Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a note for composite (CDC+DFU) device overlay.
Composite device CDC+DFU may not work with Windows OS host.
Windows OS does not send reset after DFU_DETACH request
(does not re-enumerates) and thus make it unable for
the device to restart in DFU mode.
For more details refer to #23337.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The USB audio samples when added didn't have any tests: sections in the
sample.yaml so they would never get build on any platform as part of
sanitycheck. Add the tests: section and limit the samples to build on
nrf52840dk_nrf52840 as that was the intended platform these samples
where initially developed for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
File system support is built into the Bluetooth overlay, but can now
also be enabled independently for other transports.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use a complete identifier, first two parts are section.subsection, then
at least another part for the specifics being tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds USB audio sample to the Zephyr project.
The sample configures one I/O device:
- Headset (2 channels, Fs=48kHz, PCM format)
Input data sstream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds USB audio sample for Zephyr project.
The sample configures two devices:
- Microphone (2 channels, Fs=48kHz, PCM format)
- Headphones (2 channels, Fs=48kHz, PCM format)
Input data stream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Recommend setting up the python-can configuration file before running
the sample Python snippets and remove the GNU/Linux specific comment
from each snippet.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Updates the fat_fs sample documentation to reflect that it can run on
multiple boards, not just the nrf52840_blip.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample yaml to depend on a feature rather than
whitelisting specific boards. This implicitly extends the sample to
mimxrt10{60,64}_evk boards, since they already support the feature.
The only whitelist board remaining is the nrf52840_blip, which requires
a device tree overlay for this sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample to move board-specific configurations to
separate files and support a shared prj.conf file.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This allows mass storage exposure of a littlefs file system,
specifically one on the SPI NOR flash of the nrf52840dk_nrf52840. In
combination with littlefs-fuse this allows a host system to examine
and change the local storage of a Zephyr application.
Note that it is critical that all parameters of the file system match
between what Zephyr is using and what littlefs-fuse is using.
Inconsistencies can produce confusing results where each system sees
different content. The README has been updated with a detailed
example.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop the old redefine-everything-in-a-special-conf approach and put
the customization appropriate for this board into the board directory
where it's handled automatically.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The API call to close the flash area was only invoked when the flash
area was erased. It should be closed in all paths.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Adapt to using new-style device tree macros
for shared memory base address and size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is more a sample than a test, so put it under samples with the goal
of having dedicated tracing tests in the future under tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert CAN to use a chosen node property that is similar to how we
handle zephyr,entroy or zephyr,flash-controller as the means to select a
specific peripheral instance utilized by a subsystem.
Replace references of the form:
alias {
can-primary = &can1;
};
with:
chosen {
zephyr,can-primary = &can1;
};
Replace various macro/define references with either
DT_CHOSEN(zephyr_can_primary) or replace DT_ALIAS_CAN_PRIMARY_LABEL
with DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added default configuration files for nrf5 boards so the sample
is building with expected features for these boards.
Would be greater to use OVERLAY_CONFIG instead of files addition,
but that doesn't work from CMakeLists.txt scope.
fixes#24442
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
During the last refactoring of the sample, CONFIG_MCUMGR_CMD_FS_MGMT
was mistakenly set to n instead of y for the bluetooth transport.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
This sample now supports SMP UDP transport.
Two config overlays have been added for ipv4 and ipv6, respectively.
The sample documentation has been completely revamped to be less
bluetooth focused and more general.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
To prepare this sample supporting future SMP transports, the sample
code is now split into a main and bluetooth file. A common config
has been identified and application specific config is put into
overlay config files.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Fixes: #24158
The shell/fs sample was using APPLICATION_SOURCE_DIR before it has been
defined.
This has now been fixed to use the proper way of overlaying board
specific settings using boards folder.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
