper macros for kernel timeout arguments.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This allows mass storage exposure of a littlefs file system,
specifically one on the SPI NOR flash of the nrf52840dk_nrf52840. In
combination with littlefs-fuse this allows a host system to examine
and change the local storage of a Zephyr application.
Note that it is critical that all parameters of the file system match
between what Zephyr is using and what littlefs-fuse is using.
Inconsistencies can produce confusing results where each system sees
different content. The README has been updated with a detailed
example.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop the old redefine-everything-in-a-special-conf approach and put
the customization appropriate for this board into the board directory
where it's handled automatically.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The API call to close the flash area was only invoked when the flash
area was erased. It should be closed in all paths.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash drivers may impose alignment requirements on the destination
buffers due to use of DMA transfers. In particular Nordic QSPI flash
API requires that addresses, sizes, and buffers all be 4-byte aligned.
Align the ready/copy buffer to satisfy this requirement.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash drivers may impose alignment requirements on the destination
buffers due to use of DMA transfers. In particular Nordic QSPI flash
API requires that addresses, sizes, and buffers all by 4-byte aligned.
Align the page buffer to satisfy this requirement.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This library supports stream writes to flash with
optinal progressive erase.
This module is a direct copy of the functionality found in
subsys/dfu/img_util/flash_img.c
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
