The GPIO and AON GPIO ports are available to both the x86 and ARC
cores, but the driver always assumed only the x86 at the time of
configuring interrupts.
Use the available macros to set the correct values independently of
which core it's being built for.
Jira: ZEP-1030
Change-Id: I310afcc48780fbe1cac9dc3368a6de11bd797fda
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The SoC level peripherals are accesible by both cores, while the SS
ones are only available to the sensor subsystem. Since the ARC core can
make use of both drivers at the same time, we need to be able to
differentiate their configuration values somehow.
Also disable the SoC GPIO for the ARC by default, as it still needs
more changes to be usable.
Jira: ZEP-1030
Change-Id: Ic5415c404ecd32a3e560467b6f5eaa873a515d72
Signed-off-by: Iván Briano <ivan.briano@intel.com>
IRQ numbers differ between x86 and ARC, as well as the bits that need to
be touched in the interrupt routing masks. QMSI abstracts some of it and
for the rest we do have the information needed.
Add a macro to select the right IRQ number based on which core we are
building for.
Change-Id: I3e6680d10a0a23c98777d2831efe6819fcb54162
Signed-off-by: Iván Briano <ivan.briano@intel.com>
We can derive NUM_REGULAR_IRQ_PRIO_LEVELS by subtracting 1
from CONFIG_IRQ_PRIO_LEVELS if FIRQ is present (which is currently
always the case). If FIRQ is not present, the value will be equal
to CONFIG_IRQ_PRIO_LEVELS since all interrupts will be regular.
Change-Id: Ibefc939e3771bf0adf712127db0d36cb49bf732b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Gets rid of unnecessary THREAD_MONITOR_INIT() macro, to be
consistent with the approach taken by _thread_monitor_exit().
Aligns x86 code with the approach used on other architectures.
Revises the associated comments and removes unnecessary
doxygen tags.
Change-Id: Ied1aebcd476afb82f61862b77264efb8a7dc66c9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- the interrupt (both regular and fast) now does not do rescheduling
if the current thread is a coop thread or if the scheduler is not locked
- the _nanokernel.flags cache of _current.flags is not used anymore
(could be a source of bugs) and is not needed in the scheduling algo
- there is no 'task' field in the _nanokernel anymore: scheduling routines
call _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- thread initialization initializes new fields in the tcs, and does not
initialize obsolete ones
- nano_private includes nano_internal.h from the unified directory
- The FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- the 'fiber' and 'task' fields of _nanokernel are replaced with an O(1)
ready queue (taken from the microkernel)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
Change-Id: Ib9690173cbc36c36a9ec67e65590b40d758673de
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
EM7D was recently merged, and one change suggested there was
to remove conditional checks for NSIM. It is OK to have the simulator
use the exact same memory addresses and sizes as would be found on the
board. This submission fixes EM9D and EM11D to be the same -- i.e.
to not have NSIM conditionals.
See ZEP-966.
Change-Id: Ia990ff7bb4b7ff5071af83723ed3d1420fdff012
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The EM7D SOC is similar to EM11D, except it has different sized
iccm and dccm memories, and also has FIRQ with RGF_NUM_BANK==1.
To select this SOC on the board, all dip switches are in the up position.
See ZEP-966.
Change-Id: I864ffe0efdf367de0a8cd58e9c46efd7e401c671
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
For the EM Starterkit, one SOC I will soon be adding is EM7D.
This SOC has FIRQ, but only has one register bank.
Thus the interrupt handling for FIRQ needs to be different
when CONFIG_RGF_NUM_BANKS==1. The handler must instead push
registers onto the stack in the same stack frame layout that RIRQ uses.
This allows for context switch to be easily done since its compatible.
The common interrupt entry point _isr_enter must save r0 before using
it, because in the FIRQ 1-bank case, it would be destroyed otherwise.
So a global variable named saved_r0 has been added for this reason.
The stack cannot be used to save r0, because it first has to determine
whether its FIRQ or RIRQ here. This change has been tested on the
EM Starterkit with EM7D SOC changes -- coming soon. To make the review
easier, these 3 files are submitted first.
Also, exceptions will no longer use the _firq_stack.
This stack is not needed in the 1-bank case, but an exception stack
is needed. I've added a new stack called _exception_stack,
and made it be 512B, which should be enough for one exception.
See ZEP-966
Change-Id: I6f228b840da7c4db440dd1cfef4ae25336c87f0d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The code density registers are NOT saved on the stack.
This is controlled by bit 13 in AUX_IRQ_CTRL, which didn't even have a symbol
defined for it. I've also added _ARC_V2_AUX_IRQ_CTRL_LP for bit 13.
Change-Id: Ie80853b72bed4e60a5cf1cf0a8c905a3d86180d9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In order to add the EM7D SOC, I will be implementing a version of the FIRQ
interrupt handler that saves and restores registers on the stack when
RGF_NUM_BANKS==1. All other ARC SOCs at this time have RGF_NUM_BANKS==2,
allowing for a faster handler that can use the registers in the 2nd register bank.
But EM7D doesn't have this 2nd bank, hence the need for this new configurable choice.
(See ZEP-966)
Change-Id: Ie089f1f079902552cf279c2cda23ee0805b01eed
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
i2c_quark_se_ss driver is deprecated and replaced
by i2c_qmsi_ss. So remove i2c_quark_se_ss definition.
Change-Id: Idcc6a7f01ffae626ae7d5f9966eac67be78599af
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
commit e57b21c78c ("irq: Use lowest priority not a
hard-coded priority 2") introduce a wrong whitespace,
not complying with coding style. Remove it.
Change-Id: Ie7e48843e5da6cb3417773ef8a57cf9a166c70d6
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In this file was found an assumption about how many
priorities are being used. This is configurable with
CONFIG_NUM_IRQ_PRIO_LEVELS, however, so it should be using that
instead. This line of code changes:
or r3,r3,(1<<(CONFIG_NUM_IRQ_PRIO_LEVELS-1))
so as to use the correct bit to OR.
Change-Id: I8c6297e98b5163aa27460a68b203e8a27d1e2506
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Set _ARC_V2_DEF_IRQ_LEVEL to the last legal priority value, and not 15.
The last legal value is: (CONFIG_NUM_IRQ_PRIO_LEVELS-1).
This is safer because we don't want priorites not configured to be
enabled.
Change-Id: I1689cc00aa7e707a204d16ec17d7f396566e8638
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
No need to create new Kconfig that do exactly the same, just
reuse those from the main QMSI driver.
Change-Id: I965055f36845ac0464e4a383b0d05c3ae35c0015
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ARC side should use the same console UART as x86 by default if we
want identical behavior.
Change-Id: I067860581cfd93d97ffad3d8f0bc5591f555e3ce
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change the signal ramp up/down config parameters in i2c driver
module to SoC specific.
Jira: ZEP-753
Change-Id: Ie01f1d890a7133d30ea53eee07f60354734a8571
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These files were almost exactly the same and had already started
bit-rotting (note the missing net_l2 section in linker_harvard.ld)
Issue: ZEP-528
Change-Id: I5039a2c1b86c5764a361b268c33ae8b17da1a9e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Defined in all SoCs, but never referenced anywhere. That definition has
been replaced by CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Change-Id: I1801f72a03925717ded6fbfdef22b1993f843461
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
0 should be fine; no need to make this an FIRQ or non-maskable
Change-Id: Ifdf89a72e4864a2c2bbd83752cd814e2cb9aa16e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The GPIO and UART drivers were failing to build due to some
missing soc.h defines.
Change-Id: I6811e3699449da0a61ccc8376a8e11b96ad7a4e5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_SOC_GENERIC_ARC doesn't exist so remove it.
Change-Id: Idecfd27684b5fd83b7b296daa46a1a21a0ae4d95
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Arches now select whether they want to use the GCC built-ins,
their own assembly implementation, or the generic C code.
At the moment, the SDK compilers only support builtins for ARM
and X86. ZEP-557 opened to investigate further.
Change-Id: I53e411b4967d87f737338379bd482bd653f19422
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The comments for INT_ACTIVE and EXC_ACTIVE now refer to
"executing context ..." for all architectures.
Change-Id: Ib868958639a3b30e1814fcaa4d1f0651d3b2561e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are a few problems with the code being repaired here.
1. A seti was used to re-enable all interrupts, even though the
thread being switched to may have had certain interrupt priorities masked.
2. saved status32 already has SC bit if thats wanted, so its ok to just
restore status32 as-is w/o needing to and off anything.
3. the code is difficult to write using kflag and seti because as you
restore registers, there aren't any to use. But we can exploit a
trick where we pretend an interrupt has occured by setting a bit in
AUX_IRQ_ACT, and then use RTIE instruction to restore status32
atomically with branching to return address. Something about the way
this code was written was causing stack corruptings and crashes in an
application that uses a high rate of both FIRQ and Regular interrupts.
Change-Id: Ia7166d51f0e750c07832ab115b7151ce37ee0278
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Since firq utilizes a 2nd register bank, and since all of those
many GPRs can be used, the strategy here is to save extra registers,
such as lp_count, lp_start, lp_end into callee saved registers.
These registers are safe to use because the C-ABI followed by the
compiler will cause these to be spilled to the stack if a C function
wants to use them. By selecting upper GPRs, r23-r25, it is very unlikely
the compiler will spill them. This improvement, therefore, can avoid a
d-cache miss since we are avoding memory altogether when saving these.
The struct firq_regs is no longer needed.
Change-Id: I7c0d061908a90376da7a0101b62e804647a20443
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
It was found that the test latency_measure, when compiled
for microkernel, would fail on the ARC. This because the
trap handler, used by irq_offload, wasn't supporting thread switching.
This submission adds the code to do that, and the code size is
bigger only when CONFIG_MICROKERNEL is defined.
To keep code a bit smaller, there is a trick exploited here where
the AE bit is cleared in the STATUS32 register and in AUX_IRQ_ACT,
bit 1 is set, to make it appear as if the machine has interrupted
at priority 1 level. It then can jump into some common interrupt
exit code for regular interrupts and perform an RTIE instruction
to switch into the new thread.
test/latency_measure/microkernel now passes.
Change-Id: I1872a80bb09a259814540567f51721203201679a
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Introduce a soc-cflags, soc-cxxflags, and soc-aflags as a means for
SoC specific compiler flags to be set without manipulating Kbuild
options directly.
Change-Id: I2c8f5019fb237429e59717ef96bd4251a61dc1a5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The .nd on a branch is WRONG if its an unconditional branch. Not needed.
On conditional branches its a compiler feature that is not yet functional
with ARC targets. Typical code for this compiler can use .d to put
something in the delay slot of an instruction, but using .nd is probably
never wanted.
Change-Id: If1017c468e6e7af269ea73daeb4bc223dcc0059f
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add missing Kconfig files and connections to expose Kconfig options
in ext/ directories. Fixup QMSI to only be exposed on platforms that
utilize it.
Change-Id: I6c6c5011b2bf2966f65aa8279dc594a244821956
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ARC CPU comes up from reset with i-cache enabled.
It can have garbage in it from a previous run.
The fix is to check the build register for the i-cache, and if its
present, invalidate it fully, and then disable it.
_icache_setup() is called later to turn it on.
Change-Id: I26fae915153841c61e9530d5af2ddb9d0553275b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
EM11D is a ARC CPU configuration that can be selected for the
ARC EM Starter Kit. The board support for this board will be
submitted separately to expidite review.
Change-Id: Ifc4d48e1f5e01d44d1706e6426bd3b2d77ebe2f8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
EM9D is a ARC CPU configuration that can be selected for the
ARC EM Starter Kit. The board support for this board will be
submitted separately to expidite review.
Change-Id: I2c85bdab6ea7bfb257e94e4c72b11b4568dbac19
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Move away from native driver and use the UART driver provided
by QMSI.
All peripherals on Quark MCUs will use QMSI drivers developed
specifically for Quark and optimized for this MCU line.
Change-Id: If4e27f38736849ea3e12c269886e2a03d957b671
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: Icd301b6c044280b5b25d719b6dcc16d556a2ea8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: I1340ba8930fc8676f7b706540a105250ce3e51b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: I1776178ad6fb984d6e293dbfa8bb1d718e4c2566
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
My boss is asking me to add "all rights reserved" to synopsys banners.
Change-Id: Id74bf3cd0be6bc3159a8b687a37eb11fa3a49f3e
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
When using the Synopsys DesignWare Synchronous Serial Interface (SSI),
the FIFO depth can vary from 2-256, depending upon how this module is built.
For quark_se_ss, it was using a depth of 8. For EM Starterkit, it will be
32. Adding this now as a configurable option. A larger FIFO really helps
reduce SPI interrupts.
Change-Id: Id2bc8470bfc08ab447d38b89c7904cff010c63bd
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
In fault_s.S, changing the word "save" to "safe".
Change-Id: Ia997082a62bf287f09a72b7f0a00d506bd982770
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I962ce36b7e2361ea77ae4178bb7c86c19a241c4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some ARC targets can have a data-cache. Although there is no special
instruction to clear exceptions during early init, it is necessary to
invalidate the d-cache BEFORE any data is fetched. The ARC on arduino 101
doesn't have d-cache, and will thus skip this d-cache invalidate.
Also, it is important to set the vector table base register to point to
the interrupt vector table EARLY, so that if an exception is encountered,
the correct vector table is found. Set this base only if it is found to be
different from the one compiled in to the code.
These initialization steps assure that proper exception handling
is in place during early init.
Change-Id: Ie8b5928e5813e104680a6d6510c85d32dc8ed8f3
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The aux register named _ARC_V2_I_CACHE_BUILD can be read
to determine if the ARC has an i-cache. If it does not,
don't attempt to initialize it because this would cause an exception.
Change-Id: I3ff519befcc5ebb7745b58401f12cf3015a9e2e9
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The lr and sr instructions cause a pipeline bubble. There is an efficiency
to be gained if pairs of lr or sr instructions are done right next to
each other. This can avoid some stall cycles.
Also, r14 and r15 can be used with isa-16 instructions.
Change-Id: I4165365b49da910db31e0699a1a6e47114962942
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC SOC implementations will need CONFIG_HARVARD so as to
select a different initial stack pointer (one at the top of DCCM memory),
and also to select a different linker command file that uses
ICCM and DCCM. Quark_se_ss will have HARVARD equal to n.
Change-Id: Idb7c4126866c9604e1924200ad5fdd2bc9d28269
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By using isa-16 instructions, a bit of code-size can be saved,
and code can be a little faster.
Change-Id: I0567d8274372748f579610e2bd4236ce52c5d6c8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Avoids confusion with .gitignore rules, which were inadequate to
cover all the places where these files are found. At least in
VIM, these files are now syntax highlighted correctly.
Change-Id: I23810b0ed34129320cc2760e19ed1a610afe039e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Code size can be reduced by replacing ld and st
with ld_s and st_s (if target registers are r0-r3).
Change-Id: Ia70f0aff07fe41a0cfeff2d59dcdadf7c88e1ae8
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
code-size optimization to use small-variant loads/stores with %r13w
Change-Id: Ic9b2b7744f7d465bccb1e59f64e621985ae7d04d
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
There is a BUG here in that the alias for __start was
aliased to the start of the vector table. Yet, on ARC CPUs,
the vector table CANNOT be the entry point, because there
is no code in a vector table. Only addresses appear in each vector.
Thus, the reset vector, at offset 0 in this table, is a raw address.
The top Makefile in zephyr sets the lable __start to be the entry point
like this: -e __start. Debuggers, for example, use this entry point
to know where the first line of code is.
Also, in KConfig, there were duplicate NSIM blocks. One has been
removed.
Change-Id: I480be7d338a8b45b8ea6ef3f55ac2e6c43829452
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fibers initialize this back pointer to NULL as they are (by definition)
not microkernel tasks. Microkernel tasks initialize it to their
corresponding 'ktask_t'.
However for nanokernel systems, the back pointer is always NULL. This
is because there is only one task in a nanokernel system (the background
task) and it can not pend on a nanokernel object--it must poll.
Change-Id: I9840fecc44224bef63d09d587d703720cf33ad57
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds a back pointer to the microkernel task to the TCS when
configured for a microkernel. This is a necessary prerequisite
to support microkernel tasks pending on nanokernel objects.
Change-Id: Ia62f9cf482ca20b008772dad80cbfd6acb6f5b7a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We really should have more faith in the compiler, it generates
code to implement this exactly like the arch-specific assembly
versions, and on ARM is actually 4 bytes shorter.
FUNC_NO_FP used to disable the usual C preamble to update the
frame/stack pointers, which is how the sizes are still the same
or less. It's debatable how useful the occasional use of
FUNC_NO_FP is in practice since it hinders debugging and in a
production build frame pointers should be globally disabled, but
we can address that later.
Change-Id: I6c4b64ab3e3a9b6f91d52fa8c92e6e79a986fc77
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I am working on porting Zephyr to ARC EM Starterkit. This board has ARC
CPUs with ICCM memories. On quark_se_ss ICCM is missing and ignored.
Change-Id: Ic49fc8ef3e6ad879ffc673b8baf34dd467f76c04
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SOC_FAMILY and SOC_SERIES to identify soc families and series
and to point to the correct linker files and files related to a
specific SoC.
Change-Id: I8b1a7339f37d6ea4161d03073d36557a40c0b4a6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Moves those kconfig options which should be declared in
SoC or board header files instead. These are the one
that are tied to SoC or board and there is no need
for them to be configurable in kconfig.
Change-Id: I243d634f1a4a11dc8dc3530d95f93371015492b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
lp_count register can be store directly to memory, it is actualy done,
and the instruction that precedes it has no effect.
Change-Id: I8b8fee6abd6f08eea38dd1ab5bbe61c25a2a1f7d
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
ARC CPU has stack checking feature that allows to trigger an exception
whenever the stack is incorrectly accessed.
This patch implements the stack_top and stack_base register updates on
context switches, and activates the Stack Checking bit of STATUS32
register when the CPU is in the context of a fiber or task.
As GCC accesses the non-yet allocated stack with frame pointer enabled,
this patch also add the omit-frame-pointer gcc flag in order to work
properly.
Change-Id: Ia9e224085a03bd29d682fb8f51f8e712f2ccb556
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
The base addresses are SoC specific so there is no need to make
configurable via kconfig.
Change-Id: Iaf8444f77513255d5f0112af6710243aae09f066
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most of the #ifdef are not really needed, so clean up the file
for readability.
Change-Id: I4d15f3cb7ef4db9113d4cdadbd3309da6587c64e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Most of the SoC and board Kconfig use the same values for
driver initialization priorities. So refactor them, and
discard duplicate ones.
The shared IRQ init priority was changed so that the kernel
default init and device init priorities can be standardized
across all SoC/boards. Same goes for DesignWare SPI driver.
This also changes the UART_CONSOLE_PRIORITY and
IPM_CONSOLE_PRIORITY to UART_CONSOLE_INIT_PRIORITY and
IPM_CONSOLE_INIT_PRIORITY, to standardize across all drivers.
Note that this does not take away the ability to override
those values. This just provides reasonable defaults such
that there is virtually no need to override.
Change-Id: Ibbd95d802c637df06f9a2fd48763ee1e6f4ff627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds conditions to the default values for device init priorities,
and make them follow the dependencies on the config options. This cleans
up the resulting .config a bit, making it easier to read.
Change-Id: Ib05806ac6108d465ffe245142ecca7a51be6df22
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch replaces all occurrences of DEV_* codes by errno.h codes at
the arch layer.
Change-Id: I1a1ab6d0481f3660ad032e2690d2577245fe1f34
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The SoC selections for each architecture are moved to the top level
in menuconfig and xconfig. This makes it more intuitive to select
architecture -> SoC -> then board, avoiding an additional trip to
go into the architecture menu to select SoC.
Change-Id: I57a78a09adfc4bb12423915b6ad14ceb74381a2b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The thread monitor allows to iterate over the thread context
structures for each existing thread (fiber/task) in the system.
Thread context structures do not expose thread entry information
directly. Although all the information can be scavenged from memory
stacks. Besides, accessing the information depends on the stack
implementation for each architecture.
By extending the tcs we allow a direct access to the thread
entry point and its parameters, only when thread monitor is
enabled.
It also allows a task to access its kernel task structure
through the first parameter of the thread.
This allows a debugger application to access the information directly
from the thread context structures list.
Change-Id: I0a435942b80eddffdf405016ac4056eb7aa1239c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
It is semantically identical to CONFIG_SW_ISR_TABLE.
Change-Id: Iff0c47166ee6fb1fd8a0991a67bc863d45c32559
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This scenario is no longer supported in code; the Kconfig
didn't actually do anything.
Change-Id: Ic48bffb5180c4f72bc9c5d85cf18b1072432b951
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch updates some help sections to remove the "ERROR:
Unexpected indentation" messages during hmtl documentation
generation.
Change-Id: Idcdc17727b921b6145f9eb28d85975ceca273ce2
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The app-facing interface for configuring interrupts was never
formally defined, instead it was defined separately for each arch
in their respective arch-specific header files. Occasionally these
would go out of sync.
Now there is a single irq.h header which defines this interface.
To avoid runtime overhead, these map to _arch_* implementations of
each that must be defined in headers pulled in by arch/cpu.h.
Change-Id: I69afbeff31fd07f981b5b291f3c427296b00a4ef
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The deleted defaults cannot be overriden by defaults defined
in SoC's Kconfig file. The number of IRQ priority level was
always one, and this caused some code to be dropped within
the fast IRQ handling code. When the electrons aligned in
certain way, undesired effects were observed (e.g. exception,
faults, etc.) when regular IRQs were mixed with fast IRQs.
Moreover, ARC cores are high configurable on hardware level.
So let the SoC config define these values instead.
Change-Id: I2a338d2efc814c46b0f68ab100fc0f66ae0fb60c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/gpio/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig.
It also moves the interrupt priority definition from the driver's
Kconfig to the platform's Kconfig since it is a platform-specific
configuration.
Change-Id: Id00f7907fa55025011dabce6e282a9623be23831
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Base address registers and IRQs are set in Kconfig.
Set proper SPI default to various quark_se_ss based boards.
Change-Id: Iadaae551f441457bef334f94f68cafa7c3e499d0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though it's an ARC core, Quark SE SS does not follow the same registers
mapping as the official DesignWare document. Some parts are common, some
not.
Instead of bloating spi_dw.c with a lot of #ifdef or rewriting a whole
new driver though the logic is 99% the same, it's then better to:
- centralize common macros and definitions into spi_dw.h
- have a specific spi_dw_quark_se_ss_reg.h for register map, clock
gating and register helpers dedicated to Quark SE SS.
- have a spi_dw_regs.h for the common case, i.e. not Quark SE SS.
GPIO CS emulation and interrupt masking ends up then in spi_dw.h.
Clock gating is specific thus found in respective *_regs.h header.
Adding proper interrupt masks to quark_se_ss soc.h file as well.
One of the main difference is also the interrupt management: through one
line or multiple lines (one for each interrupt: rx, tx and error). On
Quark SE Sensor Sub-System it has been set to use multiple lines, thus
introducing relevant Kconfig options and managing those when configuring
the IRQs.
Quark SE SS SPI controller is also working on a lower level, i.e. it
requires a tiny bit more logic from the driver. Main example is the data
register which needs to be told what is happening from the driver.
Taking the opportunity to fix minor logic issues:
- ICR register should be cleared by reading, only on error in the ISR
handler, but it does not harm doing it anyway and because Quark SE SS
requires to clear up interrupt as soon as they have been handled,
introducing a clear_interrupts() function called at the and of the ISR
handler.
- TXFTLR should be set after each spi_transceive() since last pull_data
might set it to 0.
- Enable the clock (i.e. open the clock gate) at initialization.
- No need to mask interrupts at spi_configure() since these are already
masked at initialization and at the end of a transaction.
- Let's use BIT() macro when relevant.
Change-Id: I24344aaf8bff3390383a84436f516951c1a2d2a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Decisions on compiler optimizations were done on the architecture level,
this does not scale and some SoCs will have different optimization levels
or compiler options needed. Moving this to the SoC makes it easy to optimize
differently when using the same CPU which we use to set the right optimization
now on the architecture level.
For IAMCU platforms, use the right architecture and tuning.
-march=lakemont -mtune=lakemont -miamcu -msoft-float
Change-Id: I458afca5feb9be5de8dcae559d6dcac3c6d6a2a7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Static interrupts rely on a trick where the _sw_isr_table array
is declared with each element in a different .gnu.linkonce
section, initially pointing to the spurious IRQ handler.
When drivers or apps declare their own interrupts, they override
the element with their own containing the real ISR and parameter.
However, this only works if the initial declaration of the
_sw_isr_table array with the spurious handlers is linked last.
App-specific code was being linked later than the core code,
causing static interrupts declared in apps not to be installed
correctly.
If the _sw_isr_table is moved from SOC-specific code to core arch
code, interrupts configured under soc/ should still also work.
Change-Id: Iec7df47386dfbbf2956a807da27dc8aa6e01b268
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enable both controllers by default if GPIO is enabled, providing all the
necessary information.
Change-Id: I5aab00324b10492eefb67e9595da491775cbd95d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such thing as "IA" in Quark SE SS as it is an ARC core. Plus
for this very specific feature it does not require the ARC aux regs
instruction to read/write in the given mask address.
And fixing also the CONFIG_ option to check.
Change-Id: I1f63348ec85f6e006795f7641c912a30fc003709
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is valid only for Quark SE and Quark SE SS, where it requires to
unmask the interrupt for each specific controller. Thus making the
function generic, using the parameter as the specific mask base address.
Change-Id: Iea0a412b8d94a1ab5e1f3e339eaf632eacee5797
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 778d5b11c5327be4b40c7745e9beaecfd6327e13.
This patch has been identified as breaking the build when trying
to manually build non-x86 applications.
Change-Id: I1857745049dfef7193de58737108314b7aae01c5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This converts the i2c_quark_se_ss to use the static IRQ API.
Note that, even with separate config functions for each instance of
the driver, it is still saving both RAM and ROM space.
Change-Id: Ieb555ff281b384d87d8e69f6914878bbee0e2ee9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Decisions on compiler optimizations were done on the architecture level,
this does not scale and some SoCs will have different optimization levels
or compiler options needed. Moving this to the SoC makes it easy to optimize
differently when using the same CPU which we use to set the right optimization
now on the architecture level.
For IAMCU platforms, use the right architecture and tuning.
-march=lakemont -mtune=lakemont -miamcu -msoft-float
Change-Id: I0f77cffe7a139f8b2620935094437d0dfd160dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kbuild system first looks for a Kbuild file, then it looks for
a make file.
Use the Kbuild for object building and leave the Makefile for definding
build options and compiler flags and other SoC related defines.
Change-Id: I0be59bb5ae02a29108a188efbd6f14dcdb7de4ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ARC EM family processors do not support native atomic assembly
instructions (LLOCK and SCOND). Therefore, the assembly version
of atomic functions cannot be used. This adds pure C version of
these atomic functions.
Change-Id: Ic64dd31b0367b6dcf3a46f41c0c7ac2c2ce5eb8d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch moves the CONFIG_STACK_CANARIES check from architecture's
Makefile to the root Makefile since this option is kernel-related,
not architecture-related. This way we avoid replicating the same
CONFIG_STACK_CANARIES check in several Makefiles.
This patch also removes some blank lines from the Makefiles it touches.
Change-Id: I458f92fa6799526c608369d1e56579936bcb196e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The semantics of this value is that it allows for the use of IRQ lines
0 through CONFIG_NUM_IRQS - 1.
Change-Id: I0287da931b06253065f4fba076e9a949dcb3cf53
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Too many entries were being created in this table. It needs to
create indexes starting from 16 to CONFIG_NUM_IRQS - 1, since IRQS 0-15
are reserved for CPU exceptions and are not handled through this
mechanism.
generic_arc was still using the old C-based table which is
incompatible with the static IRQ implementation. An attempt was made
to move the SW IRQ table to arch/arc/core, but linker issues were
encountered and this will be done in another patch.
With CONFIG_NUM_IRQS set to 68 on Quark SE, inspection of binary
with objdump -x reveals that we are generating table entries:
00000000 g O .isr_irq16 00000000 _sw_isr_table
00000000 w O .gnu.linkonce.isr_irq16 00000000 _isr_irq16
00000000 w O .gnu.linkonce.isr_irq17 00000000 _isr_irq17
00000000 w O .gnu.linkonce.isr_irq18 00000000 _isr_irq18
...
00000000 w O .gnu.linkonce.isr_irq67 00000000 _isr_irq67
Which is exactly what we need.
Change-Id: I8ca1682128ae67e2a24642791b7ce31ebca759bf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ARC is an architecture that supports tickless idle in
nanokernel-only systems, and it thus must signal this to the build
system.
Change-Id: I96b0a4e8f78b2ea67d2f1b3384e94a32d8eb80e8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Modified interrupt handling and idle code to enter and exit tickless
idle mode.
Change-Id: I3461ab6dba30003a4317027fc50a3ba07e830015
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CONFIG_NUM_IRQS expresses the total number of available interrupt
lines in the system, and is used to generate a vector table.
On ARC, the vector table is assembled from two parts, _VectorTable
for the first 16 entries (reserved for CPU exceptions), and
_IrqVectorTable for the remainder. The code that creates _IrqVectorTable
was not taking this into consideration and was 16 entries too big.
Change-Id: I676c8534274de8782178f3773bc53a817b89481f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On ARC the IRQ and exception vectors are just one big array of
function pointers placed at the very beginning of the binary in ROM.
Vectors 0-15 are for CPU exceptions, 16-255 for interrupts.
In Zephyr these have been logically split into an execption table
followed immediately by the IRQ table, specified in the ARC linker.cmd.
However, the exception vector table defined in Zephyr had only 14
entries so the IRQ table was misaligned by 8 bytes. This went undetected
for some time as in the default configuration every entry in the IRQ
table pointed to the common demux function _isr_enter().
This patch correctly ensures that the IRQ table begins at address
0x40000040 instead of 0x40000038 like it had been.
Change-Id: I3b548df0dcabeb9d986ecd6a41e593bd02e3bd73
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Causes problems for large values of CONFIG_NUM_IRQS.
Some inconsistencies have been noted in how CONFIG_NUM_IRQS is
used on these platforms, with bugs filed. This patch preserves
existing behavior and has been shown to generate the same number
of table entries for both arches using objdump.
Change-Id: I1d3ac5466978acb56e88a6dc3cbe7cc09431e94d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Let the SoC decide the number of the IRQs. Fixes a bug where
Quark SE gets the default instead of the declared value in the SoC
Kconfig.
Change-Id: I978c923fbe2a0737ace27ec951bc3a46e8976584
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
_IrqVectorTable was renamed to _irq_vector_table
Change-Id: I1488bebc7d8174c08f3ce2dc8bcace6ef567aad6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current gpio_dw_initialize implementation masks the interruptions in the line
dw_write(base_addr, INTMASK, ~(0)) to assign api functions and initialize
interrupt vectors and handlers safely. Immediately after this, the driver expects
that gpio_dw_unmask_int(port) unmasks the interrupts. Without this patch that
implementation is empty for the quark se ss board.
Change-Id: Iac84c8807fcadad8c256c3fcaa4ff624b6337bf3
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Warning comes during compilation about missing prompt, this sets
the prompt for this SoC.
Change-Id: If8b422d6a870eb99c219ab872924875eb04fba0c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On Arduino 101, the sensor subsystem also has access to the two UARTs
on board. So this adds the necessary code to enable them to be used.
However, one needs to make sure only one core has access to one UART
at the same time.
Change-Id: I9f6c203916164d1b48559a9752fb1e4d879d7fa4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
1. Need to unmask interrupts for the sensor subsystem.
2. The GPIO controllers need their clock enabled before they can
start sending out interrupts.
3. Setting up ISR on ARC requires usage of irq_connect().
Change-Id: I633b07292f11e5c5e768fc51fabb70769d407609
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt number for GPIO0/GPIO1 are 20 and 21 respectively.
The old value of 8 refers to the interrupts line on the x86 side
of GPIO controller.
Change-Id: I2e9e061d3506e27cb7b14e0431c3b6201a50aad4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
define CONFIG_PLATFORM only once in arch/Kconfig and set it
for every platform.
Change-Id: I8554bb36d2d15c3ee71fa63dfc3a763ebca956ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Saves an errno per-thread, retrieved via _get_errno(), instead of
changing the value of a global variable during context switches to avoid
a hit to the context switch performance.
Per-arch asm implementations are provided for maximum performance.
Enabled by default, but can be disabled via the CONFIG_ERRNO option.
Change-Id: I81d57a2e318c94c68eee913ae0d4ca3a3609c7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds static irq support for the Quark SE platform for the ARC core.
New linker sections and sw isr table initialization is needed to support
static IRQ.
Change-Id: I82af98a189f5a156e7f1018f3ecdbfa73ad3e6ef
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
IRQ_CONNECT_STATIC takes 6 arguments on other
architectures, but the ARC one had only 5.
Change-Id: I257e8db12582ee2d6f93bba63af9aa597197a53d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use device name to find the UART device for console usage, instead of
relying on an arbitrary index.
Change-Id: Iebe01c9bf392dfee6d8284367f67647f7d47561a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename nsim_uart.c to uart_nsim.c. This is to follow
the driver naming convention.
() Rename functions nsim_uart_*() to uart_nsim_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If015f39a6f6b4fcc65625e6e5f973b4469202f54
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Uses the "trap_s" exception to simulate entry into IRQ context;
offloaded functions run on the FIRQ stack.
Change-Id: I310ce42b45aca5dabd1d27e486645d23fa0b118f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The linker scripts for the quark_se_ss and generic_arc platforms are the
exact same, so extract the contents in an includable file.
Change-Id: I2cb90a6f819b12db77880228e41ff14c9755d59a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initialization level can be one of five predefined.
Init priority is numeric from 1 to 99. If init level or priority
is defined wrong, linker prints out the message and stops.
Change-Id: I165a32ffb668cda983fd48eb2aa7b94998e31a18
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The defauls set in architecture Kconfig are not being overwritten
by the platform, so remove those and rely on platform provided
data.
Change-Id: Ia71d9d14dddce94c29b9ca957b4ed3ae8838d96c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using int for the Kconfig variable to resolve warnings from Kconfig.
Change-Id: If2574753fd5761b59f37a8bccea8c5f6699cb363
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
They a) are unused, b) should not be in board.h, and c) are wrong on
ARC.
Change-Id: Ic40397d9cfcdf314544875f1443618865435d5e7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When building for a certain platform, we have no idea
what architecture we are building for.
We used to specify the architecture alongside the board or platform
name and this was used to find the defconfig in arch/<arch>/configs.
By putting all board configurations we support in one place we do
not have to specify the architecture, just the configuration name.
Change-Id: Ib7e9f63b9a8051714dc207f583fd26ef620497d8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_PLATFORM to only build the selected platform. This
makes the makefile with drop-in platforms, does not need to be
changed for any new platforms.
Change-Id: I21f4bd88b04a7e53bc80b9710b1e7668def4e407
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_PLATFORM to only build the selected platform. This
makes the makefile with drop-in platforms, does not need to be
changed for any new platforms.
Change-Id: I8720ba1501b6e1929bfec294f5bb1c7466d65049
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move platform related data and definition to the platform
directory and include it using:
arch/<arch>/platforms/*/Kconfig.platform
This way we will able to add a platform as a directory of
content without the need to change and Kconfig files.
Platforms can then be included by reference (using repo or
git submodules and does not need to be part of the zephyr
project)
Change-Id: I5e71f5394c22edb346f7d61d9448b8e1c68e1f9b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Adds the following standard symbols to the arc linker scripts:
_image_rom_start
_image_rom_end
_image_ram_start
_image_ram_end
Change-Id: Ib1dfa1dcb85140193557e72536145e74eb3ebb91
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes on using symbol names _image_text_start and
_image_text_end instead of __text_start and __text_end.
Change-Id: I160ed6b4f117483fcffdfa04ce10bd6a5151704a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This was kept around since it used to be necessary for x86, and we
want our APIs to keep partity across arches, but with the x86 IRQ
refactoring this is no longer needed.
Change-Id: Iacd61f4c4d3cc33b4a15bfa083e106ba6d5da942
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
