when running multiple instances of sanitycheck, allow placing the
parsetab.py in a customer location that can be set using an environment
variable.
export PARSETAB_DIR=/tmp/
run sanitycheck and the parsetab.py will be placed in /tmp/.
Fixes#4513
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have now different runners/handlers, so avoid using qemu terminology
for the generic classes and for generic usage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Passing ARCH during the build process is something from the past and
samples/tests should not do that, remove it here to catch any
violations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the move to YAML format and the change in how we define default
platforms this is no longer needed as we are able to set multiple
default platforms per architecture and not using a list based on
priority anymore.
Fixes#4445
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The section terminology was relevant with the ini syntax, with yaml we
can call this a test and avoid confusion and make the code more
readable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplify parsing of yaml structures and remove usage of cp which was for
the ConfigParser used for ini files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch removes the extraneous priv_insn test as it is a duplicate
of the following test that writes to the control register. For ARM,
unprivileged contexts which access control registers does not result
in a fault. It results in no modification of the register, so we have
to check that a modification occurred.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes the calculation of the privileged stack portion. The
ztest threads have a stack size of 2048. The privileged area resides in
the lowest 512 bytes. So use the definition of the stack size to get to
the right area.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Empty CMakeLists.txt in l2 and l2/ieee802154 deserved to get filled-in
relevantly, instead of centralizing everything in ip/ location.
Also making sure lines don't get over 80 chars.
Also, no need of linking against mbetls unless net shell is enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Testcase yaml requires some interactive inputs to be provided for
execution and hence fails on automation. Hence making it as build
only
Signed-off-by: ravishankar karkala Mallikarjunayya <ravix.shankar.km@intel.com>
1. MLD events now can happen before the test starts to run, (at iface
initialization time), so use static initialization of test semaphore.
2. Don't use a well-known multicast group like ff02::1 (all nodes),
as they are managed by the underlying stack. Use a dedicated test
address (ff10::1 here).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Now that proper solicited-node multicast group joing is implemented,
promiscuous mode's purpose is reduced to just debugging needs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
https://tools.ietf.org/html/rfc4862#section-5.4.2 :
"""
Before sending a Neighbor Solicitation, an interface MUST join the
all-nodes multicast address and the solicited-node multicast address
of the tentative address.
"""
So, joining should happen before sending DAD packets, and it should
happen for each unicast address added. This is achieved by joining
from net_if_ipv6_addr_add() call. Note that we already leave
solicited-node group from net_if_ipv6_addr_rm(). In particular, we
leave it if DAD fails (as that function is called in this case).
Fixes#5282.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The CMakeLists.txt file was reading ${BOARD}, but this means the user
must set BOARD like this cmake -DBOARD=foo. The user must be allowed
to set BOARD from the environment.
The code was unnecessary anyway because the convention
prj_${BOARD}.conf is known by boilerplate and therefore not necessary
to specify.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This introduced two BTP events to indicate provisioning link state.
This is needed for testing purposes, since PTS requests tester to
confirm link state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
A very annoying usability issue is that the error message is very
cryptic when you create a zephyr library that doesn't have any source
files. Creating such a library is very easy to do, so we should have a
good error message for it.
It was also considered to allow empty libraries to exist, but this was
decided against as they show up in the build output and can confuse
the end user.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Print the usage when an invalid board is given, this somewhat
allievates the catch-22 where you need to run CMake to know what
boards exist, but you need a board to run CMake.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There is a catch-22 in that you need to run CMake to get a build
system that can show you usage, but you need to know the usage to be
able to get a build system.
This assert could be used to improve the usability somewhat. When
invalid usage is detected it can be used to print the usage.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We have removed this features when we moved to the unified kernel. Those
functions existed to support migration from the old kernel and can go
now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will be used for verification in GATT test cases.
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When the controller is connecting to multiple connectable
advertisers, the events are scheduled consecutively avoiding
overlapping events. Calculation of the window offset did not
consider the preparation time before the event, causing the
new master role connection event to overlap with previous
event. This is now fixed by including the preparation time
in the used window offset from the end of connect_ind PDU
transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to insufficient ISR stack memory the irq offload was
corrupting the memory.
GH-4766
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Final edit pass on the release notes prior to 1.10 release.
Fixed misspellings in GitHub issues title (here and in GitHub).
Updated doc changes.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
I can't explain why "make run" worked before, but after this patch it
should definitely work.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The exticrX registers were shifted by a word, so configuring
an EXTI line on a port different of PA misconfigured the EXTI line
source and could flood with unwanted events.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This board doesn't support the 'flash' goal, which was mistakenly
included during the CMake conversion.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
