The stack buffer used to pad small reads must still be aligned to a
word address as the underlying driver uses DMA transfers with that
requirement. Don't assume the compiler will naturally align it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The check for small transfers inadvertently allowed a transfer of zero
bytes, which should be an error (invalid parameter).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The consequent and alternate expressions for COND_CODE_1 must be
enclosed in parentheses, like this:
COND_CODE_1(PREDICATE, (consequent), (alternate))
The parens are missing in exactly one place in the tree. Fix it.
Reported-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The possibility of passing K_FOREVER as the initial duration argument
to k_timer_start() wasn't being handled, with the result that the
computed value became an zero timeout (effecitvely treating it as
K_NO_WAIT and firing at the next tick).
This is obviously pathlogical, but it should still do what the code
says it should and wait forever.
Make k_timer_start(..., K_FOREVER, ...) a noop.
Fixes#25820
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Describe how an API can be deprecated, which is via the __deprecated
keyword or by introducing a legacy Kconfig option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The bt_l2cap_le_conn_rsp struct in l2cap_internal.h has not been
declared __packed. This can cause alignment problems on some
platforms if the struct is placed on an unaligned address.
A __packed declaration solves this issue by forcing the compiler to
use store instructions that do not required alignment.
Signed-off-by: Jim Luther <jilu@oticon.com>
Add DT_ macros for retrieving the value of the 'period' cell for PWM
controllers supporting this cell type.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Activation of the LPTIMER is valid for SLEEP MODE only
The choice of the lptim clock source is STM32_LPTIM_CLOCK
set the LSE in first position to have as default value
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds a new LPTIM binding for stm32 soc,
based on the timer binding. This will makes a specific filter
on dt_compat_enabled("stm32,lptim")
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is defining the SYS_CLOCK_TICKS_PER_SEC default value
depending on the LPTIM CLOCK frequency in case of LPTIMER,
to get a TICK value as a divider of the LPTIM clock source.
It gives a better result in formulas when converting
ticks to count unit.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
based on PR#25412
Some kernel tests use `CONFIG_TICKLESS_KERNEL=n` with
`CONFIG_SYS_CLOCK_TICKS_PER_SEC=1` to detect when a test runs longer
than 1 second. These tests break if a tick is announced every time a
timeout occurs. Only announce if the measured duration since the last
tick is at least the duration of a tick.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
set the min and max values of the given ticks from 0
to LPTIM_TIMEBASE which is the full register value
In case the timeout is FOREVER, then lptimer is stopped
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The current value of the counter must not be added to the accumulator.
It will be added when calling z_timer_cycle_get_32.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
When the tickless kernel isn't used, we don't want to wait for ARROK.
This wait can be endless.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
Implemented an intermediate decrypt buffer to cover the CCM
overrun under CRC error conditions. The workaround is
applicable to nRF52832 SoC only, which is missing the
MAXPACKETSIZE register in the NRF_CCM peripheral.
Fixes#21107 for nRF52832 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes: #25656
The commit a8e90cbfb3 improved handling of
shields. Unfortunately it pops items from the SHIELD variable which
works well if SHIELD is a CMake ;-separated list, but if the list is
a space separated list, as may be provided by the user, then this
principle fails as reported in #25656.
This is fixed by keeping improved behaviour, while popping from an
alternative SHIELD-NOTFOUND list instead.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This doesn't work as expected with kernel page table isolation
turned on, and fixing it would likely lose any latency benefits
that direct ISRs are supposed to provide.
For now, just prevent these macros from being defined if KPTI
is turned on, like other arches that do not implement this
feature.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This parameter points to the driver instance private data, and not to
its configuration data, which one is set via cfg_info parameter.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
I believe the devicetree documentation for the release is in good
enough shape now. Add a few more links to the release notes to provide
users with more hints for adapting to the new API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is preparation for an additional test suite specifically for the
legacy API which will be added next.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove some deprecated or obsolete functionality:
- the 'title:' key is now deprecated
- more than 2 levels of child-binding are now supported
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
At some point, "child-binding:" apparently only worked up to 2 levels
deep. That's not the case anymore, but add a regression test to make
sure that doesn't break. 3 levels deep ought to be enough for anyone.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added configuration which allows to run test-suite
on nrf52840dk_nrf52840 and nrf52dk_rf52832 boards.
fixes#25701
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Set 'log_backend_rtt:panic_mode' before calling 'log_backend_std_panic',
because otherwise the RTT backend behaves as if the system is NOT
panicking and tries to do asynchronous writes via RTT_LOCK/UNLOCK.
Signed-Off-By: Andrew Fernandes <andrew@fernandes.org>
Increase the main thread stack size for this test
to 2048; this increase prevents stacking errors in
the main thread, in several Cortex-M platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The power configuration is dependent on which SPI is physically used.
In order to allow DT_INST_FOREACH_STATUS_OKAY() to iterate through
instances without the assumption that index 0 corresponds to SPI0
(which would be incorrect in the case when only SPI1 is enabled),
we need to check the base address to identify which SPI is being dealt
with.
Fixes#25673
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Mutex operations check ownership against _current. But in an
ISR, _current is just whatever thread was interrupted when the
ISR fired. Explicitly do not allow this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
