This commit removes the unnecessary asm inline header for ARM.
It also adapts the stack.h and exc.h to use the ARM CMSIS inline
functions to access the IPSR and MSP registers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit conditionally selects the ARMV7_M_ARMV8_M_FP option
in ARMv7-M/ARMv8-M Mainline processors, when the Floating Point
Extension is implemented (CPU_HAS_FPU is selected).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the Stack Overflow UsageFault dumping
for ARMv8-M implementations that support the Main Extension.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the ARMV8_M_MAINLINE K-config option. The
option signifies the use of an ARMv8-M CPU supporting the Main
Extension. ARMv8-M Main Extension includes additional features
that are not present in the ARMv7-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit forces CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS to
depend on ARMV7_M_ARMV8_M_MAINLINE. This allows the user to get
a build warning if he manually selects
CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS for a CPU that does
not implement either ARMv7-M or ARMv8-M Mainline.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move IRQ numbers into device tree so we can remove soc_irq.h. We are
already using IRQ defines generated form the DTS so no point in having
soc_irq.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Further simplify the mps2 SoC code by removing soc_memory_map.h which
now only contains one define for the FPGAIO_BASE_ADDR. We can just move
this to the once place its used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added device tree support to the ARM SBCon I2C controller. We utilize
the compatiable "arm,versatile-i2c" the binding from Linux for the some
peripheral block.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up Kconfig so each SoC just selects the specific Cortex-M
implementaiton rather than having to select both CORTEX_M and
CORTEX_{M0, M3, M4, etc.}.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the missing fault dumping for MemManage or Bus
fault occuring during floating-point lazy state preservation. In
addition, it introduces a Kconfig option for the ARMv7-M/ARMv8-M
Floating Point Extension.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macros for ARM fault flags from
include/arch/arm/cortex_m/cmsis.h header, since they are
defined in the respective core_cmXX.h header files. It also
modifies fault.c to use the updated fault macros taken directly
from ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Switch the SoC device tree to define a single entry per SERCOM instead
of one per mode.
Define a Device Tree binding for the SAM0 SPI and use it instead of
Kconfig for enabling / disabaling instances
Switch the Arduino Zero, Adafruit Feather M0 Basic Proto, and
Trinket M0 to use the new defintion.
Add the APA102 LED that's on the Trinket as a test.
Signed-off-by: Michael Hope <mlhx@google.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch reworks the current ARM __swap() function into a C function.
Due to some issues with using svc calls withing fault handlers, we
needed to change the way we initiate a swap by removing the dependence
on svc #0.
Before __swap() is called, the system has already done an irq_lock().
Upon return from __swap(), the equivalent of an irq_lock() is done due
to restoration of the key value from the irq_lock preceeding the call.
For ARM V6M (M0/M0+), the pendsv bit is toggled and the irqs are
enabled. There is no priority masking in v6m, so it's just a global
enable. For ARM V7M, the priority mask has to be set to 0x0 to allow
for the pendsv IRQ to be taken. This is done for both via a call to
irq_unlock(0).
After this unlock, a pendsv irq will be taken, either at the tail end
of the current irq handling if we are in handler mode, or immediately
due to the pendsv being asserted (no other outstanding irqs). The next
thread will be scheduled.
Upon return from the context switch to the original
thread, the priority mask will already be correct due to the pendsv
processing.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
MPU_STACK_GUARD option has a direct dependence on ARM_CORE_MPU.
Therefore, it is not required to have a conditional selection
of the option (if ARM_CORE_MPU) in ARM_STACK_PROTECTION.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARMv7-M (and ARMv8-M) architecture it is
implementation defined whether separate MMFAR and BFAR are
implemented. This commit ensures that we always get the true
faulting address displayed in case of MemManage- or BusFault.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move common SoC dts.fixup defines into arch/arm/soc/<SOC>/dts.fixup so
we remove duplication in the boards and only have board specific
defines in boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/atmel_sam/<BAR>/dts.fixup so we remove duplication in the
boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/arm/soc/nxp_imx/rt/dts.fixup
so we remove duplication in the boards and only have board specific
defines in boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/nxp_kinetis/kwx/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/nxp_kinetis/kl2x/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/nxp_lpc/lpc54xxx/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/nxp_kinetis/k6x/dts.fixup so we remove duplication in the
boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/ti_simplelink/<BAR>/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add SPI fixup defines on STM32 SoC family level for all SPIs that
are supported on one or more SOCs of that SoC family.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The old ARMV6_M Kconfig option has been removed, and so to correctly set
the dependencies for SW_VECTOR_RELAY we need to use the new
ARMV6_M_ARMV8_M_BASELINE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch fixes a hole in the stack guard configuration. The initial
branch to main is missing the stack guard configuration.
Fixes: Issue #3718
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes calculations for the top of the interrupt and main
stacks. Due to power of two alignment requirements for certain MPUs,
the guard size must be taken into account due to the guard being
counted against the initial stack size.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for userspace on ARM architectures. Arch
specific calls for transitioning threads to user mode, system calls,
and associated handlers.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds a configure_mpu_user_context API and implements
the required function placeholders in the NXP and ARM MPU files.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Atmel SAMD21 series was classified too broadly as SAMD.
This patch names it correctly to make room,
for other members of SAMD series
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
Also pull out the SERCOM pads configuration to defines. Note that the
SAM0 has a two level configuration - a signal (like TX) is mapped to a
pad, and then a pad is mapped to a function on a pin.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit defines the Kconfig options for
ARM Cortex-M23 and Cortex-M33 CPUs. It also
udpates the generic memory map for M23 and M33
implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This PR includes the required changes in order to support
conditional compilation for Armv8-M architecture. Two
variants of the Armv8-M architecture are defined:
- the Armv8-M Baseline (backwards compatible with ARMv6-M),
- the Armv8-M Mainline (backwards compatible with ARMv7-M).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Whenever a Cortex-M0+ supports the VTOR register it makes no sense to
use the software vector relay mechanism. Therefore change the logic so
that SW_VECTOR_RELAY does not get enabled whenever a VTOR register is
present, but enable it if an M0+ has no VTOR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch adds the generation and incorporation of privileged stack
regions that are used by ARM user mode threads. This patch adds the
infrastructure for privileged stacks. Later patches will utilize the
generated stacks and helper functions.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
