move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Folks found the use of @rststar/@endrststar non-intuitive (wanted to use
@rststart). The "star" was there indicating the doxygen comment lines
had a leading asterisk that needed to be stripped, but since our
commenting convention is to use the leading asterisk on continuation
lines, the leading asterisk is always there. So, change the doxygen
alias to the more expected @rst/@endrst.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Structures to which this applies contain pointers. So the alignment
should depend on pointer width. On 32-bit builds this remains the same.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Doxygen comments can include doxygen-specific markup tags. If other
markup tags are used (e.g., restructuredText) we need to indicate that
in the doxygen comments (via @rststar/@endrststar tags).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit 79672d16 was missing the fact socket layer is putting net_pkt
into a k_fifo. However, it's on receiving side only: at this point the
k_fifo_put is using the k_work area which is then useless at this
point Thus why it did not break anything, as k_fifo only needs 4 bytes
while the k_work attribute takes 12 bytes.
Thus adding a union on the k_work attribute with another new attribute
that describes the behavior.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute was used when net_pkt where queued into a fifo. However,
since the cove to k_work queues (due to the introduction of TC), such
attribute has been totally useless.
Removing it gains 4 bytes in net_pkt structure.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Not in POSIX. Linux man getnameinfo says about it:
"In order to assist the programmer in choosing reasonable sizes for
the supplied buffers, <netdb.h> defines the constants
#define NI_MAXHOST 1025
#define NI_MAXSERV 32
Since glibc 2.8, these definitions are exposed only if suitable
feature test macros are defined, namely: _GNU_SOURCE, _DEFAULT_SOURCE
(since glibc 2.19), or (in glibc versions up to and including 2.19)
_BSD_SOURCE or _SVID_SOURCE."
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It will help to use IS_ENABLED in place of #ifdef in relevant place.
Only struct net_if uses this structure.
In case only IPv4 is used, it will bloat up this struct by 12 bytes.
There are few reasons why this is "ok" in this case:
- On limited rom/ram system it will be unlikely to find a lot of
network interfaces so it should not harm much to raise the size of
struct net_addr.
- If IPv4 is the only enabled IP version, it gains a good amount of
rom/ram to discard IPv6 support so it is fine to steal a bit of this
gain to bloat up a bit struct net_addr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thit will help removing usage of #if defined(CONFIG_NET_OFFLOAD) in
relevant places.
Note that static inlines are used instead of #define foo(...), to keep
the parameter check at build time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce new API function for ieee802154 driver configuration.
Currently this function is used for ACK configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Some ethenet controllers want to strip the VLAN tag from
ethernet Rx frames and feed the packet into proper interface
queue based on the tag. Add this flag to get_capabilities()
to provide VLAN tag stripping feature to the controller.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code (net_buf_simple_init in particular) expects the data buffer
to immediately follow the net_buf_simple struct, so it's wrong to
request any specific alignment for this buffer. In practice this
doesn't make any difference since the net_buf_simple struct itself is
4-bytes aligned and a multiple of 4 bytes, however the extra
__net_buf_align makes it look like its location in memory doesn't need
to immediately follow the net_buf_simple struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If promiscuous mode support is disabled in Kconfig and promiscuous.h is
included the build will fail. The returned errno should be ENOTSUP.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current idea is that we document zsock_* prefixed symbols, refer
to Open Group POSIX website
(http://pubs.opengroup.org/onlinepubs/9699919799/) for normative
descriptions, and explicitly mention bare POSIX name of a function
too (so e.g. users could find it via search).
Fixes: #13397
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add various AI_* flags, similar to previously added flags for
getnameinfo(). All flags specified by POSIX are defined (with
values compatible with Linux), to allow to build existing
software which may refer to them. They can be implemented
gradually, as usecases arrive.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The earlier removal of _ prefix went and renamed this func
and added z_ prefix. This is useless as the relevant macro
is called GPTP_POW2() so call the helper function as gptp_pow2().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace "Note:" to actual @details so it appears properly formated in
generated documentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Its behavior varies whether overwrite bit is set or not, so detailing
this more carefully.
Fixes#14093
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We are reverting the changes in commit
55b3f05932 given build errors are seen
when fcntl.h is included, as it declares fcntl() as a non-static
function. The same function cannot be declared as both static and
non-static.
Instead, we avoid redefining fcntl() in lib/os/fdtable.c specifically
for case of the SimpleLink family, til we have support for the new
socket_op_vtable.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This reduces net_pkt structure size.
Moving sent_list attribute for better alignment.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This parameter was removed from net_context already thus applying the
change also on net_offload API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute, in case CONFIG_NET_STATISTICS is enabled, made sense
when L2's send() function did not return the length of the sent packet.
But now, it's a superflous optimization as is it used only to set the
stats on recv or send, where net_pkt_get_len() can be used directly.
This helps to save 2 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Seems like a useless attribute. Since net_context is not being used by
the user directly (socket is the unique interface now) and since no core
parts uses the token parameter of net_context API: let's remove the
attribute.
This helps to save 4 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That function was responsible for allocating new buffer element, but it
is now unused and can be removed safely. Buffer allocation is now done
via net_pkt_alloc_buffer().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for these anymore: all is dictated by the position of
the net_pkt's cursor now
- actual cursor position is like the former appdata attribute
- net_pkt_remaining_data() is like the former appdatalen attribute
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Former net_context_send/sendto and net_context_create_ipv4/ipv6 are now
unused and can be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make descriptions a bit more clear, emphasizing the primary
operation, and de-emphsizing (but still describing) prerequisites
and side effects.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To save binary size, currently just returns textual name of error
code, e.g. EAI_FAIL -> "EAI_FAIL". Based on real usecases, can be
replaced with user-friendly message later. (Current usecase is to
allow/help to elaborate sockets API by proof-of-concept porting
existing socket apps).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
select() is a rather peculiar construct, defining/depending on many
types and symbols. Making that to coexist with POSIX subsystem is
an ongoing challange. To facilitate that, let's split those
definitions to a separate header (which e.g. can be included without
including all the rest of socket defines).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is meant for very particular use case as only logging uses that.
Where it makes entirely sense for it to send the logs through its own
slab/pool in order to not drain the core slabs/pools.
So enabling the new API to manage that. That has to be used with
net_context for the buffer pool. So one has to first allocate the
net_pkt from external slab, set the context and then (and only then)
allocate buffer. Basically, only net_context will uses that scheme
anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Though core system is able to manage packet timestamping internaly (gptp
requires it for instance), it might be necessary to enable/disable
packet timestamping from net context directly.
Currently this will be only used by the tx timestamp test. So this
support is disabled by default. (And gptp does not require it anyway).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That can be useful on some tests which will not have any interface but
still allocate net_pkt. Also, one may allocate a packet with buffer not
knowing yet the interface it will be send through.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When compiling with C++ support, a build error occur:
net_context.h: In function ‘net_sock_type net_context_get_type(net_context*)’:
net_context.h:402:75: error: invalid conversion from ‘long unsigned int’ to ‘net_sock_type’ [-fpermissive]
enum net_sock_type t = ((context->flags & NET_CONTEXT_TYPE) >> 6);
Let's fix that using a cast.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This is done to conform with how the rest of the socket APIs are
implemented during socket offload. Otherwise link error would
result due to the symbol being redefined in lib/os/fdtable.c.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The LwM2M public APIs were never well documented. Let's fix
that by adding the needed information to include/net/lwm2m.h
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12958
Signed-off-by: Michael Scott <mike@foundries.io>
If we receive the ARP request, then check if the ARP cache
contains an entry for this IP address already. If it does,
then update the MAC address in the cache.
Fixes#10188
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Following changes done:
* While looking through generated net_buf HTML documentation
I noticed that some of the macros were not documented.
* Removed extern variable declarations from generated
documentation (because those variables were not documented).
* Replaced "/** @brief xxx" by "/**\n * @brief xxx" as
checkpatch complained about them (@brief being in the same
line as the start of the block comment).
* Went through all the block comments and made them look similar
and removed extra space character.
* Removed duplicate lines from function documentations. So
if the @brief text is the same as the detailed one, then the
generated output was looking funny.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These can be used as getsockopt/getsockopt params and required for
compatibility with existing socket applications.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The doxygen comment for ieee802154_radio_api, net_l2 and
net_pkt structs was missing, which meant that no documentation
was generated for them.
Also add comment to "enum net_l2_flags" as that looks better in
the generated html file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Newly added net_context_send_new()/net_context_sendto_new() take
void *buf, size_t len params but in docstring, refer to "network
buffer", which is apperently copy-paste artifact.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The net-shell was using wrong config options for statistics
support. Also net_stats.h had wrong config used for IPv6 MLD
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Ethernet documentation will look better if we place
the MII defines into a separate ethernet_mii doxygen group.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since net_context_sendto_new() does not take a net_pkt anymore, the only
way to set net_pkt's ttl/hop_limit is to pass it through net_context.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No functionality changes, just doxygen additions and some
things are hidden from document generation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The extra check for CONFIG_NET_OFFLOAD is not needed as it
prevents documentation generation for this API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The UDP API functions are for Zephyr internal use only so do
not generate documentation for them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add short overview for DHCPv4. Do not add dhcpv4 library internal
state in the documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function is the opposite of getaddrinfo(), i.e. converts
struct sockaddr into a textual address. Normally (or more
specifically, based on the flags) it would perform reverse DNS
lookup, but current implementation implements only subset of
functionality, by converting to numeric textual address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Following convention, all functions of sockets API have zsock_
prefix, then optionally aliased to bare POSIX names.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The doxygen documents must be placed before the symbol in order
them to be shown in the generated documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
shutdown() itself is described as just marking RX or TX path of a
socket as not available. For the first approximation, we implement
it just as a dummy function, to allow build existing POSIX
applications which use it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Initial implementation of IPSO Timer object #3340
Based on: http://www.openmobilealliance.org/tech/profiles/lwm2m/3340.xml
"This IPSO object is used to time events and actions, using patterns
common to industrial timers. A POST to the trigger resource or On/Off
input state change starts the timing operation, and the timer
remaining time shows zero when the operation is complete. The
patterns supported are One-Shot (mode 1), On-Time or Interval
(mode 2), Time delay on pick-up or TDPU (tmode 3), and Time Delay
on Drop-Out or TDDO (mode 4). Mode 0 disables the timer, so the output
follows the input with no delay. A counter is provided to count
occurrences of the timer output changing from 0 to 1. Writing a value
of zero resets the counter. The Digital Input State resource reports
the state of the timer output."
NOTE: Only One-Shot Mode (mode 1) is implemented in this patch.
Signed-off-by: Michael Scott <mike@foundries.io>
During the initial work on LwM2M, the float32/64 code was
basically stubbed out. Float32 sent only whole values and
float64 was completely broken.
Let's clean up the OMA TLV formatting code by moving the float
processing code into a separate file: lwm2m_util.c.
Then using public definitions for binary32 and binary64, let's
fix the processing code to correctly fill the float32_value_t
and float64_value_t types.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that legacy net_pkt_pull function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for cloning, no need to
keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will return the amount of data to be read from current cursor
position. This will prove to be useful to remove appdatalen attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now unused anywhere: former net_pkt_get_src/dst_addr where the
only one using it and that has been changed since.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
pkt->buffer is represented by 1+ net_buf. If some are unused, this will
deallocates them.
This situation can happen on TCP where net_pkt allocator evaluates the
header size to its maximum size. Which space might not be (fully) used
in the end. On fixed data size buffer, this might end up by having last
buffer(s) not bein used. So better removing those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will take into account the family and the protocol, as well as
existing buffer occupation, to return the available buffer space that
can be used for payload.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The convention is that implementation of any Socket API function
lives in zsock_*(), and then it's optionally aliased to bare POSIX
name if requested. This convention must be followed to get proper
integration into the general POSIX subsystem.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The transport number is used to pick elements of an array which is
initialized using #if defined macros. Having explicit numeration in this
enum leads to situations where the array index is different than the
enum value.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the value 0 is a valid network interface index, we cannot use
unsigned value for interface index as that would not allow to
distinguish an invalid value. So make interface index a signed
8-bit value which is ok as we do not expect to have more than 127
network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds PF_CAN and AF_CAN protocol family identifiers
that are used by BSD socket CAN support code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
This commit adds basic packet socket support to net_context and
allows application to receive or send network packets in raw
format.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Various defines and helpers for supporting packet sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add ETH_P_xxx protocol types if they are missing. After this
we can use the protocol types when working with BSD sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These will be specifically needed in TCP, as well as being used in
context internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, store the actual next_hdr value and not it's position.
This permits to reduce net_pkt from some bytes.
Such field was unused until now, but it will be soon.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not anymore up to user to provide the pkt. Context will build the
packet according to its metadata and provided buffer and length.
It currently supports only IPv4 and UDP.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These ones would support linearizing non-contiguous area, however
requiring a bit more complex type as an "accessor".
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a cursor into net_pkt. This is used to read/write data in a much
simpler way, for pre-allocated buffers in net_pkt. This avoids API users
to deal with net_buf below directly.
However, to be used - as for the new allocators - it will require deep
net stack core and API changes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These struct net_pkt allocators will give the possibility to allocate at
once the net_pkt and the buffer associated with, taking care of the
header space and MTU relevantly.
This enables to use the variable length allocator from net_buf. However,
it is not yet the default and is set as experimental.
As it is provided in parallel to existing allocators, it has to keep a
slab per-direction and thus a pointer in net_pkt, as well as appdata,
appdatalen etc... Resulting in "bloating" net_pkt. This will be solved
when, finally, former allocators will be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All as static inline functions to let the compiler check the types
etc... And use ARG_UNUSED() always where relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
If the net_context functions are accessed from preemptive priority,
then we need to protect various internal resources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Leftovers from legacy MQTT removal commit, now all traces of the
old MQTT implementation are gone.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is the same as net_buf_pull(), except that instead of returning
the new buf->data it returns the old buf->data. This was recently
discussed in github issue #12562.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When offloading is enabled, a call to inet_pton() results in a call to
zsock_inet_pton() based on its implementation in include/net/socket.h.
This eventually leads to a call to _impl_zsock_inet_pton(), which is
not defined when offloading is enabled.
In this commit, we have chosen to directly call net_addr_pton() in
inet_pton() in the offload case to be efficient, and keep the
implementation as it is when offload is not enabled.
Fixes#12441
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
net_frag_linearize() is just a wrapper for net_buf_linearize(). As
the latter was refactored to never return error, and instead just
return actual copied length, update the former and its usages too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't try to find "errors" in the values of dst_len and len params
passed to net_buf_linearize(). Instead, do what entails with the
common sense from the values passed in, specifically:
1. Never read more than dst_len (or it would lead to buffer
overflow).
2. It's absolutely ok to read than specified by "len" param, that's
why this function returns number of bytes read in the first place.
The motivation for this change is that it's not useful with its
current behavior. For example, a number of Ethernet drivers linearize
a packet to send, but each does it with its own duplicated adhoc
routine, because net_buf_linearize() would just return error for the
natural use of:
net_buf_linearize(buf, sizeof(buf), pkt->frags, 0, sizeof(buf));
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As mentioned in issue #12265, some networking APIs
aren't included in the generated
API docs because doxygengroup directives were missing.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
