Provide a random driver wrapped around the MCUX TRNG driver.
Change-Id: Icbd7ab587aa18ecbd7eae52290aaa5d8ee504cf2
Origin: Original
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
MCUX contains more than one type of random number generator,
so refrect this in config and file names.
Change-Id: Iba4482a1ae41f35d471686f8b159c113147c4df8
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Fix c6e27a05 was too aggressive. It turns out that bluetooth on the
Quark SE boards won't enable it's own UART, because it had always been
enabled. Apps that don't do it already will be broken.
Enable UART_QMSI_0 whenever BLUETOOTH_H4 is pulled in on this
platform.
Change-Id: I5e21c6004714adba8fb0fafa056dc2d62698a3d1
Issue: ZEP-1788
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Cube HAL implements timeout based on 1ms tick.
This commit allows Cube HAL to get Zephyr system clock.
Change-Id: I9a59edcf6fa8e0ebfd5040348db537dadd9fcdfa
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to support the discovery STM32F4 and STM32F429 boards,
it is necessary to make these socs available.
Change-Id: I351d294fb02c4385f291a6e258a3f7d81e85627e
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The defconfigs would always create a device for UART 0, which is
problematic in circumstances where both the x86 and ARC cores are
alive and one wants to use it in a non-default configuration.
Specifically: on Arduino 101 this is the bluetooth device and it
operates at 1MBps instead of of 115200kbps. If an x86 app sets this
up correctly, but then starts the ARC core running an app which
doesn't reference this UART at all, the device will still exist and
set up the (wrong!) configuration, clobbering the correct settings.
Just remove the "def-bool y" bits from the defconfig. There's no
need, users of these devices (e.g. the console) will enable them
anyway. There's no value to compiling it in without a configured
user.
Issue: ZEP-1677
Change-Id: I4a0e944f23705495433e9f3d0459065f131579cb
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, if IRQ number != RISCV_MACHINE_TIMER_IRQ (only device IRQ in qemu),
riscv32-qemu was considering the IRQ as an exception. However, fake IRQs
can also be generated by setting corresponding bits in the Machine Interrupt
Pending register (mip). With the current implementation, these IRQs were
considered as unexpected exceptions.
To circumvent the problem, update the IRQ filtering mechanism by considering
an IRQ (IRQ number as reported by the mcause register) as an exception only
if its corresponding bit is NOT set in the mip register.
Change-Id: I4c581a84d83ee0ba2c4ea35f89ba732401eb8fa4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The interrupts would be placed at incorrect offsets on systems where
some interrupt vectors are reserved for exceptions, such as ARC.
Change-Id: I5b1f00eb9e8aecb84ae66e3d0461a734ffb5fbe6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If this is set incorrectly things will break all over the place.
Needs a default defined per-arch and left alone.
Change-Id: I3f8c842937a240297ee21589a22a7a9e51dbdfad
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The wrong UART was set on for the qemu_cortex_m3 slip (uart pipe) device
Change-Id: If6d6af0f32ef02ccc559cd1fff90ea499cc378c4
Signed-off-by: Richard Peters <mail@richardpeters.de>
Added a riscv-privilege.h header file that contains common
definitions for all riscv SOCs supporting the riscv
privileged architecture specification.
This shall ease addition of future riscv SOCs supporting
the riscv privileged architecture spec.
Change-Id: I5714bf70eeda738a25967ed26d3d0d2aaa0c9989
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
When an IRQ is serviced, the ISR dispatcher will check for any new thread in
the ready queue and switch to it. However, if the current thread is marked as
non preemptable due to _kernel.current->base.preempt > _NON_PREEMPT_THRESHOLD
then we should not switch to another one.
Change-Id: Icdc08105cc6433da479bb95265710462a0f37c0b
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This core is not depreciated and compilationfor it is even faster than D_233L.
Change-Id: I6b8149ca9e879770c3ed0973ffb9304e2e3c8d8d
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
1) Fatal errors now all go through _SysFatalErrorHandler. When the
simulator is used, only the death of 'essential' threads will result
in the simulator exiting; some test cases that test exceptions may
actually expect a thread to terminate abnormally.
2) The human readability of the exception errors is improved.
Change-Id: I77f57ea0eae15b0c55237681b959cd21e3fe8c1c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The a3 register was supposed to hold the _thread pointer but it seems that it
does not in all cases. Safe to restore it from _kernel structure.
Change-Id: Ie2ff6c3faf0fe70de4c5877ab59433d0c165145b
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This change should allow threads that do not access coprocessor to safely
overflow on the coprocessor save area without any issue.
Change-Id: Ic2acd20b60b6bef0b7feeb8cfb54d548eba892f0
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This was a kind of optimization that save few cycles in the cost of code
duplication. However the path where we resume from interrupt withouch changing
the running thread is buggy and leads to many tests to fail. For now I'd prefer
to remove this optimization and have a working port. Later, once everything is
OK, I'll have time to optimize things.
Change-Id: I7af58f383848d157b9f3b3fbeceede3e83f9ce61
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Having duplicate code leads always to this kind of situation where a bug is
fixed in one place and not in the other. This bug of updating current thread
pointer was already fixed before in the Swap function, but not in the interrupt
handler.
Change-Id: I466aea2d35382446c5c82fe775ada31f0bd19492
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Some options which are already defined by the build system
for the C compiler or assembler have been removed: -c,
-xassembler-with-cpp, -nostdinc.
References to deleted variable flagALongCall and flagLongCall
removed.
Formatting for 80 columns, there is now one flag per line.
Change-Id: Ieecdb75e26f64c6f58dec3cc636552e7b31a678d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The retval field shall hold the return value itself not a pointer on its
location.
Change-Id: I3f9e225f2bdd501f88441946b5187ebbd17a71e3
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This was introduced during a copy/paste when updating patch
https://gerrit.zephyrproject.org/r/#/c/10323/6..7
Change-Id: Id6857dd28a16974361932285b44559f702c4d910
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This function needs to be decalred in a file included by _thread_entry.
It also needs to have exit function declared as not returning.
Change-Id: I2a01e7408cf70266351ae5089f45b5d9d009fabe
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
The function _new_thread sets the CALLINC for _thread_entry when calling the
new thread entry point. This should be CALLINC(1) (call4) instead of previous
one CALLINC(2) (call8).
This change allows resolving a crash when starting the first thread.
Change-Id: Ie97c95c87d1219342fed09f670fcae8a6230cefe
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
These libraries are unlikely to be uesd by GCC port and thus should not be in
a generic make file. Moved to specific toolchain make file.
Change-Id: Ib585b87700e409d678f7a5cb60cff67b6022ab05
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Provide generic support for running zephyr kernels on xtensa QEMU and
map D_233L SoC to dc233c QEMU core.
Change-Id: Ie804588f750213a7cc54dbc95c86ee4d62ba1ea5
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Added arch sub folder, make files and Kconfig files for a set of standard SoCs.
Change-Id: I4ee9cba966860072e55c95795d87356b665e4d49
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This replaces the hard-coded vector table, as well as the
software ISR table created by the linker. Now both are generated
in build via script.
Issue: ZEP-1038, ZEP-1165
Change-Id: Ie6faaf8f7ea3a7a25ecb542f6cf7740836ad7da3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a new mechanism for generating interrupt tables which will
be useful on many architectures. It replaces the old linker-based
mechanism for creating these tables and has a couple advantages:
1) It is now possible to use enums as the IRQ line argument to
IRQ_CONNECT(), which should ease CMSIS integration.
2) The vector table itself is now generated, which lets us place
interrupts directly into the vector table without having to
hard-code them. This is a feature we have long enjoyed on x86
and will enable 'direct' interrupts.
3) More code is common, requiring less arch-specific code to
support.
This patch introduces the common code for this mechanism. Follow-up
patches will enable it on various arches.
Issue: ZEP-1038, ZEP-1165
Change-Id: I9acd6e0de8b438fa9293f2e00563628f7510168a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to set breakpoints after waking up from sleep,
it is needed to save DR0/DR1/DR2/DR3 and DR6/DR7.
As DR4/DR5 are reserved or mapped to DR6/DR7, they are not saved.
Patch2 : Added compile time checks for debug build or soc_watch
build for Intel Energy analysis.
Patch3 : Avoid clobbering of edx.
JIRA: ZEP-1681
Change-Id: I62fbedca16953d57196420ecae4fb93c785bb4a5
Signed-off-by: Sarath R Nair <sarath.nandu.ramachandran.nair@intel.com>
This patch moves the include for the generated_dts_board.h inside of
the include/arch/arm/arch.h file. This was done to simplify the
includes required for files. Only two files will include the dts
generated include file directly: arch.h and the linker.ld
Change-Id: I2614f4fd4eeed2ab635a3264d7dac8b83f97b760
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We now use CMSIS for ARM Cortex-M SoCs so we can remove the last bits of
scs and scb.
Jira: ZEP-1568
Change-Id: I0c7c45b0321dc402ed594e9faffb5109922edcf0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Coverted:
_ScbMemFaultMmfarReset
_ScbBusFaultBfarReset
_ScbUsageFaultAllFaultsReset
To use direct CMSIS register access.
Also removed scb.h and references as there is no longer any code in it.
Jira: ZEP-1568
Change-Id: I469f6af39d1bd41db712454b0b3e5ab331979033
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The previous code incorrectly used the value 0xfe to clear the mem and
bus faults. It attempted to handle the address register valid bits
separately, but reversed the bit order.
Jira: ZEP-1568
Change-Id: I240d072610af9979ca93c0081ed862df08929372
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converted access to CFSR MMFSR, BFSR, and UFSR to use direct CMSIS
register access when printing out the values of those registers.
Jira: ZEP-1568
Change-Id: I7969bb81346327637140ec23d91422a6bfaef032
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Coverted:
_ScbBusFaultAddrGet
_ScbMemFaultAddrGet
To use direct CMSIS register access
Jira: ZEP-1568
Change-Id: Ic49b3ac3fc4fb63d413f273569c77f6539e4e572
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pin number should be decremented by 8 if the pin
refers to the GPIOx_AFRH register.
Change-Id: I76e960f3b4adc3c2139ef5a88f15dbe98603228e
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Following activation of Cube LL based clock control driver,
this commits cleans up the useless structures for RCC definitions
and remove code relative to native F3 Clock control driver.
Change-Id: I6f3ee44adb09adc52927eb4b05f8a829665eb96d
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following activation of Cube LL based clock control driver,
this commits cleans up the useless structures for RCC definitions
and remove code relative to native L4 Clock control driver.
Change-Id: Ic0408d5f5ec66651d46d13dfaf447da2666367cd
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
After introduction of STM32Cube based clock control driver for
stm32 family, provide its support on stm32f3x soc.
Clean up will have to be done afterwards.
Change-Id: I20480579f12a6fc1f1f6a51589981ac3f1d63ef0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
After introduction of STM32Cube based clock control driver for
stm32 family, provide its support on stm32l4x soc.
Clean up will have to be done afterwards.
Change-Id: I979a4169148c5fe5a0693d182d2d17f9ffaf1c77
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds the base DTS support for the KW41Z Freedom board. The
initial set of changes include SRAM, FLASH, IRQ controller and LPUART
support.
Change-Id: Ic68c4959ddad0c5cfe70d5576a0e58372b93ec9d
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This patch adds DTS support to the ARM CMSDK UART driver. The DTS
currently specifies the IRQ, IRQ PRIO, and base address of the port.
Change-Id: I8e5bc81c013958be4297d563495bf126b53a83a9
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds all the necessary changes to enable use of DTS for
generating required build information.
Change-Id: Ia476fbb14c7d9d6b9db3340c73f599556a880da3
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch ifdef's out information that would be redefined by
information generated from DTS. This patch also fixes up the serial
drives to work properly with the DTS generated information.
Change-Id: I912ccf35be23c107705a4866e5a68b3b51154ffa
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support and related files for the NXP Kinetis
platform. The DTS files contain the base definitions for the hardware
nodes on Kinetis platforms. The YAML files provide the definitions of
the contents of the DTS nodes.
The Kconfig changes were put in place to allow for the conversion of
existing drivers. Once those drivers are modified, the Kconfig options
that are replaced by the DTS information will be removed.
Change-Id: If110fffa99c0b12471cf2df206da6687277e4756
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Without this patch, the final linker script had a memory region defined
as:
RAM (wx) : ORIGIN = 0xA8006400, LENGTH = 55*1K - 0x20 +0x4
resulting on the wrong RAM length. Fix BSP_SHARED_RAM_SIZE definition
so the sum is always processed first.
Change-Id: I16b93adbaf27bb84b6e5d1ac433ef80f854b218c
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Arch-specific stuff shouldn't be in the toplevel Makefile,
forthcoming patches will soon introduce special interrupt
handling logic for other arches.
Change-Id: Ib5a86cbdf5b32ecfce9e5e234f7cbea2bc3ce9c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This private data structure now no longer introduces a typedef or
uses CamelCase. It's not necessary to specify the size of extern
arrays, so we don't need a block of #ifdefs for every arch.
Change-Id: I71fe61822ecef29820280a43d5ac2822a61f7082
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit removes the local implementation of enter_arc_state, where
the ARC is instructed to sleep, using instead the QMSI 1.4 functions.
Change-Id: Id489ad53851be50fc5e50add698891fcfaef3abe
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
This flag is no longer necessary and TICKLESS_IDLE will be
enabled by default if SYS_POWER_MANAGEMENT is enabled.
Jira: ZEP-1325
Change-Id: Ic6cd4b8dc0a17c6a413cabf6509b215a4558318d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A new shared memory area has been added to the QMSI bootloader in
order to store the GDT in RAM reliably.
Add the new entry to the QUARK D2000 linker script and new
kconfig options:
* CONFIG_BSP_SHARED_GDT_RAM_ADDR to set the address location
of the GDT in RAM.
* CONFIG_BSP_SHARED_GDT_RAM_SIZE to set the size used by the
GDT in RAM.
This is only enabled when CONFIG_SET_GDT is NOT set.
Change-Id: Ie084079475853dce153dd9f3e88ad4a9784bdedf
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
A new shared memory has been added to the QMSI bootloader in order to
store the GDT in RAM reliably.
Add this new entry to the QUARK SE C1000 linker script and new kconfig
options:
* CONFIG_BSP_SHARED_GDT_RAM_ADDR to set the address location
of the GDT in RAM.
* CONFIG_BSP_SHARED_GDT_RAM_SIZE to set the size used by the
GDT in RAM.
Additionally, both BSP_SHARED_RAM_ADDR and BSP_SHARED_RAM_SIZE have been
renamed to BSP_SHARED_RESTORE_INFO_RAM_ADDR and
BSP_SHARED_RESTORE_INFO_SIZE respectively, in order to better resemble
what these options are for. All these configs are available
unconditionally.
Change-Id: I07ee8b440d4a3f5e9bdeb62441ff6a7bd6d4c153
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Bartlomiej Majka <bartlomiejx.majka@intel.com>
For the next QMSI release, the shared restore info address has been
modified to 0xA8013FDC .
Change-Id: I72eaef4f15f7ef6fb8e7eb9acd7d96451623e103
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Update the builtin QMSI code to 1.4 (RC2).
The below shim drivers were updated for API or interface changes:
- aio
- counter
- i2c_ss
- rtc
- wdt.
Also, arch soc specific power management code were updated.
Jira: ZEP-1572
Change-Id: Ibc8fae032a39ffb2c2c997f697835bc0208fd308
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
The entry point specified in the elf file should always point to
executable code, and not to the interrupt vector table. Pointing to the
vector table as the entry point in the elf file presents problems with
running the kernel against a debugger as the debugger starts the program
counter at the top of the interrupt vector table.
Change-Id: I76051f6e99a44bab72936670bead5fb8191a6ec7
Signed-off-by: Tim Nordell <tim.nordell@nimbelink.com>
Rename devices. For example, the two i2c devices in the
quark se sensor sub-system will have name string "I2C_0"
and "I2C_1", while the other two i2c devices accessible to
both x86 and arc will have name string "I2C_2" and "I2C_3".
This is valid only when you build arc binary.
It does not apply if you build x86 or arm binary. Similar change is
also made for GPIO and SPI.
Jira: ZEP-1588 ZEP-1614
Change-Id: Ibad4486e70e0aaf287763514a5a9d28b43bca094
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Added a linker script that shall be common to most riscv SOCs.
Linker script also accounts for execution in place in ROM, when
CONFIG_XIP is set.
Nonetheless, riscv32 SOCs (like pulpino) requiring a different
system layout can still define their own linker script.
Change-Id: I3ad670446d439772c29a8204e307ac79643dc650
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
riscv defines the machine-mode timer registers that are implemented
by the all riscv SOCs that follow the riscv privileged architecture
specification.
The timer registers implemented in riscv-qemu follow this specification.
To account for future riscv SOCs, reimplement the riscv_qemu_driver by
the riscv_machine_driver.
Change-Id: I645b03c91b4e07d0f2609908decc27ba9b8240d4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This is a zero-copy networking implementation of Ethernet driver.
Limitations:
- one shot PHY setup, no support for PHY disconnect/reconnect
- no support for devices with DCache enabled due to missing
non-cacheable RAM regions in Zephyr.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1492
Change-Id: Ib944f91193efbd12c1142b0bcf1f635388bf1b87
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added basic USART driver for Atmel SAM MCU family. USART is a very
comprehensive module, currently only basic features sufficient to
support printf functionality are implemented by this driver.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-978
Change-Id: Ia9710e4069243fb6c30de45953dfc1fe1266b63a
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
Added common, internal, always available SAM HAL drivers: pmc, gpio.
Note: these drivers are meant to be used by other SAM drivers, not by
a user space program directly.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-978
Change-Id: I00cca358f27790dc94cf79f840584b85ff5191f6
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
Added support for early SoC configuration which does not belong
conceptually to system initialization. ERASE, JTAG TDI pins are
currently configured here.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-978
Change-Id: Id51adddb4c7cce22907af214461d75db83df129a
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added support for Atmel SAM E70 (Cortex-M7) MCU:
- Kconfig files
- device start-up code
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-978
Change-Id: Ide4fd5dadd94897303090a6507b8d048773b645e
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
As cpu_idle.S is the only bit of code that is using the SCB asm defines,
so to allow us to remove scb.h in the future lets move the defines that
are used just into cpu_idle.S
Jira: ZEP-1568
Change-Id: I3c3a6f145ec4c1a43f076d079d5fe1694c255b78
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of SoCs clear out the Mem/Bus/Usage and Hard Fault exceptions
during init. Lets refactor that into a common function so we don't have
to keep duplicating it over and over.
Change-Id: Ida908a9092db37447abcf3c9872f36937982f729
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch fixes the UART4 base address on the ARM MPS2 platform.
Change-Id: I14bf2a4dc2378d4b2c4295a75cd68c6c895fbd60
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Kill of nvic.h and use either CMSIS helper functions for NVIC or direct
NVIC register access via CMSIS for IRQ handling code.
Jira: ZEP-1568
Change-Id: If21910b9293121efe85c3c9076a1c2b475ef91ef
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace _ScbExcPrioSet with calls to NVIC_SetPriority as it handles both
interrupt and exception priorities. We don't need to shift around the
priority values for NVIC_SetPriority.
Jira: ZEP-1568
Change-Id: Iccd68733c3f7faa82b7ccb17200eef328090b6da
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the configuration parametes required to enable CMSDK
(Cortex-M System Design Kit) Drivers at MPS2 soc level.
It provides as well the definitions for the MPS2 System Control
registers.
Change-Id: I06181dcfeb4fb887425b85ec9a99c268c857a34e
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Adds initial support for the kw41z SoC. This is the first SoC in the
Kinetis W (wireless connectivity) series added to Zephyr. The kw41z
integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an
802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash,
128 KB SRAM, and can run the system clock at up to 48 MHz.
This SoC currently has mcux shim drivers for lpuart (serial), gpio,
pinmux, i2c, and flash.
Jira: ZEP-1389
Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the flash security section so it makes sense for other Kinetis
devices, not just k64. In Kinetis reference manuals, this section is
referred to as the 'flash configuration field'.
Change-Id: I2b7c7cc1ec2541419d77878d367d96c9ceb7a0cf
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux lpuart driver to adapt it to the Zephyr
serial interface.
NXP has multiple uart hardware blocks that implement different features
and have different register maps. The k64 has a uart block called
'uart', while the kw41 has a uart block called 'lpuart' (low power
uart). The MCUXpresso SDK provides separate drivers for each type of
uart block but with similar software interfaces. As a result, there are
also separate shim drivers in Zephyr. There is a 1:1:1 relationship
between hardware block, mcux driver, and mcux shim driver.
Because we now have two mcux shim drivers for the uart interface, a new
naming convention is created:
<interface>_mcux_<hw block>
Where <interface> is the name of the Zephyr interface, in this case
'uart'. This convention is not new.
<hw block> is the name of the NXP hardware block, in this case 'lpuart'.
This is the new part, and distinguishes different hardware blocks
for the same interface.
Change-Id: I3a80b9bffa116bbb2b02ee950d4bdd79a19a4edc
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Nordic Semiconductor's Software Development Kit's HAL layer
provides a set of low-level header and sourcefiles that give access
to the different hardware peripherals of Nordic ICs.
This patch includes the new files in the build and refactors the Kconfig
and Kbuild files in ext/hal/nordic to acommodate for the presence of the
new HAL layer.
Change-Id: Ie8e1a4c9fcc7e9058a9d16a2692ef1789603aa53
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The STM32 GPIO driver extended the generic GPIO driver interace with
the concept of OPEN_DRAIN. There is previous discussion about
representing such concepts in the GPIO interface in a more general
fashion here:
https://lists.zephyrproject.org/archives/list/devel@lists.zephyrproject.org/thread/6DCFUAKCOOOBHUO3ZK45ES6IQXOEOFWN/
The DRIVE STRENGTH interface supports the concepts of OPEN DRAIN and
other variants supports by other vendors hardware.
Adjust the STM32 GPIO driver to use the DRIVE STRENGTH interface. A
following patch will address the simplication of gpio.h
Change-Id: I56b0792ec2b21f1adc673dff019288dc8573d005
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
They are internal states, not user-facing.
Also prepend an underscore since they are kernel internal symbols.
Change-Id: I53740e0d04a796ba1ccc409b5809438cdb189332
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
They are not part of the API, so rename from K_<state> to
_THREAD_<state>.
Change-Id: Iaebb7d3083b80b9769bee5616e0f96ed2abc5c56
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace _scs_relocate_vector_table with direct CMSIS register access and
use of __ISB/__DSB routinues. We also cleanup the code a little bit to
just have one implentation of relocate_vector_table() on ARMv7-M.
Jira: ZEP-1568
Change-Id: I088c30e680a7ba198c1527a5822114b70f10c510
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CMSIS provides a complete implentation for reboot, we can utilize it
directly and reduce zephyr specific code.
Jira: ZEP-1568
Change-Id: Ia9d1abd5c1e02e724423b94867ea452bc806ef79
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As a first step towards removing the custom ARM Cortex-M Core code
present in Zephyr in benefit of using CMSIS, this change replaces
the use of the custom core code with CMSIS macros in
enable_floating_point().
Jira: ZEP-1568
Change-id: I544a712bf169358c826a3b2acd032c6b30b2801b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Support using CMSIS defines and functions, we either pull the expect
defines/enum from the SoC HAL layers via <soc.h> for the SoC or we
provide a default set based on __NVIC_PRIO_BITS is defined.
We provide defaults in the case for:
IRQn_Type enum
*_REV define (set to 0)
__MPU_PRESENT define (set to 0 - no MPU)
__NVIC_PRIO_BITS define (set to CONFIG_NUM_IRQ_PRIO_BITS)
__Vendor_SysTickConfig (set to 0 - standard SysTick)
Jira: ZEP-1568
Change-Id: Ibc203de79f4697b14849b69c0e8c5c43677b5c6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In preperation for removing the scb/scs layers and using CMSIS directly
lets remove all the _Scb* and _Scs* functions that are not currently
used.
Jira: ZEP-1568
Change-Id: If4641fb9a6de616b4b8793d4678aaaed48e794bc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ARM's Cortex-M Prototyping System (or MPS2) [1] is a board containing
devices such as RAM, ethernet and display, and at its heart there is an
FPGA which can be programmed with various 'SoCs' which implement the
CPU, SRAM, UARTs, SPI, DMA, etc. There are also software simulations of
systems based on this hardware which are part of ARM's Fixed Virtual
Platforms (FVPs).
All of the above could be regarded SoCs in the same series so we will
treat them as such in Zephyr.
In this initial patch we add SoC support for the public FPGA image
which implements a Cortex-M3 CPU, and includes definitions to support
use of the UARTs on this.
ARM's documentation for MPS2 images are titled 'Application Note ANnnn'
where the number nnn is different for each 'SoC'. E.g. Application Note
AN385 is for "ARM Cortex-M3 SMM on V2M-MPS2" [2]. The files ARM supply
for programming the board firmware also make extensive use of the ANnnn
nomenclature, so we will use this for the SoC name in Zephyr. E.g. the
Cortex-M3 SoC will be called 'mps2_an385'. Note, it is not possible to
use the CPU type (e.g. M3) for the name as there are multiple FPGA
images for some CPU types (e.g. there are three Cortex M7 images
with differing FPU and MPU support).
[1] https://www.arm.com/products/tools/development-boards/versatile-express/cortex-m-prototyping-system.php
[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0385c/index.html
Change-Id: Ice54f2d2cde7669582337f256c878526139daedd
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Now that we have a more generic mcux spi driver that can be used across
multiple Kinetis SoCs, remove the specific k64 spi driver.
Jira: ZEP-1374
Change-Id: Ifc324374f305837f5e3d2cfd7ad30d3608865b5b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds the timers IRQ map to the ARM Beetle SoC platform.
Jira: ZEP-1300
Change-Id: If38a197210f71ae90c7ee6274395f064116faf72
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
On other targets, CONFIG_TEXT_SECTION_OFFSET allows the entire image to
be moved in memory to allow space for some type of header. The Mynewt
project bootloader prepends a small header, and this config needs to be
supported for this to work.
The specific alignment requirements of the vector table are chip
specific, and generally will be a power of two larger than the size of
the vector table.
Change-Id: I631a42ff64fb8ab86bd177659f2eac5208527653
Signed-off-by: David Brown <david.brown@linaro.org>
Now that we have a more generic mcux serial driver, remove the uart_k20
driver.
Jira: ZEP-719
Change-Id: I51a3237454140feabbfe18ac2c8ee451e572c7be
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Stop using the specific uart_k20 driver by default and start using the
more generic mcux uart driver instead.
Jira: ZEP-719
Change-Id: I7b107ea7118887591362159283ebb5413b45595a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Implementation includes adding some defines in the pinmux,
adjusting gpio driver to specific defines for STM32F3X family,
adding specific functionality in the F3X SoC definition.
Change-Id: I465c66eb93e7afb43166c4585c852e284b0d6e67
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
SOC_FLASH_NRF5 is compatible with any nrf5 device, so enable the driver
by default if CONFIG_FLASH is also enabled.
Change-Id: I6ddf7cc41bb28071f682e78661b184a8e2ee7aa9
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
It is called before early SoC initialization, so remove the duplicated
code from other boards and just set it by default when using XIP.
This can later be used when adding bootloader support, as an
additional option could be created to move the VTOR offset to a
different address.
Change-Id: Ia1f5d9a066de61858ee287215cefdd58596b6b1c
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
pulpino soc has custom-extended riscv ISA that is accounted
for if CONFIG_RISCV_GENERIC_TOOLCHAIN is not set.
(ex: bit manipulation asm opcodes)
Change-Id: I4dafc4ebc2fedcc4eb6a3dedd0412816afea6004
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
RISC-V is an open-source instruction set architecture.
Added support for the 32bit version of RISC-V to Zephyr.
1) exceptions/interrupts/faults are handled at the architecture
level via the __irq_wrapper handler. Context saving/restoring
of registers can be handled at both architecture and SOC levels.
If SOC-specific registers need to be saved, SOC level needs to
provide __soc_save_context and __soc_restore_context functions
that shall be accounted by the architecture level, when
corresponding config variable RISCV_SOC_CONTEXT_SAVE is set.
2) As RISC-V architecture does not provide a clear ISA specification
about interrupt handling, each RISC-V SOC handles it in its own
way. Hence, at the architecture level, the __irq_wrapper handler
expects the following functions to be provided by the SOC level:
__soc_is_irq: to check if the exception is the result of an
interrupt or not.
__soc_handle_irq: handle pending IRQ at SOC level (ex: clear
pending IRQ in SOC-specific IRQ register)
3) Thread/task scheduling, as well as IRQ offloading are handled via
the RISC-V system call ("ecall"), which is also handled via the
__irq_wrapper handler. The _Swap asm function just calls "ecall"
to generate an exception.
4) As there is no conventional way of handling CPU power save in
RISC-V, the default nano_cpu_idle and nano_cpu_atomic_idle
functions just unlock interrupts and return to the caller, without
issuing any CPU power saving instruction. Nonetheless, to allow
SOC-level to implement proper CPU power save, nano_cpu_idle and
nano_cpu_atomic_idle functions are defined as __weak
at the architecture level.
Change-Id: I980a161d0009f3f404ad22b226a6229fbb492389
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Force-align all variables defined via asm .word to ensure 4-byte
alignment.
The straddled_tick_on_idle_enter variable was a bool, which resolved in
an one-byte quantity. Changing it to a 32-bit integer. It would have
occupied 4 bytes anyway with alignment.
Fixes ZEP-1549.
Change-Id: If5e0aa1a75dbc73d896b44616f059d221fe191c6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The mcux pinmux driver enables the port clocks, so the soc init no
longer needs to enable them. Also removes some soc defines that were
used only by the legacy k64 pinmux driver.
Change-Id: I63174bef4024b5a09a73f941cea0aec691c759d3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we have a more generic mcux gpio driver that can be used across
multiple Kinetis SoCs, remove the specific k64 gpio driver.
Jira: ZEP-1394
Change-Id: I177f96a75e441b70c523e74e99f1b7a54eac6b0e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Stop using the specific k64 gpio driver by default and start using the
more generic mcux gpio driver instead.
Jira: ZEP-1394
Change-Id: I54ec9b62cc8790b8973efc34fa36d17da523971e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Moves the uart console pins from the k64 soc init to the frdm_k64f and
hexiwear_k64 board pinmux tables. Not having these pins in the board
pinmux tables led one to believe that no pins in PORTB were being used
on the hexiwear_k64 board, and thus the port was incorrectly disabled by
default.
Also fixes PORTB to be enabled by default if the uart console is used.
Change-Id: Ide6b7b34dfba8a75a02a8f2bf37cce843afb92f1
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch provides initial support for the SoC STM32F107. This SoC
belongs to the Connectivity Line devices.
Connectivity line family incorporates up to 14 communication
interfaces such as: 2 x I2C, 5 x USART, 3 x SPI, 2 x CAN, USB 2.0,
10/100 Ethernet MAC.
Change-Id: I5cb2c458bce9ec1558b4168e87a7003ad9f606a5
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all the ksdk/mcux shim drivers use the config HAS_MCUX, we can
remove the config HAS_KSDK.
Change-Id: I94b7db41efae10c9234681aeb57f94e67a33c262
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Renames the ksdk random generator shim driver to mcux.
Change-Id: I8bc376937fed3024c809782139a0a72c7332f89a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The ksdk pinmux dev driver was previously merged into the regular ksdk
pinmux driver, and the config PINMUX_DEV_KSDK was removed. Two
references were inadvertantly left behind, so remove them now.
Change-Id: I77394be5459d55a9f16e7bd2b3c9d688c4605b4f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
stm32f411re SoC could run at system clock above 84MHz.
This was not taken into account in __setup_flash function which configure
flash latency depending on system clock. This is now corrected.
Assert added to ease error detection.
Change-Id: I49b92256d611ef464171fb1d8812a4c4d3c27ab8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Previously, CC3200 drivers had two options to use the peripheral
driver library APIs:
1) Build driverlib SDK files in Zephyr, in ext/hal/ti/cc3200/*
2) Link directly with the driverlib.a, from an externally installed
TI CC3200 SDK.
A new option is added to replace option 2), and is now the default:
3) Use the driverlib functions already provided in ROM.
This enables a savings in code size, which will depend on the
types of device drivers configured and the number of SDK
APIs actually used.
A rom_report build of the shell sample application showed
a savings of about 2kb in code space using this new config option.
Change-Id: Ie1ede6f7aacd23db20f5292e776f1dfeab5c7fe0
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The cortex-m7 is an implementation of armv7-m. Adjust the Kconfig
support for cortex-m7 to reflect this and drop the unnecessary,
explicit, conditional compilation.
Change-Id: I6ec20e69c8c83c5a80b1f714506f7f9e295b15d5
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged that conditional compilation hanging
on CONFIG_CPU_CORTEX_M3_M4 provides support for ARMv7-M, rename the
config variable to reflect this.
Change-Id: Ifa56e3c1c04505d061b2af3aec9d8b9e55b5853d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged all conditional compilation hanging on
CONFIG_CPU_CORTEX_M0_M0PLUS such that it actually represents support
for ARM ARMv6-M, rename the config variable to reflect this.
Change-Id: I553fcf3e606b350a9e823df31bac96636be1504f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The ARM code base provides for three mutually exclusive ARM
architecture related conditional compilation choices. M0_M0PLUS,
M3_M4 and M7. Throughout the code base we have conditional
compilation gated around these three choices. Adjust the form of this
conditional compilation to adopt a uniform structure. The uniform
structure always selects code based on the definition of an
appropriate config option rather the the absence of a definition.
Removing the extensive use of #else ensures that when support for
other ARM architecture versions is added we get hard compilation
failures rather than attempting to compile inappropriate code for the
added architecture with unexpected runtime consequences.
Adopting this uniform structure makes it straight forward to replace
the adhoc CPU_CORTEX_M3_M4 and CPU_CORTEX_M0_M0PLUS configuration
variables with ones that directly represent the actual underlying ARM
architectures we provide support for. This change also paves the way
for folding adhoc conditional compilation related to CPU_CORTEX_M7
directly in support for ARMv7-M.
This change is mechanical in nature involving two transforms:
1)
#if !defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
2)
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#else
...
#endif
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
#else
#error Unknown ARM architecture
#endif
Change-Id: I7229029b174da3a8b3c6fb2eec63d776f1d11e24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Adjust the layout of various ARM assember files to conform to the norm
used in the majority of files.
Change-Id: Ia5007628be5ad36ef587946861c6ea90a8062585
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
I've moved the call for icache_setup from nanoArchInit() to
_PrepC(), because there is a lot of code executed now before
nanoArchInit() is called, and all this time the i-cache would
be off. It should be turned on as early as possible to make
initialization faster.
Change-Id: I76a809d57a1bf9aacf51e7bb9fe8c8425f37aa13
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The 16k RAM nRF51 variants pose a challenge to get applications to fit
within the available memory. Make the default ISR stack size smaller
than the previous 2k default, but big enough to run fully functional
Bluetooth controller and host stacks.
Change-Id: Ie7c5bb21a3ba620d283e6228a2482d280f85119d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
On the nRF5x platforms we need always need the NRF_RTC_TIMER and it
depends on the CLOCK_CONTROL_NRF5. So enable all of these always.
Fixes issues if one tries to build nRF5x platforms w/o CONFIG_BLUETOOTH.
Change-Id: I0f9af785e785f37ec289a935ddf70ee6dec08cd4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These two fields in the thread structure control the preemptibility of a
thread.
sched_locked is decremented when the scheduler gets locked, which means
that the scheduler is locked for values 0xff to 0x01, since it can be
locked recursively. A thread is coop if its priority is negative, thus
if the prio field value is 0x80 to 0xff when looked at as an unsigned
value.
By putting them end-to-end, this means that a thread is non-preemptible
if the bundled value is greater than or equal to 0x0080. This is the
only thing the interrupt exit code has to check to decide to try a
reschedule or not.
Change-Id: I902d36c14859d0d7a951a6aa1bea164613821aca
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some thread fields were 32-bit wide, when they are not even close to
using that full range of values. They are instead changed to 8-bit fields.
- prio can fit in one byte, limiting the priorities range to -128 to 127
- recursive scheduler locking can be limited to 255; a rollover results
most probably from a logic error
- flags are split into execution flags and thread states; 8 bits is
enough for each of them currently, with at worst two states and four
flags to spare (on x86, on other archs, there are six flags to spare)
Doing this saves 8 bytes per stack. It also sets up an incoming
enhancement when checking if the current thread is preemptible on
interrupt exit.
Change-Id: Ieb5321a5b99f99173b0605dd4a193c3bc7ddabf4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use least significant bits for common flags and high bits for
arch-specific ones.
Change-Id: I982719de4a24d3588c19a0d30bbe7a27d9a99f13
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow for an enhancement when checking if the thread is
preemptible when exiting an interrupt.
Change-Id: If93ccd1916eacb5e02a4d15b259fb74f9800d6f4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=quarkse_em.
Change-Id: I9dec26dd64b4738976704a39455fe4241406db9e
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=arcem.
Change-Id: Ic86bf51cd5fb1a67ba2cd75998cd907e26996347
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
This option has side effects. It also tells the compiler not to generate
these checks in the first place. The checks call abort() which doesn't
exist in our environment.
This patch gets rid of linker errors due to missing abort() in the 0.9 SDK.
Change-Id: Ibc5aeb5458d0bded714c9c074cdf08112733428b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Cortex-M0(+) and in general processors that support only the ARMv6-M
instruction set have a reduced set of registers and fields compared to
the ARMv7-M compliant processors.
This change goes through all core registers and disables or removes
everything that is not part of the ARMv6-M architecture when compiling
for Cortex-M0.
Jira: ZEP-1497
Change-id: I13e2637bb730e69d02f2a5ee687038dc69ad28a8
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable arc to access the i2c controller on I/O fabric.
There are two i2c controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the i2c controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add i2c_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1189
Change-Id: I317da6038c50e0c8bd16f446182c1f8bdf6d3ba2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
HW allows both arc and x86 to access the pwm attached to the
quark soc I/O fabric. The existing code only allows x86 to
do this. Let's give arc the access.
Change-Id: Ie88649fea41bf86b84876c260f97dd4c12fd0b81
Signed-off-by: Baohong liu <baohong.liu@intel.com>
Obsolete, replaced by _set_thread_return_value().
Change-Id: I23e9cfc07e43542f0965817edc3552d456fd2ef3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Previously, UART clock enable was done in pinmux init.
This is now moved into soc initialization, along with other
power related initialization routines.
Change-Id: I1f9464655ad966e9caac2d238006f12a06b202ab
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
To make way for the upcoming blinky and GPIO support for nRF5x-based
boards, this change addresses the hardcoded dependencies in Kconfig
default configurations of the different boards, moving the common option
defaults to the SoC default configuration itself.
Change-Id: I8db0750311ad5a12b76237b39438376f20f6f496
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/basic/blinky
- samples/basic/disco
- samples/basic/button
All 4 GPIO ports are supported.
Change-Id: If8599a23c1d56cfd678a6e2e5339f7e093c6061a
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The new Nordic nRF52840 IC is the latest member of the nRF52 family.
It supports the following features among others:
* Cortex-M4F core at 64MHz
* 1024KB of flash and 256KB of RAM
* Bluetooth 5-ready and 802.15.4 compatible radio
* USB device support
* NFC Tag support
* Quad-SPI
* Hardware accelerated crypto engine
http://www.nordicsemi.com/eng/Products/nRF52840
JIRA: ZEP-1418
Change-Id: I677c787bb33d02695e057d5dced7e3455b9f6c50
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In preparation for the upcoming nRF52840 support, this patch refactors
the nRF52 series support code to allow for future members of the IC
family to be added, while keeping everything that is common together.
JIRA: ZEP-1418
Change-Id: I4200064ca888d72ba0b8629ce94e4ea6384099ad
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also remove some old cflags referencing directories that do not exist
anymore.
Also replace references to legacy APIs in doxygen documentation of
various functions.
Change-Id: I8fce3d1fe0f4defc44e6eb0ae09a4863e33a39db
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The K64F board has the ENET ethernet driver. Behavior consistently
with other driver selection logic and default the KSDK ethernet driver
on if ETHERNET drivers are enabled.
Change-Id: I2fbed7fdef22d75cf163b61b3e0530ce00d988f0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
And also remove now obsolete ARCH_HAS_TASK_ABORT.
ARC does not need the options either.
Change-Id: Ie52d63178a367ce12b911dacfe2d389f4f75ed2d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
For very constrained systems, like bootloaders.
Only the main thread is available, so a main() function must be
provided. Kernel objects where pending is in play will not behave as
expected, since the main thread cannot pend, it being the only thread in
the system. Usage of objects should be limited to using K_NO_WAIT as the
timeout parameter, effectively polling on the object.
Change-Id: Iae0261daa98bff388dc482797cde69f94e2e95cc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- does not pull in printk(), for potential footprint gain
- does not pull in k_thread_abort(), for single-threaded systems
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Ibc6a198b81a6cd73117d1e85aa05b92a4501a34d
Some kernel operations, like scheduler locking can be optmized out,
since coop threads lock the scheduler by their very nature. Also, the
interrupt exit path for all architecture does not have to do any
rescheduling, again by the nature of non-preemptible threads.
Change-Id: I270e926df3ce46e11d77270330f2f4b463971763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The way the ready thread cache was implemented caused it to not always
be "hot", i.e. there could be some misses, which happened when the
cached thread was taken out of the ready queue. When that happened, it
was not replaced immediately, since doing so could mean that the
replacement might not run because the flow could be interrupted and
another thread could take its place. This was the more conservative
approach that insured that moving a thread to the cache would never be
wasted.
However, this caused two problems:
1. The cache could not be refilled until another thread context-switched
in, since there was no thread in the cache to compare priorities
against.
2. Interrupt exit code would always have to call into C to find what
thread to run when the current thread was not coop and did not have the
scheduler locked. Furthermore, it was possible for this code path to
encounter a cold cache and then it had to find out what thread to run
the long way.
To fix this, filling the cache is now more aggressive, i.e. the next
thread to put in the cache is found even in the case the current cached
thread is context-switched out. This ensures the interrupt exit code is
much faster on the slow path. In addition, since finding the next thread
to run is now always "get it from the cache", which is a simple fetch
from memory (_kernel.ready_q.cache), there is no need to call the more
complex C code.
On the ARM FRDM K64F board, this improvement is seen:
Before:
1- Measure time to switch from ISR back to interrupted task
switching time is 215 tcs = 1791 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 315 tcs = 2625 nsec
After:
1- Measure time to switch from ISR back to interrupted task
switching time is 130 tcs = 1083 nsec
2- Measure time from ISR to executing a different task (rescheduled)
switch time is 225 tcs = 1875 nsec
These are the most dramatic improvements, but most of the numbers
generated by the latency_measure test are improved.
Fixes ZEP-1401.
Change-Id: I2eaac147048b1ec71a93bd0a285e743a39533973
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The Cortex-M3/4 kernel was reserving priorities 0 and 1 for itself, but
was not registering any exception on priority 0. Only reserve priority 0
and use it for SVC and fault exceptions instead of priority 1.
Change-Id: Iff2405e27fd4bed4e49ab90ec2ae984f2c0a83a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Cortex-M0/M0+ do not have other faults than the hard fault at priority
-1, so they do not need to reserve a priority to allow exceptions to
trigger during handling of ISRs.
Change-Id: I479e439f7bcac70b4b2b787bcd744a4c65437e80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows using it in _EXC_PRIO() instead of hardcoding 2 and 3.
Change-Id: I3549be54602643e06823ba63beb6a6992f39f776
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use it to flag which CPUs can do zero latency interrupts, which depend
on being able to lock up to a specific interrupt priority.
Change-Id: I09f71366ea1d05486e38c513a09abc270884879f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When going into DEEP_SLEEP mode, the ARC core now saves
its context. This includes:
- All core registers
- Stack pointer
- Program counter (restored by jumping to the restore code)
The arc reset code now checks if the GPS0 bit 2 is set.
This is similar to the behavior of the x86 core done by
the QMSI bootloader which is setting GPS0 bit 1 in order
to call the restore path instead of cold boot path.
The sample has been adapted in order to support the ARC.
Jira: ZEP-1222
Change-Id: I375f03b16b8a5fd1f07ead55cf7e4947d6290c9f
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
In order to resume the ARC from deep sleep,
the interrupts need to be restored.
The FIRQ stack needs to be saved and restored
when performing sleep operations.
During early initialization, the sp in the 2nd register bank
is made to refer to _firq_stack.
This allows for the FIRQ handler to use its own stack.
Fast Interrupts cannot be used after sleep if this information
is not restored.
This patch adds the suspend and resume functions.
Jira: ZEP-1223
Change-Id: Ic81980f05aee6c1f7b8c46c743f2648c65b29486
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Move interrupt initialization for the ARC to its own
device. The init function for the arc will be only
doing platform specific operations
Jira: ZEP-1288
Change-Id: Icb04c3622890021c65cd24cecf6cafee6c37caf9
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
As flags are modified when entering sleep, add cc to
clobber list.
Jira: ZEP-1408
Change-Id: Ia80bc1c7ddedb9d9963c47108372a90928597c1d
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
The ARG_UNUSED macro is added to avoid compiler warnings.
Change-Id: If0242548849ee5b258bb3fce9fd727b377411343
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add a "memory" clobber to inline asm SVC call to ensure the compiler
does not reorder the instruction relative to other memory accesses.
Issue found by inspect the source code. There is no evidence to
suggest that this bug will manifest for any current ARM target using a
current compiler.
Change-Id: I32b1e5ede02a6dbea02bb8f98729fff1cca1ef2a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Basic interrupt driven driver for the nRF5 onboard temperature sensor.
Change-Id: Id0ac303293b8e8b8285b19bcda31284ee6617105
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Stop using the specific k64 pinmux driver by default and start using the
more generic ksdk pinmux driver instead.
Jira: ZEP-1393
Change-Id: Id65b59518c386e6ba33cfa5c4c5bd541664d2b41
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Following pinmux update for PWM support,
update soc to support this new configuration.
Change-Id: I1126e347ab1ab6b2d830993e548de8f32fa2f8f9
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch adds the boot time Power Management configuration for Beetle
on Zephyr. In particular it defines the states of the peripherals during
sleep and deep sleep and the allowed wakeup sources.
Jira: ZEP-1300
Change-Id: Iad9c0f851771ea60d94bbe5420b7b3ee0743b77e
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add one pin configuration for I2C1 of the STM32L4 series.
Change-Id: Id05d916f2a1126ca439aebcddd8dc9c91015f6fe
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the pin configuration of the USARTs.
Change-Id: Idf7a18b6eab95c61870ad4850c9eafb1fdcab03d
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the clock driver for the STM32L4 series.
Change-Id: Icdf79061f163d8d00187b382d1564422fb875c5b
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the initial SoC support for the STM32L4XX family. The code was
tested on STM32L476RG, but should work on any STM32L4XX currently
available.
This implementation was inspired by the stm32f1x implementation.
Change-Id: Id6670bce0c423617284e8467a9c461531f948e0f
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There was a misalignment between Zephyr UART device numbering and
SoC UART IP. Device "UART_1" was mapped to IP USART_2, which could
be confusing for user.
This commit allows to align "UART_1" to IP USART_1.
Change is propagated to all STM32F103RB/STM32F401RE based boards and
respective pinmux drivers
Change-Id: Ia8099dfeec7b9c0c686c2a58ccb4dbb1a55b6537
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to new serial driver implementation based on STM32Cube we can
remove the USARTX_ADDR defines as they aren't ended anymore
Change-Id: Ia9f9b0a2a63280c0221c789a53ff7338bda17dfb
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to new serial driver implementation based on STM32Cube we can
remove the USARTX_ADDR defines as they aren't ended anymore
Change-Id: Icd5b7995429025c5b54b1a04ca6abb9649ab31c8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube based implementation allows single driver file for
all stm32 based SoCs.
By maximizing code reuse, use of STM32Cube eases new SoCs
porting into Zephyr and provides better maintanability and
maturity.
Change-Id: Ief4b723add3dfc8b2a839683559c5a4c5d5eb837
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch fixes the unused parameter warning found at the
quark_x1000/soc.h file.
Change-Id: I110d7185d8302f95d14efd13060055e7378aea23
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch fixes the unused parameter warning found at the
arch/arm/core/fault.c and arch/arm/soc/st_stm32/stm32f1/soc_gpio.c
files.
Change-Id: I5b3013c1514cff30f4e98feb31169fb28546c534
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Memory access could be reorderd around sleep. Add memory
in clobber list.
Jira: ZEP-1408
Change-Id: I49df2542e0059ba76a262fbda58eb46b86e89bea
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A build error was resulting if CONFIG_ARC_STACK_CHECKING is enabled.
There is a breq that was too far. Adding conditional code to
re-arrange the branching so that it can be done.
See ZEP-1116.
Change-Id: Idea85817b2e05617bbaa4450437aa74c5737e213
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Zephyr is always setting irqs to be level triggered as
required by the core. It is unnecessary to set it to
level again while entering sleep states.
Change-Id: I10f919d619af2e1ab05dc85a67766929b6ae9402
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Too much code might run with a stale icache, before _PrepC(), so move
the invalidation/disabling code earlier. The asm code does the exact
same thing disable_icache() and invalidate_dcache() were doing.
Change-Id: If52f4e4a1de546fb82873c91ead95614a44b106d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
We have no idea what's in the GDT if we don't set it ourself.
Change-Id: I3c2e406370e3ea149252c423d66c97aab95bee17
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Initializing the interrupt stack before initializing (turning off) the
watchdog on the FRDM board pushed the initialization of the watchdog too
late, causing it to fire and reset the board. The board would be kept in
a reboot loop.
Move the initialization of the watchdog earlier: this runs on the main
stack now, instead of the interrupt stack, the same stack the interrupt
stack initalization code runs on.
Change-Id: Ic0006f4f4f4090393571d8355a80dc9390c9fbc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When sleep instruction is called with interrupts enabled, the
interrupt priority threshold bits need to be set. Only interrupts
with equal or higher priority will wake the sleep. Currently it
is set to 0 unintentionally and only priority 0 interrupt can
wake the sleep.
Jira: ZEP-1349
Change-Id: I927e259345cc37c5ecc4dfdcde996dd16443e61b
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The cpu context save function was manipulating stack and
returning to C caller. This can corrupt stack if the calling
function has data saved and it pops before entering deep
sleep. Moved sleep functions into assembly to avoid this.
Jira: ZEP-1345
Change-Id: I8a6d279ec14e42424f764d9ce8cbbef32149fe84
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The nRF5x series SoCs do not implement systick, hence we disable
CORTEX_M_SYSTICK.
Instead, use nRF SoC Series NRF_RTC1 for system clock interfaces.
The kernel system clock interface is implemented using the low
power real time counter NRF_RTC1. NRF_RTC0 is used by the BLE
controller.
In addition, cleanup nRF5x series defconfig to be consistent.
Jira: ZEP-742
Jira: ZEP-1308
Jira: ZEP-1315
Change-id: I0f6cc1836fe0820a65f2cbb02cf5ae7e9eb92e1d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the systick feature optional that can be selected by the SoC.
Change-Id: I4a405640b84daecc17fc1882743d3cafb78ff861
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An IRQ would always register as a ZIL interrupt.
Change-Id: If82a85f472a60512745652aacc7e8b7dfacaa268
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no FIRQ stack in the system in this case, so do not initialize
it.
Change-Id: I8bc068ce43ac8a39909994d8cc01ba0c6a17f4ae
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove NO_METRIC, which is not referenced anywhere anymore.
Change-Id: Ieaedf075af070a13aa3d975fee9b6b332203bfec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The assembler was passed immediate values that are too large for the
limited Cortex-M0 thumb assembly. Load values in registers instead of
using immediate values.
Change-Id: Ib5541c92dea03e0efb1b88ab91eeb408d151a71b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This patch enables REBOOT when RUNTIME_NMI is selected via defconfig
file. This action is required to prevent compilation errors.
Change-Id: I67c18b2860ac34ba8f96e780737b4857a6063ece
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If CORTEX_M_SYSTICK is not selected, do not reference
_timer_int_handler. SoC will need to define a custom system
clock implementation.
Change-Id: I655f3abf66953e434fef69ed16db2d9c2dcc486e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr kernel is unable to compile when CONFIG_RUNTIME_NMI is enabled in
defconfig on ARM's architectures.
This patch addresses the following issues:
* In nmi.c _DefaultHandler() is referencing a function
(_ScbSystemReset()) not defined in Zephyr. This has now been replaced
with sys_arch_reboot.
* nmi.h is included in ASM files and due to the usage of "extern" the
compilation ends with an error. Added the directive _ASMLANGUAGE to
prevent the problem.
Jira: ZEP-1319
Change-Id: I7623ca97523cde04e4c6db40dc332d93ca801928
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Move _thread_base initialization to _init_thread_base(), remove mention
of "nano" in timeouts init and move timeout init to _init_thread_base().
Initialize all base fields via the _init_thread_base in semaphore groups
code.
Change-Id: I05b70b06261f4776bda6d67f358190428d4a954a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the main stack during very early boot so that we can call memset on
the interrupt and FIRQ stacks. Iniitalize the them before one of them is
used for the rest of the pre-kernel initialization.
Change-Id: Ib57856a66273dda9382e08fa91da5a54847b77c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use the main stack during very early boot so that we can call memset on
the interrupt stack. Initialize the interrupt stack before it is used
for the rest of the pre-kernel initialization.
Change-Id: I6fcc9a08678afdb82e83465cda1c7a2a8c849c9b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Same issue as with ARM. ARC can use _Swap() though, because the call to
it is serial, not generating a low-priority exception and interrupts are
locked until the main() thread is context-switched into and the
interrupt stack is released.
Fixes ZEP-1310.
Change-Id: Ie1f27f7ad0502191ca2867b5400d6e0bfb7f0fc6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ARM Cortex-M early boot was using a custom stack at the end of the
SRAM instead of the interrupt stack. This works as long as no static
data that needs a known initial value occupies that stack space. This
has probably not been an issue because the .noinit section is at the
very end of the image, but it was still wrong to use that region of
memory for that initial stack.
To be able to use the interrupt stack during early boot, the stack has
to be released before an interrupt can happen. Since ARM Cortex-M uses
PendSV as a very low priority exception for context switching, if a
device driver installs and enables an interrupt during the PRE_KERNEL
initialization points, an interrupt could take precedence over PendSV
while the initial dummy thread has not yet been context switched of and
thus released the interrupt stack. To address this, rather than using
_Swap() and thus triggering PendSV, the initialization logic switches to
the main stack and branches to _main() directly instead.
Fixes ZEP-1309
Change-Id: If0b62cc66470b45b601e63826b5b3306e6a25ae9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Artifact from microkernel, for handling multiple pending tasks on
nanokernel objects.
Change-Id: I3c2959ea2b87f568736384e6534ce8e275f1098f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
PA10 should use *_PA10_UART1_RX
Change-Id: Ifba4d301d049db1d62ea3a63d4d66f75c88a71a6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous configuration was backwards. From the Intel manual:
"If the segment descriptors in the GDT or an LDT are placed in ROM,
the processor can enter an indefinite loop if software or the
processor attempts to update (write to) the ROM-based segment
descriptors. To prevent this problem, set the accessed bits
for all segment descriptors placed in a ROM. Also, remove
operating-system or executive code that attempts to modify
segment descriptors located in ROM."
Only by some miracle has this not been causing problems.
Change-Id: I0bb915962a1069876d2486473760112102feae7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Prio should be an int, since values are small integers, not a fixed-size
int32_t. It aligns with the prio parameters of the other APIs.
Stack size should be size_t.
Change-Id: Id29751b86c4ad7a7c2a7ffe446c2a96ae83c77bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The bitfield determining the I/O direction already defines the pin
as either input or output, cannot be none or both at the same time
This issue was reported by Coverity
Coverity-CID: 151970
Change-Id: I18d5387139d6834004ba3269c5b54176bdc97ea7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
There was a possible race condition when setting the return value of a
thread that is pending, from an ISR.
A kernel function causes a thread to pend, with the following series of
steps:
- disable interrupts
- move current thread to wait_q
- call _Swap
Depending if running on M3/4 or M0+, _Swap will either issue a svc #0,
or pend PendSV directly. The same problem exists in both cases.
M3/4:
__svc will:
- enable interrupts
- trigger __pendsv
M0+:
_Swap() will enable interrupts.
__pendsv will:
- save register context including PSP into the thread struct
If an interrupt occurs between interrupts being enabled them and
__pendsv saving PSP, and the ISR sets the pending thread's return value,
this will happen:
- sees the thread in a wait_q
- removes it
- makes it ready
- calls _set_thread_return_value
- _set_thread_return_value looks at the thread's saved PSP to poke
the value
In this scenario, PSP hasn't yet been updated by __pendsv so it's a
stale value from the previous context switch, resulting in unpredictable
word on the stack getting set to the return value.
There is no way to fix this issue and still have the return value being
delivered directly in the pending thread's exception stack frame, in the
M0+ case. There will always be a window between the unlocking of
interrupts and PendSV being handled. On M3/4, it could be possible with
the mix of SVC and PendSV, since the exception stack frame is created in
the __svc handler. However, because we want to keep the two
implementations as close as possible, and there were talks of moving
M3/4 to using PendSV only, to save an exception, the approach taken
solves both cases.
The approach taken is similar to the ARC and Nios2 ports, where
there is a field in the thread structure that holds the return value.
_Swap() then loads r0/a1 with that value just before returning.
Fixes ZEP-1289.
Change-Id: Iee7e06fe3f8ded84aff918fd43408c7f589344d9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When a thread dies, at least print the pointer to it, so we can debug
better.
Change-Id: Ief6bbc0c221e2d5271c240a4b73df16413aa5e22
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Most kernel APIs are now ready for inclusion in the API guide.
The APIs largely follow a standard template to provide users
of the API guide with a consistent look-and-feel.
Change-Id: Ib682c31f912e19f5f6d8545d74c5f675b1741058
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This reverts commit
"kernel/arm: add comment about _is_next_thread_current"
and fixes the interrupt locking issue.
The comment would have been right if only reads were done the ready
queue, but that is not the case. It turns out that the comment was written
ignoring the fact that _is_next_thread_current() updates the next thread
cache when fetching the next thread.
Change-Id: I21c9230f85f4f87a6bbf14fd4a9eb7e19b59f8c5
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Though Cortex-M4 could optionally have a floating point unit,
the MCU in the cc3200 in fact does not have an FPU.
Enabling CPU_HAS_FPU caused applications built with CONFIG_FLOAT=y
to crash during an early call to enable_floating_point().
This patch was validated by running microPython, which is one
such application.
Change-Id: I8bfd42c456524e152cbbb983001d9540d93fbe98
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Normally, _is_next_thread_current() must be called with interrupts
locked, but the ARM interrupt exit code does not have to do that. Add
explanation why.
Change-Id: Id383b47a055fdd6fbd5afffa52772e92febde98f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The unified kernel is now the only supported kernel, so this
option is unnessary. Eliminating this option also enables
the removal of some legacy code that is no longer required.
Change-Id: Ibfc339d643c8de16a2ed2009c9b468848b8b4972
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Regardless of the number of interrupt priorities
supported, the exit of the trap handler can check
AUX_IRQ_ACT to see if it interrupted a FIRQ or IRQ.
Change-Id: I0b84d8298d3e6e437c934c01db4535fa8fe29458
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some arduino 101 boards have old boot loader without context
restore boot flow feature. This handler will allow doing deep sleep
in those boards by jumping to the context restore code. This will
be disabled by default and can be optionally enabled by user.
Jira: ZEP-1258
Change-Id: I92e70550fd92c1cac42b3039d667fb0be8cf5bce
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Some bootloaders have power management support to restoer context
upon resume from deep sleep. In such cases, the OS startup code
should call the notification hook. Create Kconfig flags to configure
this option.
Jira: 1257
Change-Id: I9f40c5fa077c2f17dc8e9f11604c3ed17e549ed5
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
_sys_soc_resume hook is over loaded to handle to different
scenarios. It is primarily called to notify exit of kernel idling
after PM operations. It is also used to notify exit from deep sleep.
This is very confusing and also makes the implementation of the
hook function very difficult because of very different conditions
involved in the 2 different use cases. Further, users may not require
either or both use cases depending of their custom boot flow and
power state handling. To simplify, create a separate hook for the
purpose of deep sleep exit notification. Use the existing one to
only notify kernel idling exit after PM operations.
Jira: ZEP-1256
Change-Id: I96350199a0fd37f16590c8ee5302a94a3d71b8ba
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add SoC support for ARM Beetle platform.
Beetle is an ARM Cortex-M3 based SoC used on ARM V2M Beetle Boards.
https://www.arm.com/products/tools/development-boards/versatile-express/beetle_iot_evaluation_platform.php
This patch contains:
* The base SoC platform.
* The clock_init functionality.
* The system wide pin definitions.
* The configuarion for the drivers at SoC level (IRQs, PINs and
Base Addr).
Jira: ZEP-1245
Change-Id: If15675935890711983e5ce37d49732b0462c3ec7
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When waking up from C2LP state, the timer needs
to be reinitialized as we cannot know the time
that we spent in that state.
In order to reschedule the user application, expire it
as soon as we restart.
Change-Id: Id38a0de71e148ae8d9024a36d3983ab57b1e40d2
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Updates x86 floating point support to reflect changes that have
been made in recent months.
* Many, many, many cosmetic changes (mostly revisions to comments).
* Elimination of unnecessary function aliases that were needed
to support the task and fiber versions of certain APIs.
* Elimination of run-time code to enable a thread's "FP regs"
option bit if the "SSE regs" option bit was set. The kernel
now recognizes that the thread is using the FPU as long as
either option bit is set. (If the thread has both option bits
enabled this is the same as if only the "SSE regs" bit is set.)
Change-Id: Ic12abc54b6fa78921749b546d8debf23e7ad232d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Verify the thread priorities are within the bounds when starting a new
thread and when changing the priority of a thread.
Change-Id: I007b3b249e4b80235b6439cbee44cad2f31973bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A race condition would happend if a FIRQ interrupted a
return-from-interrupt from a RIRQ at the wrong moment: if a decision was
already taken which thread to context switch in and the FIRQ woke up
another thread of higher priority, the ready queue would be corrupted.
The solution is to lock interrupts at the moment the interrupt return
code starts looking at the kernel queues. Interrupts do not need to be
unlocked before exiting: the return-from-interrupt (rtie) instruction
will restore the correct interrupt locking state for the thread being
context switched in.
Change-Id: I777665c2faeca7b1f2a77ddd9ee2a520080bae88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The bitwise AND operator was being applied to the boolean expression
"!shared_data->flags" instead of the whole expression because a
parenthesis was lacking.
This bug has been found using Coccinelle using the following spatch,
after finding a similar bug somewhere else in the code base:
@@
expression E1;
expression E2;
@@
- !E1 & E2
+ !(E1 & E2)
No other instance of this defect has been found with this spatch.
Change-Id: I6b9ca092f4015c80ddc83c31ce540a92e67cdb11
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
An implementation to flush multiple d-cache lines has been added
per the top-level cache.h API. ZEP-1153 was opened to express
the need for MORE i-cache and d-cache APIs. For example, the current
cache.h API doesn't provide a means to invalidate d-cache lines
and has nothing for i-cache.
I've also modified some of the i-cache related aux registers to have
better names so that they won't be confused with d-cache.
These changes are for
ZEP-1176.
Change-Id: If4c5410451cc40dcd5618fc871093c8febf7e061
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Symbols now use the K_ prefix which is now standard for the
unified kernel. Legacy support for these symbols is retained
to allow existing applications to build successfully.
Change-Id: I3ff12c96f729b535eecc940502892cbaa52526b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This KSDK flash shim driver supports the device in the FRDM K64F
platform (enabled with this commit).
WARNING: the driver disables the system interrupts for potentially
long periods of time. This is required to avoid Read-While-Write
issues since most platforms run in XIP mode.
For more detailed information see the link below:
http://cache.freescale.com/files/32bit/doc/app_note/AN4695.pdf
Change-Id: I70f8d09080251033ce2f45be0c2eb95c19fded08
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
The uart_k20 serial driver incorrectly assumed that all instances of the
UART peripheral are driven by the system clock, when actually some
instances are driven by the bus clock (which usually runs at half the
system clock). This caused incorrect baud rate calculations for UART
instances driven by the bus clock (UART2-4).
Change-Id: I38041781cdee146912bb5167e7c71d6416b966b5
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This change is required to support unified kernel.
Change-Id: I47bd644239eb3e624c7a5cb456eedad5aca79e8e
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The unified kernel expect the default return value from a _Swap() call
to be set to -EAGAIN by the architecture code. Cortex-M3/M4 does this in
the SVC call handler, and it was missing from the Cortex-M0/M0+ before
pending PendSV.
Change-Id: I3316901186ab409f49043eb4f1972c4b0dd9a4a2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The pinmux configuration is done during board initialization.
This was validated using the following Zephyr apps:
- samples/hello_world
- samples/philosophers
- samples/drivers/uart
- samples/shell
UARTA0 is currently supported.
Change-Id: I85727c622d4d42183cc9f2f8b43d653e245dd17e
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Initial support is for the CC3200 SoC, comprising a network coprocessor
and Cortex-M4 MPU.
This leverages the CC3200 SDK driver peripheral library, installed
separately, or built from ext/hal/.
Jira: ZEP-1109
Change-Id: I508afc8596c165b309a4ec641c39abadc779eea3
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The k64 SoC has multiple instances of many peripherals, but which
instances can actually be used depends upon the board design and pinmux
configuration.
Move all instance-specific default driver configurations from the SoC to
the boards (frdm_k64f and hexiwear_k64). Default driver selection
remains in the SoC (e.g., enable the KSDK I2C driver when I2C is
enabled).
This paves the way to support different driver defaults for the
frdm_k64f and hexiwear_k64 boards, but it does not yet change any of the
default values; it only changes where the default values get set.
Change-Id: Id9ed898762eb400ecefeac91ae4dce66da05622d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds standard prefix to symbolic option that flags a thread
as essential to system operation.
Change-Id: Ia904a81ce343fdd1cd44caaaeae641d822777f9b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A new shared memory has been added to the qmsi bootloader
in order to handle the restore flow and jump to
the restore trap where context is restored.
Add the new entry to the QUARK SE C1000 linker file
and new kconfig options:
- CONFIG_BSP_SHARED_RAM_ADDR to set the address of the
shared memory.
- CONFIG_BSP_SHARED_RAM_SIZE to set the size of the
shared memory.
This is only enabled with CONFIG_SYS_POWER_DEEP_SLEEP.
Jira: ZEP-1046
Change-Id: I35d924a100c5583025aa36a9741428ab51809c57
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Enable HAS_CUBE config flag on stm32f4 family soc.h is updated to
include minimum include files from ext/hal/stm23cube
Change-Id: I35a8c33aab777167ee7029edc1b7a4f6d21fccd8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create HAS_CUBE config flag to control activation of STM32Cube support.
Generate fitting compilation options for STM32Cube in
/ext/hal/stm32cube/Makefile soc.h is updated to include minimum include
files from ext/hal/stm23cube
Change-Id: If58ce0a4fdb7fbf5f171dfe5f1f8eb75126a8313
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In ST CMSIS files, FLASH_BASE does not mean base address of FLASH register
Instead FLASH_R_BASE is used.
stm32f1 clock control driver is updated to be compatible with this naming.
Change-Id: Ic4fb49c60c392e15fd12c69266baf4c686bd343b
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube uses SoC defines made to reflect HW heterogeneity that
should be taken into account by SW.
Aim of this commit is to adapt values used by Zephyr to the same
diversity. This will help create new SoC values only when justified
by a real hardware difference that should be taken into account
by software.
For instance, for SoC stm32f401re following define is used:
*STM32F401xE
Which means:
*Same SW could be used on STM32F401RE and STM32F401CE:
same CONFIG_SOC could be used
*Different SW should be used on STMF401RE and STM32F401RC:
different CONFIG_SOC should be used
This change focuses on stm32f4xx series.
Change-Id: I56ff4d1815d09747cf722385532eb2dcbdf37b44
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube uses SoC defines made to reflect HW heterogeneity
that should be taken into account by SW.
Aim of this commit is to adapt values used by Zephyr to the same
diversity. This will help create new SoC values only when justified
by a real hardware difference that should be taken into account
by software.
For instance, for SoC stm32f103rb following define is used:
*STM32F103xB
Which means:
*Same SW could be used on STM32F103RB and STM32F103VB:
same CONFIG_SOC could be used
*Different SW should be used on STMF103RB and STM32F103R4:
different CONFIG_SOC should be used
This change focuses on stm32f1xx series.
Change-Id: I5ecfaa52952d04421b27b5e74fb71b4fc108b662
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The GPIO and AON GPIO ports are available to both the x86 and ARC
cores, but the driver always assumed only the x86 at the time of
configuring interrupts.
Use the available macros to set the correct values independently of
which core it's being built for.
Jira: ZEP-1030
Change-Id: I310afcc48780fbe1cac9dc3368a6de11bd797fda
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The SoC level peripherals are accesible by both cores, while the SS
ones are only available to the sensor subsystem. Since the ARC core can
make use of both drivers at the same time, we need to be able to
differentiate their configuration values somehow.
Also disable the SoC GPIO for the ARC by default, as it still needs
more changes to be usable.
Jira: ZEP-1030
Change-Id: Ic5415c404ecd32a3e560467b6f5eaa873a515d72
Signed-off-by: Iván Briano <ivan.briano@intel.com>
IRQ numbers differ between x86 and ARC, as well as the bits that need to
be touched in the interrupt routing masks. QMSI abstracts some of it and
for the rest we do have the information needed.
Add a macro to select the right IRQ number based on which core we are
building for.
Change-Id: I3e6680d10a0a23c98777d2831efe6819fcb54162
Signed-off-by: Iván Briano <ivan.briano@intel.com>
There are a number of data sections that are repeated across
all the linker scripts for various architecture. In practice these
don't always get updated and we have had problems with bit-rot.
Consolidate these to make maintenance easier.
x86 linker scripts now follow the same naming convention and we
get rid of a linker-epilog.h that wasn't necessary and whose purpose
has been lost to the mists of time. If applications want to define their
own sections they should be allowed to. Linker scripts for x86 do not
end with .h any more, they are not C header files even though we use
C's preprocessor.
Issue: ZEP-688
Change-Id: I893eb4619969695c1f980efd7c2ec9fa5dad136d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We can derive NUM_REGULAR_IRQ_PRIO_LEVELS by subtracting 1
from CONFIG_IRQ_PRIO_LEVELS if FIRQ is present (which is currently
always the case). If FIRQ is not present, the value will be equal
to CONFIG_IRQ_PRIO_LEVELS since all interrupts will be regular.
Change-Id: Ibefc939e3771bf0adf712127db0d36cb49bf732b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_SCSS_INT is renamed to QM_INTERRUPT_ROUTER;
- every member of QM_INTERRUPT_ROUTER was renamed as well;
- QM_IRQ_* renamed too, mostly added _INT at the end;
- some isr functions were renamed to keep their names consistent;
- build for x86 needs to define QM_LAKEMONT, as QM_SENSOR was for ARC.
Change-Id: I459029ca0d373f6c831e2bb8ebd52402a55994d1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Move common config options one level up to try to simplify the per-board
defconfig
Change-Id: I3d80fa494050634d0f877af2015b01b85df20d1d
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
STM32F401 allows for upto 16 alternate functions on each pin.
Change-Id: Ib1c14fd31abaa2b05a5ab0f7bd1b4a4748f10f84
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implements MCU-specific GPIO input interrupt integration. Added
definition of System configuration controller as well as its needed by
the GPIO code.
The SYSCFG controller is used for system-specific configuration such as:
- remap the type of memory accessible at address 0x00000000
- manage the external interrupt line connection to GPIOs
- configure the I/O compensation cell
Change-Id: Id2ebfbd1b21e77be76406d1cd6cd5d4989e9e2fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Based on the STM32F10x driver. Removing old code as we need to use the
bus number when dealing with 4 possible peripherals.
Change-Id: Id0263aa008e9b039ff9a00339e5622e289ffdf99
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for the STMicroelectronics STM32F4x family in the
STM32 MCU line. Configuration is included for the STM32F401RE MCU.
Acknowledgements to Pawel Wodnicki's earlier submission from February that
was used as a starting point for this port. In the end, we rewrote all of it.
Change-Id: I9797c282ac3c0cc66a63b9d34821de95df537ef6
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The mk64f12 provides RNGA hardware. Follow the implementation pattern
used by various other driver classes and enable the RANDOM KSDK shim
driver if the RANDOM driver is enabled.
Change-Id: I46bdf16cf1c48937011fb1b0e4c292615efd4c95
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
SOC_TI_LM3S6965 and UART_STELLARIS are platform-specific, remove from
arch/arm/defconfig.
Change-Id: I3b37bc2ddfabb1da4e7538b5ab0e553fb2464584
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
STM32F4 requires the alternative function config to be set, so just
initialize that as part of the gpio configure call.
Change-Id: I33a4a8efec59c5ebe7dc3f3580f0dd2bf7ded7f4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
The STM32F1 range all have the independent watchdog, enable the driver
by default if CONFIG_WATCHDOG is enabled.
Change-Id: I3869884dc51c56194367b46007c87f6cee699689
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
All M7 features common to M3/M4 are working. New features like Tightly
Coupled Memory (TCM) are not yet supported.
Change-Id: I5f7b292e70843aec415728f24c973bb003014f4b
Jira: ZEP-977
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Existing code wasn't removing a thread from the kernel's list
of active threads if the thread terminated or aborted. (It did
remove it if the delayed starting of a thread was cancelled.)
Change-Id: Icc97917e33765696480d0e9bf31e882ef555d095
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of unnecessary THREAD_MONITOR_INIT() macro, to be
consistent with the approach taken by _thread_monitor_exit().
Aligns x86 code with the approach used on other architectures.
Revises the associated comments and removes unnecessary
doxygen tags.
Change-Id: Ied1aebcd476afb82f61862b77264efb8a7dc66c9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renames _thread_exit() to _thread_monitoring_exit() to make
its purpose clearer. Revises the associated comments and
removes unnecessary doxygen tags.
Change-Id: I010a328d35d2d79d2a29b9d0b6c02097bb655989
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The baudrate calculation present in set_baudrate() is
causing the UART to emit inital bytes incorrectly, for a
reason currently unknown, but directly related to the fact
that __aeabi_uldivmod is being invoked.
Since the nRF5x Product Specifications do not provide a
standard formula to calculate baudrates and instead list
a predefined set of divisor values, we opt here to use the
official values and remove the attempt at calculating them
manually.
Change-Id: Ic3ff42ea6d065e9a1d26a5350ce5bf5ad661160a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Several platforms utilize a ihex image format. Rather than
duplicating the build bits in everyones makefile, pull it into the
toplevel makefile so we all share it.
Change-Id: I9097b06e7e386a69ce6ab4d4e4d56cc776adfec2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- the interrupt (both regular and fast) now does not do rescheduling
if the current thread is a coop thread or if the scheduler is not locked
- the _nanokernel.flags cache of _current.flags is not used anymore
(could be a source of bugs) and is not needed in the scheduling algo
- there is no 'task' field in the _nanokernel anymore: scheduling routines
call _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- thread initialization initializes new fields in the tcs, and does not
initialize obsolete ones
- nano_private includes nano_internal.h from the unified directory
- The FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- the 'fiber' and 'task' fields of _nanokernel are replaced with an O(1)
ready queue (taken from the microkernel)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
Change-Id: Ib9690173cbc36c36a9ec67e65590b40d758673de
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Still missing a working timer driver, as SysTick is not really available
in this SoC series (enabled to avoid build issues, but not used).
Jira: ZEP-784
Change-Id: Ie1c8e6c5e8955ee7f260ce013f4451f9215f3457
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Integrating the IRQ definitions for both nRF51 and nRF52, and defining
the set of IRQ values that are common to both.
Also switch the controller, uart and clock drivers to use the common
header definitions.
Change-Id: Id6816d7a97720896cfe4df83656fb8b1f8fb01fa
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Not disabling SysTick as it is optional by the spec.
SVC not used as there is no priority-based interrupt masking (only
PendSV is used).
Largely based on a previous work done by Euan Mutch <euan@abelon.com>.
Jira: ZEP-783
Change-Id: I38e29bfcf0624c1aea5f9fd7a74230faa1b59e8b
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
EM7D was recently merged, and one change suggested there was
to remove conditional checks for NSIM. It is OK to have the simulator
use the exact same memory addresses and sizes as would be found on the
board. This submission fixes EM9D and EM11D to be the same -- i.e.
to not have NSIM conditionals.
See ZEP-966.
Change-Id: Ia990ff7bb4b7ff5071af83723ed3d1420fdff012
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The EM7D SOC is similar to EM11D, except it has different sized
iccm and dccm memories, and also has FIRQ with RGF_NUM_BANK==1.
To select this SOC on the board, all dip switches are in the up position.
See ZEP-966.
Change-Id: I864ffe0efdf367de0a8cd58e9c46efd7e401c671
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
For the EM Starterkit, one SOC I will soon be adding is EM7D.
This SOC has FIRQ, but only has one register bank.
Thus the interrupt handling for FIRQ needs to be different
when CONFIG_RGF_NUM_BANKS==1. The handler must instead push
registers onto the stack in the same stack frame layout that RIRQ uses.
This allows for context switch to be easily done since its compatible.
The common interrupt entry point _isr_enter must save r0 before using
it, because in the FIRQ 1-bank case, it would be destroyed otherwise.
So a global variable named saved_r0 has been added for this reason.
The stack cannot be used to save r0, because it first has to determine
whether its FIRQ or RIRQ here. This change has been tested on the
EM Starterkit with EM7D SOC changes -- coming soon. To make the review
easier, these 3 files are submitted first.
Also, exceptions will no longer use the _firq_stack.
This stack is not needed in the 1-bank case, but an exception stack
is needed. I've added a new stack called _exception_stack,
and made it be 512B, which should be enough for one exception.
See ZEP-966
Change-Id: I6f228b840da7c4db440dd1cfef4ae25336c87f0d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Those options are not being used anywhere, so remove them and avoid some
confusion.
Change-Id: Ia3767dbd2432851dfae4b1e996f02ed1b2450505
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Bluetooth controller implementation requires the low power
oscillator for radio time space scheduling and as sleep
clock; the high frequency oscillator as the active clock.
For Nordic Semiconductor's nRF5 Series SoC's select the
NRF Clock peripheral when BLUETOOTH_CONTROLLER is selected
in Kconfig build.
Jira: ZEP-897
Change-id: I6f99e90b3485e757be61e91c749e485dd0cfdaba
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Provide a network driver wrapped around the KSDK ENET and PHY
drivers.
The driver performs one shot PHY setup. There is no support for PHY
disconnect, reconnect or configuration change. The PHY setup,
implement via KSDK contains polled code that can block the
initialization thread for a few seconds.
There is no statistics collection for either normal operation or error
behaviour.
Origin: Original
Change-Id: Ia0f2e89a61348ed949976070353e823c178fcb24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
There is a convention in the soc implementation for other
(non-ethernet) classes of driver that enabling a generic driver has the
effect of enabling the specific flavour of driver required for the
board. Extend this convention such that when ETHERNET is enabled, the
quark_x1000 enables the DW ethernet driver.
Change-Id: I525471d259c9582024cd44d6cc4557260abe6451
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Build breaks when enabling CONFIG_NEWLIB_LIBC because it has its own
sched.h file.
This is a bad symptom of a greater issue: the build system passes many
'-I<path>' options to the compiler, and that allows including header
files by simply specifying their names (when located somewhere else than
<zephyr>/include/) and can cause clashes when several files in different
locations have the same name, like in this case.
Fixes ZEP-1062.
Change-Id: I81d1d69ee6669a609cd0c420b1b8f870d17dcb67
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Builtin might not be available for ARMv6 (Cortex-M0/M0+) depending on
the toolchain used (not available by Zephyr's SDK GCC), so move the
atomic operations selection to the Cortex-M family Kconfig file.
Change-Id: I20a5a0c5fdd2bcff2d304139f5a7e8502fdb1cb3
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
When adding a thread to the ready queue, it is often known at that time
if the thread added will be the next one to run or not. So, instead of
simply updating the ready queues and the bitmask, also cache what that
thread is, so that when the scheduler is invoked, it can simply fetch it
from there. This is only done if there is a thread in the cache, since
the way the cache is updated is by comparing the priorities of the
thread being added and the cached thread.
When a thread is removed from the ready queue, if it is currently the
cached thread, it is also removed from the cache. The cache is not
updated at this time, since this would be a preemptive fetching that
could be overriden before the newly cached thread would even be
scheduled in.
Finally, when a thread is scheduled in, it now becomes the cached thread
since the fact that it is running means that by definition it was the
next one to run.
Doing this can speed up considerably some context switch times,
especially when a thread is preempted by an interrupt and the same
thread is scheduled when the interrupt exits.
Change-Id: I6dc8391cfca566699bb9b217eafe6bc6a063c8bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The unified kernel calls a function (_get_next_ready_thread) to fetch
the next thread to run: it thus must save caller-saved registers that
are expected to hold a value before calling such function.
The callee-saved registers are available after saving them in the
outgoing thread's stack, so use some of those instead to reduce the
number of registers to save before calling _get_next_ready_thread. Also,
save caller-saved registers in callee-saved registers instead of on the
stack to reduce memory accesses.
This issue did not show up previously, probably because
_get_next_ready_thread did not use the regsiters that had to be saved,
but an upcoming optimization to that function stomps on them.
Change-Id: I27dcededace846e623c3870d907f0d4c464173bf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The code density registers are NOT saved on the stack.
This is controlled by bit 13 in AUX_IRQ_CTRL, which didn't even have a symbol
defined for it. I've also added _ARC_V2_AUX_IRQ_CTRL_LP for bit 13.
Change-Id: Ie80853b72bed4e60a5cf1cf0a8c905a3d86180d9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In order to add the EM7D SOC, I will be implementing a version of the FIRQ
interrupt handler that saves and restores registers on the stack when
RGF_NUM_BANKS==1. All other ARC SOCs at this time have RGF_NUM_BANKS==2,
allowing for a faster handler that can use the registers in the 2nd register bank.
But EM7D doesn't have this 2nd bank, hence the need for this new configurable choice.
(See ZEP-966)
Change-Id: Ie089f1f079902552cf279c2cda23ee0805b01eed
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not used anymore as the support for dynamic IRQs was removed by
commit 844e212.
Change-Id: I624bbd777b2dbcbf905cedc61e63cef21e8a0bce
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Move SRAM_BASE_ADDRESS and FLASH_BASE_ADDRESS to Kconfig.soc since
it will most likely be the same values for all STM32 socs.
Change-Id: I682dc441e34155a19a4f90757707008ef299e9d4
Signed-off-by: Fabien Parent <fparent@baylibre.com>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Exception stubs now just push the handler and in some cases a dummy
error code before jumping to the exception handling code, never to
return.
Change-Id: I6a79d9243deb3fc7ccdae003dd0917364c0aa304
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-enabling interrupts before running the ISR must only be done
when CONFIG_NESTED_INTERRUPTS is turned on.
Change-Id: I2c04f2ce08d41cfef5553ee8554a90d1be0e86a3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
commit e57b21c78c ("irq: Use lowest priority not a
hard-coded priority 2") introduce a wrong whitespace,
not complying with coding style. Remove it.
Change-Id: Ie7e48843e5da6cb3417773ef8a57cf9a166c70d6
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In this file was found an assumption about how many
priorities are being used. This is configurable with
CONFIG_NUM_IRQ_PRIO_LEVELS, however, so it should be using that
instead. This line of code changes:
or r3,r3,(1<<(CONFIG_NUM_IRQ_PRIO_LEVELS-1))
so as to use the correct bit to OR.
Change-Id: I8c6297e98b5163aa27460a68b203e8a27d1e2506
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Set _ARC_V2_DEF_IRQ_LEVEL to the last legal priority value, and not 15.
The last legal value is: (CONFIG_NUM_IRQ_PRIO_LEVELS-1).
This is safer because we don't want priorites not configured to be
enabled.
Change-Id: I1689cc00aa7e707a204d16ec17d7f396566e8638
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
No need to create new Kconfig that do exactly the same, just
reuse those from the main QMSI driver.
Change-Id: I965055f36845ac0464e4a383b0d05c3ae35c0015
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CPU manual indicates that 8-byte alignment is sufficient,
not sure why gdt_rom was aligned on a 16-byte boundary.
The null descriptor in the GDT is never looked at by the CPU,
save a few bytes by putting the 6-byte pseudo descriptor there.
Change-Id: I73f26cdeb30a91f8258c88ef960a45812a11d959
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add _arch_irq_is_enabled external interrupt API to find out
if an IRQ is enabled.
Change-id: I8ccbaa6d4640c1ab8369d2d35c01a2cfbb02f6cd
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Do not clear pending IRQ when enabling an IRQ on ARM
architectures. Peripherals and S/W ISRs may be required to
be deferred until they are enabled later and the pended
IRQ should be retained for the ISR to be vectored to when
enabled.
Change-id: I808183018d8a2cc58390a1de3b4797b2bb7c6ec9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The '_timeout' structure is needed by dummy threads so that they can
handle timeouts.
Change-Id: Iefabd6ad93c8e176e95ce4262f5f3544dc90b7d5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not force selection of X86_IAMCU
Jira: ZEP-867
Change-Id: I2ca0bcd73502321e9e6f5a4638c309393da54e43
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quoting the product specification this device contains an "ARM
Cortex-M4 processor with floating-point unit" or, as this would
more normally be expressed an ARM Cortex-M4F.
Update Kconfig accordingly.
Change-Id: I5bd6f17724d0d4aa9aaab9961f12d4e8502c38a5
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Unified kernel does not provide the _thread_arg_t type, but instead uses
void * directly for its thread entry parameters. _thread_entry_t is
typedefed from void * anyway, and only obfuscates the type. So, define
_thread_entry_t to be a function pointer to a function with three void *
parameters, and when the unified kernel becomes the only kernel, all the
_thread_arg_t types will go away.
With this change, IAMCU runs all the tests sysV x86 is able to run as a
unified kernel.
Change-Id: I53c8754629a5a0a114a16a775ff1efc1884496ff
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provide a random driver wrapped around the KSDK RNGA driver.
Origin: Original
Change-Id: I43feeb37d8d5173c7b95af8e80434fb7dc77a83e
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The x86 architecture port is fitted with support for the unified kernel,
namely:
- the interrupt exit code now calls _Swap() if the current
thread is not a coop thread and if the scheduler is not locked
- there is no 'task' fields in the _nanokernel anymore: _Swap()
now calls _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- nano_private includes nano_internal.h from the unified directory
- the FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
- Floating point support.
Note that, in _Swap(), the register holding the thread to be swapped in has
been changed from %ecx to %eax in both the legacy kernel and the unified kernel
to take advantage of the fact that the return value of _get_next_ready_thread()
is stored in %eax, and this avoids moving it to %ecx.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: I4ce2bd47bcdc62034c669b5e889fc0f29480c43b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Loading the _nanokernel address in %edi rather than in %eax allows
calling funtions in _Swap() without having to restore it, since %eax is
used for the return value. %edi is a callee-saved register and does not
have to be restored.
Change-Id: I338086d8e15857e835d5d7487de975791926f869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ARM architecture port is fitted with support for the unified kernel,
namely:
- the interrupt/exception exit code now pends PendSV if the current
thread is not a coop thread and if the scheduler is not locked
- fiber_abort is replaced by k_thread_abort(), which takes a thread ID
as a parameter (i.e. does not only operate on the current thread)
- the _nanokernel.flags cache of _current.flags is not used anymore
(could be a source of bugs) and is not needed in the scheduling algo
- there is no 'task' field in the _nanokernel anymore: PendSV not calls
_get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- thread initialization initializes new fields in the tcs, and does not
initialize obsolete ones
- nano_private includes nano_internal.h from the unified directory
- The FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- the 'fiber' and 'task' fields of _nanokernel are replaced with an O(1)
ready queue (taken from the microkernel)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
Change-Id: I36c03c362bc2908dae064ec67e6b8469fc573983
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They use data that is unavailable to the unified kernel, and are not
used anymore really. For now, only compile them when CONFIG_GDB_INFO=y,
and never enable CONFIG_GDB_INFO when building the unified kernel.
These files should go away when the unified kernel is made the only
kernel type.
Change-Id: I0a2a917dd453ecaae729125008756e0f676df16d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Watchdog timer is enabled after the board reset. It is not used by Zephyr OS,
and having it enabled causes system resets during CPU-intensive operations.
Change-Id: If5583dbd2d2fb2206274467c523d6b5d147f1fbe
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Define symbolic constants for watchdog timer registers.
Provides the necessary interface to configure or disable
the watchdog timer.
Change-Id: I80002a843361569fdd78b725fc3f68e65195d02e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The ARC side should use the same console UART as x86 by default if we
want identical behavior.
Change-Id: I067860581cfd93d97ffad3d8f0bc5591f555e3ce
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a total of 39 IRQs defined at nrf52/soc_irq.h.
Change-Id: Id478fb15a07cfdecaa6cc136730d20017b8752c5
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Quark D2000 and SE based boards (but Arduino 101) use QMSI bootloader
by default. QMSI bootloader sets up GDT in the so-called 'basic flat
model' just like Zephyr does by default.
This patch changes Quark D2000 and SE boards default configuration
so they rely on QMSI bootloader and we don't sets up GDT twice.
Change-Id: Ic6e520148b732bd48c00657c6c8138a8d865faef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Zephyr uses the last priority level for the PendSV exception, but
sharing prio can still be useful on systems with a reduced set of
priorities, like Cortex-M0/M0+.
Change-Id: I767527419dcd8f67c2b406756b9208afd3b96de0
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
_irq_controller_isr_vector_get() now returns -1 if it couldn't
determine which vector was activated.
Issue: ZEP-602
Change-Id: Ib0f5dbc3b68cc5e2c3a23121530e178aede20d06
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change the signal ramp up/down config parameters in i2c driver
module to SoC specific.
Jira: ZEP-753
Change-Id: Ie01f1d890a7133d30ea53eee07f60354734a8571
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a shim layer around the ksdk I2C driver to adapt it to the Zephyr
I2C interface. Currently only supports master mode.
Jira: ZEP-717
Change-Id: I704b8c38e22e456bb9fa4325682b2a354a27a7ba
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Since nrf.h abstracts the differences between the nRF51 and nRF52
architectures and chooses the right headers to include, it is
safer to use that instead of directly including the soc-specific
headers.
Jira: ZEP-702
Change-Id: I0e1758ede48f3422a41d226b0eab008e4ba2c77c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ksdk provides a clock driver, fsl_clock.c, for the K64F and an
example usage of that driver, clock_config.c, for the Freedom board.
See ext/hal/ksdk/devices/MK64F12/
Leverage parts of clock_config.c to configure the clocks (specifically,
the sequence in BOARD_BootClockRUN()), but use the new Kconfig options
to set up the configuration structure. This will allow support for new
boards that may have a different external oscillator frequency or type.
Jira: ZEP-715
Change-Id: I3f0c75e6236f57600cd8b7f06f4482b13026fc10
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Many Kinetis SoCs contain an Oscillator (OSC) module and a Multipurpose
Clock Generator (MCG) module to configure clocks. Adding options to
configure these modules for PLL operation with different external
oscillator frequencies, which can vary across boards. More options may
be added later to support other clocking modes such as FLL.
Jira: ZEP-715
Change-Id: Ia121cc5b464d7e681883507bd756d331a8abd6ef
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The toolchain headers included an abstraction for defining symbol
names in assembly context in the situation where we're using a
DOS-style assembler that automatically prepends an underscore to
symbol names.
We aren't. Zephyr is an ELF platform. None of our toolchains do
this. Nothing sets the "TOOL_PREPENDS_UNDERSCORE" macro from within
the project, and it surely isn't an industry standard. Yank it out.
Now we can write assembler labels in natural syntax, and a few other
things fall out to simplify too.
(NOTE: these headers contain assembly code and will fail checkpatch.
That is an expected false positive.)
Change-Id: Ic89e74422b52fe50b3b7306a0347d7a560259581
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were almost exactly the same and had already started
bit-rotting (note the missing net_l2 section in linker_harvard.ld)
Issue: ZEP-528
Change-Id: I5039a2c1b86c5764a361b268c33ae8b17da1a9e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Defined in all SoCs, but never referenced anywhere. That definition has
been replaced by CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Change-Id: I1801f72a03925717ded6fbfdef22b1993f843461
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
0 should be fine; no need to make this an FIRQ or non-maskable
Change-Id: Ifdf89a72e4864a2c2bbd83752cd814e2cb9aa16e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The GPIO and UART drivers were failing to build due to some
missing soc.h defines.
Change-Id: I6811e3699449da0a61ccc8376a8e11b96ad7a4e5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a Kconfig option to select between the Hard and Soft Float ABIs. We
also default to the Hard Float ABI as this is what older SDK versions
supported.
JIRA: ZEP-555
Change-Id: I2180c98cd7556ab49f5ca9b46b31add2c11bd07b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
QMSI boot loader uses GPS0. power.c should use GPS1 for its
purpose because GPS1 is reserved for PM use. Switched to
use GPS1 instead.
Jira: ZEP-647
Change-Id: I653450cd0b42aa80bef21c8a42f4aa39cdaef2ed
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The K64F SoC initialization previously used macros and structs
custom-defined in Zephyr in order to access peripheral registers.
Refactored it to use CMSIS-style register accesses from the ksdk
instead.
Change-Id: I80975c62de07ec95cf830e99cd5b0abb9623acd0
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The boot initialization and boot process of the sensor sub systems
is now using the new system log macros and updated the Kconfig
variable to be a level rather than a bool.
Change-Id: I098143684f8e7077a525e7fcbc93b42b22d427ac
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Reflects RAM increase that we get with SDK 0.8.2.
Change-Id: I5d7157834e29bb56864e81fedfb9766d5e4a24f8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, exception stubs had to be declared in assembly
language files. Now we have two new APIs to regsiter exception
handlers at C toplevel:
_EXCEPTION_CONNECT_CODE(handler, vector)
_EXCEPTION_CONNECT_NOCODE(handler, vector)
For x86 exceptions that do and do not push error codes onto
the stack respectively.
In addition, it's now no longer necessary to #define around
exception registration. We now use .gnu.linkonce magic such that
the first _EXCEPTION_CONNECT_*() that the linker finds is used
for the specified vector. Applications are free to install their
own exception handlers which will take precedence over default
handlers such as installed by arch/x86/core/fatal.c
Some Makefiles have been adjusted so that the default exception
handlers in arch/x86/core/fatal.c are linked last. The code has
been tested that the right order of precedence is taken for
exceptions overridden in the floating point, gdb debug, or
application code. The asm SYS_NANO_CPU_EXC_CONNECT API has been
removed; it was ill- conceived as it only worked for exceptions
that didn't push error codes. All the asm NANO_CPU_EXC_CONNECT_*
APIs are gone as well in favor of the new _EXCEPTION_CONNNECT_*()
APIs.
CONFIG_EXCEPTION_DEBUG no longer needs to be disabled for test
cases that define their own exception handlers.
Issue: ZEP-203
Change-Id: I782e0143fba832d18cdf4daaa7e47820595fe041
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_SOC_GENERIC_ARC doesn't exist so remove it.
Change-Id: Idecfd27684b5fd83b7b296daa46a1a21a0ae4d95
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Created set of functions that was designed in the original RFC to
contain arch and soc specific code. This makes the interface to
the OS PM infrastructure cleaner and makes it easier to understand
the flow in the sample app. Also it makes code reuse easier across
soc/arch implementations. These are open to change in future if
other means to achieve the same goals are in place.
Jira: ZEP-227 ZEP-225
Change-Id: Ief57871c370341c55009ad4f456b7f71f2c2a3c6
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The interrupt stack wasn't being initialized at boot.
Change-Id: Iec3e770d385643415641e15906c3a53f7c74a2e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Utilize the gcc -print-libgcc-file-name to determine the path to
libgcc.a. Using this also resolve issues if we are building with
floating point and the various ABIs to pickup the right lib.
We can also simply a few Makefiles and remove the need to export
_CROSS_COMPILE_arm_isa.
Change-Id: I293394c921c18fa4984173ba51825d6f9a333697
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Until now, EOI had always been sent out to the APIC with interrupts
unlocked. Depending on timing, there is a race where the next interrupt
on the same line could arrive before _IntExit disables interrupts
and pops context. If this happens consecutively enough times, the
interrupt stack will overflow.
Now we disable interrupts at the beginning of _IntExitWithEoi and they
remain that way until 'iret'.
Change-Id: Ibb28e0db902ff483d7a885389f231ac2d1864657
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Arches now select whether they want to use the GCC built-ins,
their own assembly implementation, or the generic C code.
At the moment, the SDK compilers only support builtins for ARM
and X86. ZEP-557 opened to investigate further.
Change-Id: I53e411b4967d87f737338379bd482bd653f19422
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is at the expense of code size. The QEMU and MAX10
targets have plenty of space so enable it for these boards,
but leave off by default for others.
Change-Id: I93fdb7db14232727e9953b22490d8869ff3b60e7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The comments for INT_ACTIVE and EXC_ACTIVE now refer to
"executing context ..." for all architectures.
Change-Id: Ib868958639a3b30e1814fcaa4d1f0651d3b2561e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When CONFIG_SYS_POWER_DEEP_SLEEP is enabled, the _sys_soc_resume
function is called and the 'ZF' bit from EFLAGS register may be set
to 1. In that case, we end up wrongly jumping into 'copyDataDone'
label and no data is copied from ROM to RAM.
It seems this 'je' instruction is used without any previous comparison
operation which properly sets the ZF flag. Since 'ZF' initial value is
0, we never jump into 'copyDataDone' label. Also, this 'je' instruction
doesn't seem to be really required since, if %ecx is zero, no data will
be copied anyway.
That being said, this patch removes the 'je' instruction since it fixes
the bug described in the first paragraph and it doesn't affect the rest
of the crt0 execution.
Also, removes outdated information about section size and alignment.
Change-Id: Ia062b78247c4059009193a53f879aa1ebe80881d
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The 16550 will now be the default console device.
Change-Id: I92a6b49984b055e7d5f5c97e5192150be0d5c5c7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are not using this core build any more. Users should be using
the provided F core instead.
Change-Id: I2b5266273030c1bd355aafa78733b4077848d115
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch basically reverts patch "QMSI/uart: Use IOAPIC_EDGE instead
of IOAPIC_LEVEL". The issue with lost UART interrupts is fixed with
following patch: "_loapic_isr_vector_get: fix implementation" which is
a proper way.
Change-Id: I07aa168335827b09db7fcb2486b01585648ff5d6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some issues have been noted with nested interrupts on quark SE.
In particular, the wrong vector # being sent to the IOAPIC EOI
register. Now when doing EOI, we lock interrupts so that the act
of reading the current vector being serviced, and sending EOI
to both controllers happens atomically.
Change-Id: Id9ad992740e197bb9d4638764952b04a27c4af61
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The '_sys_soc_resume' symbol is function-type not data-type as declared
in crt0.S. This patch fixes this by using GTEXT macro instead.
Change-Id: Ibe8bcf92ab045bfe908fd2048d046083e773894f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The code expected r10 to be preserved across the call to the
event logger, which wasn't reasonable given that it is caller-
saved.
Change-Id: I694357ea7ee9b410b93b5a0894e8c38c53127363
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having two parallel implementations is a maintenance issue, especially
when some strategically placed #ifdefs will suffice.
We prefer the ASM versions for SYS V, as we need complete control of
the emitted assembly for interrupt handling and context switching.
The SYS V code is far more mature. IAMCU C code has known issues with
-fomit-frame-pointer.
The only difference between the two calling conventions is that the
first three function arguments are provided in eax, edx, ecx instead
of on the stack.
Issue: ZEP-49
Change-Id: I9245e4b0ffbeb6d890a4f08bc8a3a49faa6d8e7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since we started to use UART_IRQ_FLAGS define them also for
quark_d2000 board. Note that we use IOAPIC_LEVEL since this is right
thing to do and the issue with lost interrupts is fixed in
_loapic_isr_vector_get().
Change-Id: Iaed0283bcc01290e420b42ff5d40ce9d99bfc677
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use IOAPIC_EDGE instead of IOAPIC_LEVEL to fix missing interrupts.
During tests it was found that using IOAPIC_LEVEL interrupts for UART at
some points are lost.
Proposed by Calando, Antoine <antoine.calando@intel.com>
Change-Id: I18b20217c4d73fdeaa424bf59d00f6be1ec6ef1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The emulator supports all the integer math instructions and has
the necessary registers for exception debugging.
Change-Id: I55938d9e3a4b9d219f6fee06fe070e860ca71d4b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are necessary to edit the CPU design in QSYS.
These originate from the F core archive supplied by Altera.
Change-Id: Ic03bd8738ae58dc154b5eaef91154fadaa61c491
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This build has support for hardware break/watch points.
Change-Id: Icf8a0d4abc82640eedd8c43322ebecf0ef069974
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer assume pointer sizes are the same between host and
target, and use stdint defintions to size things.
Change-Id: Ie4dc41c60d62931fdb3d1764ade01c16a64d0b54
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
needs to be 0x8000 after .sdata and .sbss sections since
register offsets are 16-bit signed values.
Change-Id: Ia7486d32af81e54a6ebac6be7ec308dfdeafe79e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds Kconfig options CPU_HAS_FPU, FLOAT and FP_SHARING for the arm
architecture.
NOTE: All SOCs in the MK64F12 family have an FPU so that makes it a
convenient location to enable the hidden CPU_HAS_FPU option.
Change-Id: I71771d24f20f52079314bb8db9bf8a0aa827ab41
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Apply the correct compiler options when building for a Cortex-M4
processor that has floating point enabled. Using 'softfp' allows
floating point to be used with existing libraries supplied by the
Zephyr SDK. The 'hard' option would require new libraries to be
shipped with the SDK.
Change-Id: I141c20f54c2241134510888688637930c7b560a2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The caches get initialized on boot and flushed after XIP copy
takes place.
Change-Id: I642a14232835a0cf41e007860f5cdb8a2ade1f50
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use all available ram, cut in half for simulated RAM/ROM
regions. Some larger test cases did not fit in 64K for
non-XIP case.
Change-Id: I12296286ca7efa5bcc1ceef30486c3fe8976811c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Interrupts and context switches are logged. Since this CPU does not
have a power-saving instruction, it never enters a sleep state so
we do not call _sys_k_event_logger_enter_sleep() from anywhere.
Change-Id: Idcef388e93ffea373446997a0f87e93a4db44331
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Interrupts must always be unlocked when coming out of this function
or execution will never leave _power_save() once entered.
Change-Id: Idda9d9be7cfc576a1072afec38000f63ae262a10
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Quark SE USB device (Designware IP) controller driver implements
the low level control routines to deal directly with the hardware.
Only FIFO mode supported.
Change-Id: I086186df017734579f0363ed79effc1481ff32c2
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Enable floating point in the Cortex-M4 processor.
Change-Id: Ibadae12b9197d6486fd5c6a3d4e177fa9e1c71bc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Saves and loads the non-volatile FP registers (s16-s31) when switching
between threads.
Change-Id: Ib3190452d9a70d722032ac83176eb4fbb92aca3d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the preemptive floating point registers to the ARM's thread
control structure.
Change-Id: I65fbee6303091ce0658bbc442c4707d306b68e92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the exception stack frame structure to include floating point
registers.
Change-Id: I0fef784cf4d91dda245180abd75bfd9221825fba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
at91sam3 supposed to go to Sleep mode and stop the CPU clock
(HCLK). It leads to JTAG problems. In order to be able to use
JTAG, we need to keep CPU clock on. This is achieved by
switching to Wait mode and keeping external main clock.
Since Wait mode switches off automatically Fast RC Oscillator,
but keeps external clock untouched.
Change-Id: Ife37a7691c3cbdf434e560725a71d419adafe054
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
We are not going to handle unimplemented math instruction
exceptions at runtime. Remove remaining comments and exports
related to this. We don't need to leave a gap in the exception
stack frame for it either.
Change-Id: I4f1f3980a0e43bbf6f2f7488a9182f7acb06be05
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Before we were hard-coding them in the assembly file. Makes it
easier to alter the layout of the struct.
Change-Id: I619dc67c68ff87fe60de429a69b2f604292d270c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The faulting instruction was off by 4 bytes and we weren't printing
the exception cause code properly.
Change-Id: I86f4320c7be43dca96940186def56aa5e47bc49f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We want to pass along the stack pointer, not dereference it.
Change-Id: I554eff316bffe50654942746e7960b561abb413b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Pulled from the ARC implementation. Tested via
test_obj_tracing.
Change-Id: I858e89cc9187f99539b362ade8098b3606d31464
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The extra and redundant -serial was casuing issues, remove.
Pass -nographic to work around issues with the experimental QEMU
builds.
Change-Id: I3102fe026a56781d5c4fb20acaa519af368f8a41
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unnecessary and generates build errors for microkernel.
Change-Id: I678f44aa2b68c8f8954c78e7828e534f0c1f4215
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's all RAM, but we pretend the range 0x410000 - 0x420000
is the "ROM" region, and stuff gets copied into RAM starting
at 0x400000.
Change-Id: Idf6bd603e2552593f588cf6130ee4da946bcf5a3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nios II CPUs vary in configuration on whether they support
'mul', 'mulx', and 'div' family of instructions. The compiler
can be told to use GCC integer library routines instead if
needed.
Ideally we would just pull the configuration out of system.h,
but pulling include file #defines into the Make environment
will involve some build system work that is best left to a
later improvement.
We've decided to take this build-time approach rather than
handle unimplemented instruction exceptions, so remove the
hook in exception.S
Change-Id: I05be0d5ed4c1a49b23dca1550ee66fd5891044d2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the CPU lacks certain features the only writable bit in the
status register is the PIE bit, so just write the saved value back.
Change-Id: I91537ff640aa9977d19587c4b0ae414028752341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No longer necessary as all the stubs which didn't use their
parameters have now been implemented.
Change-Id: I0ab3f024431426fbdac6d17de21e9c7338879f6e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The return value of _Swap() is often treated as a "don't care" value and thus
often ignored. However, there are cases when it is desirable to have a
meaningful return value. This meaningful value can be assigned via
fiberRtnValueSet(). To that end, a new field has been added to the coop
register struct to store this value for when _Swap() needs to return that
meaningful value.
Change-Id: Ic4967fa7d602850c09ebde18e8bfd4c97cda9ec8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For this implementation, the presence of a value in global
_offload_routine signifies to the exception code that we should
enter the IRQ handling code even if there are no bits enabled
in ipending. The 'trap' instruction gets us into the exception
handling code.
Change-Id: Iac96adba0eaf24b54ac28678a31c26517867a4d2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We check to see if the stack pointer is somwhere on the
interrupt stack.
Change-Id: Ic9d21e9f03476b9c8955c44cbfa2e61dd1daed22
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Required by microkernel, currently does nothing.
Change-Id: I256886e3a52817d9216599bbf5691bc27c1d0ad8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per Altera these files for the /F core are freely distributable.
README included with instructions and links to necessary software.
Origin: Altera
Change-Id: I58c0dbcb5a2b11f0845d4e390e6aa0020d8b3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a workaround until we can modify the kernel to pull this
value out of system.h instead of Kconfig.
Change-Id: Iaafa9003d2bbcb5b38a050c371466a206f716ae7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Supports Internal Interrupt Controller only for now; EIC
supoort tracked in ZEP-258.
Change-Id: I2d9c5180e61c06b377fce4bda8a59042b68d58f2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With this code we can successfully boot and context switch into
the main thread. Nanokernel hello_world has the expected
"Hello World!" string in the RAM console.
Change-Id: I56335d992f5a7cbb12d9e4c02d1cc23ea28ae6ef
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If XIP is turned on, only hardware breakpoints may be used, and
code cannot be loaded onto the device with nios2-download
or GDB 'load' command. RAM-constrained applications are free to
enable this if they need to.
Change-Id: Iee2d41f71f7ca2bc599801cf3cf0fac680273e51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When an image is sent over the wire with the GDB 'load' command,
it tries to start execution from the __start symbol, which needs to
be in RAM. Since the reset vector is in ROM, name it something else.
Change-Id: Id0bbfa76db9a8a81bd7ff20be3f2baec81eae15e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kconfig doesn't enforce any kind of alignment when specifying the
ISR stack size. Perform the assembly equivalent of STACK_ROUND_DOWN.
Change-Id: Ib7fb72ff7db8a3aa20ec6d0c59a03aa8227f6671
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_INIT_STACKS should initialize all stack regions
with 0xaa. Make sure the initial interrupt stack gets this
as well. Take care not to exceed the bounds of the array
if it is not 4-byte aligned.
Change-Id: Ib23329ac84a5a8515272be2944f948e8faba65b3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This core has extra debugging features useful for this bring-up
exercise.
Change-Id: I619bc8768acb1d9be8699a6e238168f47e605f3d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add hidden configuration HAS_KSDK for SoCs to select if they have
support in the ksdk.
Change-Id: Ia4cd11901bc26d21a3bdfad6236d66656bb292cb
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Use a kbuild trick to force built-in.o to get built even if there isn't
any code so we can link properly. This is cleaner than keeping around
empty files that don't do anything.
Change-Id: I4214d21104fe5f49613fa5697c8116b0e8c8aa50
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was a reference to SOC_FAMILY_NRF5 which was not use by anyone
else and it seemes like it was a typo, where the right reference was
to symbol SOC_NRF5. However, the right fix is to move both sites to
use SOC_FAMILY_NRF5 *and* fix the SOC_SERIES to be only nrf52,
otherwise it causes path duplication and the build fails.
This was also causing documentation warnings that are thus killed.
Change-Id: I92e74a6158f02df43e6e857df8f1e67bcfdd9551
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Change the LOAPIC timer IRQ number to 10. It should not
be 0.
Change-Id: I156286d0e3b903cca07cc3f87804b145aacaf117
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The ReST parser dislikes enumerations with no empty lines in
between. Whatever.
Change-Id: I480c08fe5b69f0d0f3ebfacdc64fc9e3ec94da21
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
No code uses it and it being undefined anywhere generates a
documentation warning.
Change-Id: I09de2e58edf82e7fb9780a5dea98a282502436b6
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The KSDK device header files require a preprocessor macro that defines
the part number string (e.g., MK64FN1M0VMD12). Create a hidden Kconfig
option to hold the part number string, and hidden Kconfig options that
the board Kconfig will use to select the specific part number.
Change-Id: I612e785026261e425b47b5b7fae0c65b4f94b30b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get these out of system.h instead. A clause in libc-hooks.c
for newlib added since we don't get RAM size from
CONFIG_SRAM_BASE_ADDRESS.
Change-Id: Ic35113395b951f625e8e29658afe19c525037964
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We will require 6 variables to be defined by SOC-specific
linker script; these values in turn can be pulled from
defines in layout.h.
To help position code correctly we define two new ELF sections
for this arch, 'reset' and 'exceptions'.
Change-Id: Idffbd53895945b7d0ec0aac281e5bf7c85b4b2c2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nios II does not have a power saving instruction, so there is nothing
to really do here other than ensure that interrupts are in the correct
state when leaving nano_cpu_atomic_idle().
Change-Id: I664c7542dc2fc1795a453d35e183a737dcb20c38
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For the moment, NIOS2_CPU_SOF must be set with the path to the
CPU configuration. We are checking with Altera on whether we
can directly check in the binary to the source tree.
These scripts depend on tools provided by the Altera Quartus
Prime Lite Edition. This is available for free but requires
registration on Altera's website to obtain.
Change-Id: Ia6cb6c9e43c3e141807a887cb25c47b370a7d8e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Altera tools for creating .pof files for flashing onto their
FPGAs require UFM data to be in this special format. Extend
the current 'all' and 'zephyr' targets to additionally create
this .hex file using objcopy, with the same exclusions as the
existing rule for .bin files.
Change-Id: I75293fba47536545359f817a1f2c1ae905b9d25c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
__start is the CPU's reset vector. In a typical Nios II configuration,
the exception vector is 0x20 bytes after the reset vector, severely
constraining the amount of code that can go in here.
Split this into __start and __text_start. The only thing that __start
really need to do is init the instruction cache and jump into
__text_start.
JIRA IDs placed in comments for missing items.
Change-Id: I3c6b8ed65e8fcf6b6a735b80cf007d0180599230
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Linker scripts for Nios II will also need these headers as it
specifies the device's physical layout and various important
vector addresses.
Change-Id: Ie9efaf19e53d2493eed7b9783052393d7ea9dd0f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Include nrf.h instead of directly using the specific header
required. This will be useful in the future when additional
Nordic ICs are supported.
JIRA: ZEP-377
Change-Id: I7a7257b0aaa5fa0a0d202322c366efbdd1d84458
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Translate CONFIG_SOC_SERIES_NRF52X to NRF52, which is the macro
expected by the Nordic MDK headers.
JIRA: ZEP-377
Change-Id: Ic846e4cddf8146ae9d96bc98d4b12311552dc4f6
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There are a few problems with the code being repaired here.
1. A seti was used to re-enable all interrupts, even though the
thread being switched to may have had certain interrupt priorities masked.
2. saved status32 already has SC bit if thats wanted, so its ok to just
restore status32 as-is w/o needing to and off anything.
3. the code is difficult to write using kflag and seti because as you
restore registers, there aren't any to use. But we can exploit a
trick where we pretend an interrupt has occured by setting a bit in
AUX_IRQ_ACT, and then use RTIE instruction to restore status32
atomically with branching to return address. Something about the way
this code was written was causing stack corruptings and crashes in an
application that uses a high rate of both FIRQ and Regular interrupts.
Change-Id: Ia7166d51f0e750c07832ab115b7151ce37ee0278
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Since firq utilizes a 2nd register bank, and since all of those
many GPRs can be used, the strategy here is to save extra registers,
such as lp_count, lp_start, lp_end into callee saved registers.
These registers are safe to use because the C-ABI followed by the
compiler will cause these to be spilled to the stack if a C function
wants to use them. By selecting upper GPRs, r23-r25, it is very unlikely
the compiler will spill them. This improvement, therefore, can avoid a
d-cache miss since we are avoding memory altogether when saving these.
The struct firq_regs is no longer needed.
Change-Id: I7c0d061908a90376da7a0101b62e804647a20443
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Generate kernel image in Intel Hex format when building for the nRF52.
Remove the additional step from the board doc file.
Change-Id: I619496f64037c2a0ac459ae05e549e01458e0f71
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
It was found that the test latency_measure, when compiled
for microkernel, would fail on the ARC. This because the
trap handler, used by irq_offload, wasn't supporting thread switching.
This submission adds the code to do that, and the code size is
bigger only when CONFIG_MICROKERNEL is defined.
To keep code a bit smaller, there is a trick exploited here where
the AE bit is cleared in the STATUS32 register and in AUX_IRQ_ACT,
bit 1 is set, to make it appear as if the machine has interrupted
at priority 1 level. It then can jump into some common interrupt
exit code for regular interrupts and perform an RTIE instruction
to switch into the new thread.
test/latency_measure/microkernel now passes.
Change-Id: I1872a80bb09a259814540567f51721203201679a
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Moved setting of specific Cortex-M compiler flags in each SoC directory
unify setting them in the arch/arm/soc Makefile.
Add flags for Cortex M0, M0+, M1, M3, M4, and M7. However only
CONFIG_CPU_CORTEX_M3 and CONFIG_CPU_CORTEX_M4 are supported at this time
As part of this change converted Kbuild files for some SoCs into
Makefiles as the Makefiles would be empty otherwise.
Change-Id: Ie4e0178b141ca761ec482a610ae50e94fe58070f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a soc-cflags, soc-cxxflags, and soc-aflags as a means for
SoC specific compiler flags to be set without manipulating Kbuild
options directly.
Change-Id: I2c8f5019fb237429e59717ef96bd4251a61dc1a5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For some security scenarios the GDT may already be setup and locked,
in which case the kernel trying to set it again could lead to problems.
Change-Id: I727c1d213479f46a4bb6f0c04a9096131e10b3e7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The .nd on a branch is WRONG if its an unconditional branch. Not needed.
On conditional branches its a compiler feature that is not yet functional
with ARC targets. Typical code for this compiler can use .d to put
something in the delay slot of an instruction, but using .nd is probably
never wanted.
Change-Id: If1017c468e6e7af269ea73daeb4bc223dcc0059f
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add missing Kconfig files and connections to expose Kconfig options
in ext/ directories. Fixup QMSI to only be exposed on platforms that
utilize it.
Change-Id: I6c6c5011b2bf2966f65aa8279dc594a244821956
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ARC CPU comes up from reset with i-cache enabled.
It can have garbage in it from a previous run.
The fix is to check the build register for the i-cache, and if its
present, invalidate it fully, and then disable it.
_icache_setup() is called later to turn it on.
Change-Id: I26fae915153841c61e9530d5af2ddb9d0553275b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
EM11D is a ARC CPU configuration that can be selected for the
ARC EM Starter Kit. The board support for this board will be
submitted separately to expidite review.
Change-Id: Ifc4d48e1f5e01d44d1706e6426bd3b2d77ebe2f8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
EM9D is a ARC CPU configuration that can be selected for the
ARC EM Starter Kit. The board support for this board will be
submitted separately to expidite review.
Change-Id: I2c85bdab6ea7bfb257e94e4c72b11b4568dbac19
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Move away from native driver and use the UART driver provided
by QMSI.
All peripherals on Quark MCUs will use QMSI drivers developed
specifically for Quark and optimized for this MCU line.
Change-Id: If4e27f38736849ea3e12c269886e2a03d957b671
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: Icd301b6c044280b5b25d719b6dcc16d556a2ea8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: I1340ba8930fc8676f7b706540a105250ce3e51b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: I1776178ad6fb984d6e293dbfa8bb1d718e4c2566
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
My boss is asking me to add "all rights reserved" to synopsys banners.
Change-Id: Id74bf3cd0be6bc3159a8b687a37eb11fa3a49f3e
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fixes a bug in _ExcEntSetupDone wherein the return address to the
exception stub was accidentally changed to point to the TCS of the
interrupted thread.
Jira: ZEP-378
Change-Id: I0e502649c49c35ba8b2457016ede4a6b586da3fb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When using the Synopsys DesignWare Synchronous Serial Interface (SSI),
the FIFO depth can vary from 2-256, depending upon how this module is built.
For quark_se_ss, it was using a depth of 8. For EM Starterkit, it will be
32. Adding this now as a configurable option. A larger FIFO really helps
reduce SPI interrupts.
Change-Id: Id2bc8470bfc08ab447d38b89c7904cff010c63bd
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In fault_s.S, changing the word "save" to "safe".
Change-Id: Ia997082a62bf287f09a72b7f0a00d506bd982770
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
We had wrong logic and confusing config options for debugging
Quark SE sensor subsystem. The new option will be used for GDB
debugging. The existing DEBUG option will be used for printing
additional messages on the screen while booting the sensor
sub-system.
Change-Id: Ia54d22e872edafe531ccde271e7504fe9c48a73a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I962ce36b7e2361ea77ae4178bb7c86c19a241c4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I7688ca523915e3fa8a1d28dea7a1d84a66b39d56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some ARC targets can have a data-cache. Although there is no special
instruction to clear exceptions during early init, it is necessary to
invalidate the d-cache BEFORE any data is fetched. The ARC on arduino 101
doesn't have d-cache, and will thus skip this d-cache invalidate.
Also, it is important to set the vector table base register to point to
the interrupt vector table EARLY, so that if an exception is encountered,
the correct vector table is found. Set this base only if it is found to be
different from the one compiled in to the code.
These initialization steps assure that proper exception handling
is in place during early init.
Change-Id: Ie8b5928e5813e104680a6d6510c85d32dc8ed8f3
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The aux register named _ARC_V2_I_CACHE_BUILD can be read
to determine if the ARC has an i-cache. If it does not,
don't attempt to initialize it because this would cause an exception.
Change-Id: I3ff519befcc5ebb7745b58401f12cf3015a9e2e9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The lr and sr instructions cause a pipeline bubble. There is an efficiency
to be gained if pairs of lr or sr instructions are done right next to
each other. This can avoid some stall cycles.
Also, r14 and r15 can be used with isa-16 instructions.
Change-Id: I4165365b49da910db31e0699a1a6e47114962942
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC SOC implementations will need CONFIG_HARVARD so as to
select a different initial stack pointer (one at the top of DCCM memory),
and also to select a different linker command file that uses
ICCM and DCCM. Quark_se_ss will have HARVARD equal to n.
Change-Id: Idb7c4126866c9604e1924200ad5fdd2bc9d28269
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By using isa-16 instructions, a bit of code-size can be saved,
and code can be a little faster.
Change-Id: I0567d8274372748f579610e2bd4236ce52c5d6c8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Now matches kernel/nanokernel/include/nano_internal.h.
Change-Id: I4dbbf50aa05c55de42100a6896fe0fa3b26955ec
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
BSP builds for Nios II generate a linker.h and system.h which reflects
the configuration for that CPU. This can vary depending on how the CPU
is wired up in QSYS, so it needs to be at the SOC level--we essentially
treat any given CPU configuration as a SOC in Zephyr build terms.
Include these files from <arch/cpu.h>.
Change-Id: I12f76600107fec1a14a2f9cb82b0f55915ec03a6
Origin: Altera Quartus tools, machine generated
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ZEP-252 will handle implementation of the code here.
Change-Id: I3e9a6c7cdf2d5a3b0240317b772628fead528095
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At the moment this just jumps into prep_c, with comments left
on other things that need to be done. Having this here ensures that
the early boot code isn't discarded by gc-sections.
vector_table.c removed, it isn't the right approach for this CPU.
Proper method for initializing reset and exception vectors still
being investigated.
Change-Id: Id7965c671f1a55c42ecfb65119497405a646bec4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Avoids confusion with .gitignore rules, which were inadequate to
cover all the places where these files are found. At least in
VIM, these files are now syntax highlighted correctly.
Change-Id: I23810b0ed34129320cc2760e19ed1a610afe039e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Code size can be reduced by replacing ld and st
with ld_s and st_s (if target registers are r0-r3).
Change-Id: Ia70f0aff07fe41a0cfeff2d59dcdadf7c88e1ae8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
code-size optimization to use small-variant loads/stores with %r13w
Change-Id: Ic9b2b7744f7d465bccb1e59f64e621985ae7d04d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
There is a BUG here in that the alias for __start was
aliased to the start of the vector table. Yet, on ARC CPUs,
the vector table CANNOT be the entry point, because there
is no code in a vector table. Only addresses appear in each vector.
Thus, the reset vector, at offset 0 in this table, is a raw address.
The top Makefile in zephyr sets the lable __start to be the entry point
like this: -e __start. Debuggers, for example, use this entry point
to know where the first line of code is.
Also, in KConfig, there were duplicate NSIM blocks. One has been
removed.
Change-Id: I480be7d338a8b45b8ea6ef3f55ac2e6c43829452
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fibers initialize this back pointer to NULL as they are (by definition)
not microkernel tasks. Microkernel tasks initialize it to their
corresponding 'ktask_t'.
However for nanokernel systems, the back pointer is always NULL. This
is because there is only one task in a nanokernel system (the background
task) and it can not pend on a nanokernel object--it must poll.
Change-Id: I9840fecc44224bef63d09d587d703720cf33ad57
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a back pointer to the microkernel task to the TCS when
configured for a microkernel. This is a necessary prerequisite
to support microkernel tasks pending on nanokernel objects.
Change-Id: Ia62f9cf482ca20b008772dad80cbfd6acb6f5b7a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We really should have more faith in the compiler, it generates
code to implement this exactly like the arch-specific assembly
versions, and on ARM is actually 4 bytes shorter.
FUNC_NO_FP used to disable the usual C preamble to update the
frame/stack pointers, which is how the sizes are still the same
or less. It's debatable how useful the occasional use of
FUNC_NO_FP is in practice since it hinders debugging and in a
production build frame pointers should be globally disabled, but
we can address that later.
Change-Id: I6c4b64ab3e3a9b6f91d52fa8c92e6e79a986fc77
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I am working on porting Zephyr to ARC EM Starterkit. This board has ARC
CPUs with ICCM memories. On quark_se_ss ICCM is missing and ignored.
Change-Id: Ic49fc8ef3e6ad879ffc673b8baf34dd467f76c04
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These are for any Nios II at this stage of bring-up.
Change-Id: Ie4d0c80df164f81f6615ac35d3f42235b04870f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
The UART console init should be done after UART init. So it can be
folded into general UART init, thus one fewer SYS_INIT().
Change-Id: Ifb18c5308dfef790325e6bff5bc7b5976fcd421e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The clkInit() is always called so this can be inlined.
This saves 32 bytes of ROM space compared to non-inlined version.
Change-Id: I2cb6d02c0996acad16029be243f6059183938089
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The clock_init() is always called so this can be inlined.
This saves 32 bytes of ROM space compared to non-inlined version.
Change-Id: I1b95142da4c22f4b7fc7f7f6210503d90cf65cc9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The arch names and the directories are the same, make it so we
don't have to keep appending stuff to this file as new arches
are defined.
Change-Id: I640526f5cb83fe34f5af14b62e5d06295a4912b0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The files soc_config.c and soc_gpio.c use errno code so they should
include errno.h.
Change-Id: I94237aa294701cc71ed17ea42eca9d8073d4ae47
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of defining the output format in the toolchain environment
setup, define this per SoC that supports the ABI.
This will allow us to directly referencing an installed toolchain
without the need for declaring ZEPHYR_GCC_VARIANT
Change-Id: Icd1a7a21acbf075a51854fb2ebb3ef06788ce9b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For Quark D2000 we use QMSI drivers, so the initialisation code is no
longer needed.
Change-Id: I22aaa35288e230c455a19b9e67dc6cfb7dc0ff12
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
QMSI defines all the registers of the SoC and other values in
qm_soc_regs.h, so cleanup soc.h and rely on the data from the BSP
contained in qm_soc_regs.h.
Change-Id: I672925cf1c0144a9ed64073ea289c691285a8082
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It was not possible to add directories under an SoC family
because of the direct call to Makefile in the SoC series from the
architecture level.
While we have SoC still using the old structure, add a conditional
to still support old structure and allow Makefiles directly under
an SoC family directory.
This is useful for adding drivers and BSP files common to one family.
Change-Id: I85dc8341523b41949de91d78675153ce0baa5aac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use SOC_FAMILY and SOC_SERIES to identify soc families and series
and to point to the correct linker files and files related to a
specific SoC.
Change-Id: I8b1a7339f37d6ea4161d03073d36557a40c0b4a6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add additional layers when defining SoCs to allow reuse among SoCs
of the same family and architecture.
The Board is the first location where we search for a linker.cmd file,
if not found we look for the linker file in
arch/<arch>/soc/<family>/<series>
Change-Id: I51d5e9a056220d0bd2ae0fa31474ffe63568e698
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SoC family/series and reoganise the structure to follow new
hierarchy.
Change-Id: I8637f1487a8287a6614ce6636cd018cf342fec95
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SOC_SERIES_* for naming SoCs with similar features and architectures
with the goal of code reuse. The Series in the config variable should avoid
name collisions and clearly denote the relationships within an SoC family.
Change-Id: I7a98542f96b5d5dc3acc23782c4d45f98cceb599
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
GDB server needs ownership of some exceptions to display information when
taking a fatal exception (DIVIDE_ERROR, PAGE_FAULT).
Introduce a Kconfig option that can work for any debugger.
Change-Id: I39aef22a820543a7fe9ac333b487592946abc0f3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The GDB server implements a set of GDB commands, such as read/write
memory, read/write registers, connect/detach, breakpoints, single-step,
continue. It is not OS-aware, and thus provides a 'system-level'
debugging environment, where the system stops when debugging (such as
handling a breakpoint or single-stepping).
It currently only works over a serial line, taking over the
uart_console. If target code prints over the console, the GDB server
intecepts them and does not send the characters directly over the serial
line, but rather wraps them in a packet handled by the GDB client.
Change-Id: Ic4b82e81b5a575831c01af7b476767234fbf74f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce an x86 interrupt stack frame that contains more information
than the non-debug one, namely the caller-saved GPRs, as well as an API
to retrieve it. Able to handle nested interrupts stack frames.
Change-Id: If182aaa2f34e4714b16ca65ff79da63b72d962f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Allow a debug server such a GDB to take control when a fatal error
occurs. The debug server simply has to define a _debug_fatal_hook()
function that will override the weak function installed by default.
Change-Id: Ib9dca5755868f747b697fa3178e09109f1eedb07
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Quark flash sub-driver. It is based on the QMSI driver.
In order to enable this driver, the following options
must be set.
CONFIG_QMSI_DRIVERS
CONFIG_QMSI_INSTALL_PATH
CONFIG_FLASH
CONFIG_SOC_FLASH_QMSI
Origin: Original
Change-Id: Iffbea3b17624c755e367677b76d7216c2fba2ca1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The D2000 CRB is similar to the Arduino 101 (at least as GPIO is
concerned). Add support for using the GPIO controller without QMSI
libraries.
Change-Id: I001da05c9a9d5771b2ec678a9d4a91c44db05289
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib483419be5199b52cf281b4b106cd8a3be95b7be
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove UART default configuration to make it default UART_0. This
makes default working fine with Nordic BLE chip using H:4 driver.
Change-Id: Icb6d9f068b586bbf04694bc77ed968211de94c8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allow to connect Nordic Devkit or dongle to qemu. Simple
configuration for the current NBLE firmware is following:
Connect Nordic board to PC, ttyACMX gets created.
$ socat -x /dev/ttyACMX,raw,b1000000 unix-listen:/tmp/bt-server-bredr
Build app with prj_nble.conf and run with make qemu
Change-Id: I354644b465ad09ab0ca62fbd97f15d9bb3c87d6a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
This also separates IRQ_PRI into one for DW and one
for QMSI, to follow the convention of every other
drivers.
Change-Id: I338f819f71c18fa9e17015e8a588a3d0207350c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ic73783189db57059d2b7f3727e4802e1b2e27931
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ifd65097a65f80539cac073f95aadc2d8e42efb9f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ifdbb5e3a997795ef577350d88f8cb06877eb6463
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib8158f00a6c6616360ddbcf63981f1a85911c1b9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
GCC enables unaligned memory access for ARMv6 and above.
Once unaligned memory access is allowed, there's no need
for the unaligned memory access trap.
The change prevents the situation when the compiler
generates code that uses unaligned memory access, but
the CPU generates an exception when this code runs.
Change-Id: Id33f2264c631772e5c561e76fb579d8b7bc26e1e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This patch extends the i2c shim driver so it supports the 'default
configuration' infrastructure which enables the user to specify a
default configuration for the I2C device. The default configuration
is set during driver initialization.
This patch also changes Quark SE and D2000 Kconfig.defconfig files so
the i2c default configuration is set to '0x12' which means standard
bus speed, 7-bit addressing and master mode. This is the same value
used when DW driver is selected, by the way.
Change-Id: I06e0dc3c29e8da2f3317db5bef285177f2e92c9a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Remove those kconfig options that are SoC specific, and should not be
configurable via kconfig.
Change-Id: Ia62888838877da4627419bd36c261d5254761acd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It wasn't correct to add the size of the long jump instruction
as it *replaces* a short jump instead of just being after it.
So redefine this to be the difference in size between these
two instructions.
Change-Id: I65be2afab19d9cd8b096551acde0156f0503df87
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These interrupt settings are SOC specific. So, move them to the
SOC level of Kconfig.
As IRQ priority is fixed in D2000, changed the value to 0 to
make it consistent with what other shim drivers are using.
Change-Id: Id20bed46c478a7555ae976e3a3063ba2cb099788
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This is hardware design so there is no need for it to be
configurable in kconfig.
Change-Id: Iff162f330aae8ef9a7139b6e7ed9bfa87f26189a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need to re-define CONFIG_UART_CONSOLE_ON_DEV_NAME to be
"UART_0" all over the place as its default is "UART_0" already.
So remove those duplicate defaults.
Change-Id: Ia86e26b8f90540fdbd7dcb3358d6dac352648b21
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The IRQ triggering condition should be specified by SoC as it is
a decision for hardware design. This should not be configurable
in kconfig.
The default is to be triggered on rising edge, just as the same
old kconfig did.
Change-Id: If59d88a30711eb8e03d9cc4f409055cefe1995c5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Moves those kconfig options which should be declared in
SoC or board header files instead. These are the one
that are tied to SoC or board and there is no need
for them to be configurable in kconfig.
Change-Id: I243d634f1a4a11dc8dc3530d95f93371015492b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
lp_count register can be store directly to memory, it is actualy done,
and the instruction that precedes it has no effect.
Change-Id: I8b8fee6abd6f08eea38dd1ab5bbe61c25a2a1f7d
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
ARC CPU has stack checking feature that allows to trigger an exception
whenever the stack is incorrectly accessed.
This patch implements the stack_top and stack_base register updates on
context switches, and activates the Stack Checking bit of STATUS32
register when the CPU is in the context of a fiber or task.
As GCC accesses the non-yet allocated stack with frame pointer enabled,
this patch also add the omit-frame-pointer gcc flag in order to work
properly.
Change-Id: Ia9e224085a03bd29d682fb8f51f8e712f2ccb556
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
The base addresses are SoC specific so there is no need to make
configurable via kconfig.
Change-Id: Iaf8444f77513255d5f0112af6710243aae09f066
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most of the #ifdef are not really needed, so clean up the file
for readability.
Change-Id: I4d15f3cb7ef4db9113d4cdadbd3309da6587c64e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is to standardize the kconfig for specifying IRQ priority.
Change-Id: Iab10655c6fc6f17c0c6dd49cb7a4e74fabcf852c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is to standardize the kconfig for specifying IRQ priority.
Change-Id: I3a51b35e633dc7b1b841e9fa504bf0cfc0d4d575
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most of the SoC and board Kconfig use the same values for
driver initialization priorities. So refactor them, and
discard duplicate ones.
The shared IRQ init priority was changed so that the kernel
default init and device init priorities can be standardized
across all SoC/boards. Same goes for DesignWare SPI driver.
This also changes the UART_CONSOLE_PRIORITY and
IPM_CONSOLE_PRIORITY to UART_CONSOLE_INIT_PRIORITY and
IPM_CONSOLE_INIT_PRIORITY, to standardize across all drivers.
Note that this does not take away the ability to override
those values. This just provides reasonable defaults such
that there is virtually no need to override.
Change-Id: Ibbd95d802c637df06f9a2fd48763ee1e6f4ff627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The pinmux base address and number of pins are now defined in SoC or board
header files instead of specifying them in kconfig. This is because
the pinmux ties directly to the SoC (or board expanders) so the base
address and number of pins do not need to be configurable in kconfig.
Change-Id: Ib6090d7d022b491f3fe8f522858281504c6302bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The base address, IRQ line, chip select numbers, and clock
gating constants are static per SoC, so there is no need to
make them configurable in Kconfig.
Change-Id: I9f87ca29c28c38c42d4e4f1a3a41fa231f63ef03
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The base address and IRQ line are static per SoC, so there is no need
to make them configurable in Kconfig.
Change-Id: Ib78401ff136c29642356f5bda9d6cd3e5c98bece
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The UART port base address, IRQ line and clock frequency are static
per SoC, so there is no need to make them configurable in Kconfig.
Change-Id: Ia252958d205e0100d1b92e2a12d4c22411bc94b9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The UART port base address, IRQ line and clock frequency are static
per SoC, so there is no need to make them configurable in Kconfig.
Change-Id: I79b142414143bc5ef585d3136a00375233de1723
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds conditions to the default values for device init priorities,
and make them follow the dependencies on the config options. This cleans
up the resulting .config a bit, making it easier to read.
Change-Id: Ib05806ac6108d465ffe245142ecca7a51be6df22
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the STM32 based boards (Nucleo F103RB and STM32 Mini A15) to
the "new" pinmux model.
Change-Id: I190df271a6b83fafeec0b281cd4ee7cf13d7e7db
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Setting the direction of a GPIO pin is not the responsibility of the
pinmux "board" initialisation. This should be left for the GPIO
utilising application.
Some macros that were only used when setting the pin direction are
removed.
Change-Id: I5b63d52446a27fe539c89f0639a8dcadf5ea9f80
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch replaces all occurrences of DEV_* codes by errno.h codes at
the arch layer.
Change-Id: I1a1ab6d0481f3660ad032e2690d2577245fe1f34
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
CONFIG_PWM is set to "no" by default, so there is no need
to do it in the SoC kconfig file. Also, setting CONFIG_PWM
there causes kconfig to think that CONFIG_PWM depends on
CONFIG_SOC_FSL_FRDM_K64F and gives warnings about
unmet dependencies if the certain combinations of CONFIG
are set.
Change-Id: I0028accfc4b585dcfa87e0d5733b789691a598e3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes this board more consistent with the rest of the code base.
Change-Id: I5641c6358e638a3585d2154e67d3536b11436e01
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Use of `ldr` triggers unaligned memory access when loading SVC
instruction to r0. This is caused by the fact that SVC is a 16-bit
instruction, hence with a 2 byte offset, we are performing an non-word
aligned access. Prevent this by using `ldrh` to load a halfwords rather
than full words.
Change-Id: Ieae60c2ce86c6cfe15c89627d3a450797ce7e714
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add support for use of HSE (incorrectly named PREDIV1)as input of PLL,
along with HSE bypass for stabilized external clock, and XTPRE
prescaler. Update PLL handling so that we do not unnecessarily enable
PLL clocks, instead enabling only the clocks sources that are required
as per user's configuration.
This change allows higher SYSCLK clock values, up to 72MHz.
Change-Id: Ia7c2be3ce11ac0de2efa664b20e7ab5fddd57a51
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add mapping of registers for embedded flash controller.
Change-Id: I81f891551124e9f124ff59dfe0b3c737ec5b3b63
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Before moving pinmux related code to 'drivers/pinmux' fix their return
codes to be consistent with the rest of the API.
Change-Id: Ie84f64e93745d44bef8b9d2119f6a05cdc8cb8c4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch fixes the QMSI UART shim driver so we are able to use it in
Quark D2000 based platforms. Differently from Quark SE, the peripheral
clock gate bit (CLK_PERIPH_CLK) is not enabled by default in Quark
D2000. We have to explicitly set this bit in order to properly initialize
the device.
Since this drivers is now properly working on Quark D2000, this patch
also sets the QMSI driver default options in arch/x86/soc/quark_d2000/
Kconfig.
Change-Id: I817b7703554be162ac628dcd8d3d07512b9eb3f5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add a driver for Independent Watchdog (IWDG) commonly found in STM32
MCUs. The driver has been tested on STM32F1 family MCU.
Change-Id: Idc6ac35990e46901a206b4af0ce3767eb4875de9
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add necessary integration for supporting interrupts on GPIO input pins
for STM32F1 line of MCUs.
Change-Id: I0526a85cc3fdb96891c93ba4840ef27d613ab31b
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add mapping of Alternate Function I/O (AFIO) registers for STM32F1 MCU.
Change-Id: Id3e12290d6869c1f0506549f21407b3cd80d0a64
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Introcuce a driver for External Interrupt/Event Controller (EXTI) found
on STM32 MCUs.
Change-Id: Ib206521fcc51b5dfaaf5dea9d436f8304f3a36be
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a list of symbolic constants for IRQ lines available on
STM32F1 line of MCUs.
Change-Id: Iebf1847719c0db31cf852529fe5876e3cabbfe52
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add necessary integration code enabling use of common STM32 pinmux
driver.
The alternate function listing currently consists of USART1 pins
only. The listing should be updated when support for more devices is
added.
Change-Id: Ic65aeea9df9aaea7636ecdd6996f56e6ef59dc2f
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add functions required for integration with common STM32 GPIO driver.
Change-Id: Ic6637e991f5c0cf659f3b927ed47ef482b13b64f
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
() Moves the Quark SE clock control into its submenu.
() Fixes the dependencies in the SoC default Kconfig
so the options are not displayed out of place in
menuconfig.
Change-Id: Ifdf06242be8ceed03c2c657c942875a5a7f2750e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make kconfig look the same for all architectures.
JIRA: ZEP-107
Change-Id: Ia8100194ec333fc07a1dff4f6f90364ce8bef4d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
