Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the BT_LE_CONN_OPT_2M option and update documentation.
This was a misunderstand about the init PHY HCI parameter.
The init PHY in the extended connection create command does not
determine which PHYs are accepted as the initial PHY of the
connection. This is instead determined by the secondary PHY of the
extended advertiser.
The init PHY parameter only specifies which conn parameters are
provided, and since we only provide one conn parameter this option
has no effect.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Attempt to fix C++ error: taking address of temporary array.
According to GCC documentation:
In C++, a compound literal designates a temporary object that only
lives until the end of its full-expression.
Finishing with this recommendation:
As an optimization, G++ sometimes gives array compound literals
longer lifetimes: when the array either appears outside a function
or has a const-qualified type.
But it is probably safest just to avoid the use of array compound
literals in C++ code.
Fix the issue by introducing INIT macros as an alternative, and use
these in the inline functions to avoid the use of array compound
literals in Bluetooth headers.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix detailed API description rendered into text boxes.
API documentation with more that one paragraph must use the @brief tag
to be rendered correctly.
Fix indentation level of '*' in doxygen documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for multiple advertising set. Move the advertising state
flags to be per advertising set and loop over advertising sets instead
of looking up legacy advertiser set or handle 0.
Since it is not certain that the advertising set terminated event can
arrive directly after the connection complete event there is currently
a limitation that there can only be one local identity used by
connectable advertisers at a time. This guarantees that we know
the local identity being used in the connection complete event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch introduces two major changes to the directed advertising
feature of the bluetooth host.
Deprecating the bt_conn_create_slave_le, and removing
bt_conn_le_create_slave which has never been released. This behaviour
has now been moved by to providing the peer direct address into the
advertising parameters.
Introducing directed advertising support for nonconnectable
directed extended advertising, both scannable and non-scannable.
A bug was also fixed in the the directed-adv command in the shell
when the argument "low" was given. The advertiseng parameter pointer
declared with BT_LE_ADV_CONN_DIR_LOW_DUTY was declared in a scope that
was no longer valid when it was used to start the advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix filter_dup and options in union with mixed size integral types,
this is not portable, and causes malfunction on big-endian systems.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add scanner API for extended scanner. This includes the options to scan
on the LE Coded PHY for long range, configuring scan timeout with scan
timeout callback and additional information received from the extended
advertising report.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename filter_dup parameters used for scanning filter options to the
more generic name options, and make scan filter options follow same
naming patters as advertising and initiator scan options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add API for creating and starting advertising sets. This allows to start
and advertising set for a specific timeout or number of events.
The advertising set can be configured to advertise extended data on
secondary advertising channels or advertise on LE Coded PHY to give the
advertiser longer range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Minor header file doxygen fixes:
- Use /** @brief consistently
- Indent all comments to the same level
- Use @note instead of NOTE:
- Align @note text
- Align @return text
- Add /** to documentation comments
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow to get local OOB data while advertiser, scanner or whitelist
initiator is active. If direct initiator is active or the advertiser
is using the random address as a random static identity address then
the function will return error.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update documentation regarding LE SC and OOB to include full name
befor starting to use abbreviations. Rephrase some sentences to be more
clear and add references to Kconfig options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In C++ designated initializers require that designators used in the
expression must appear in the same order as the data members.
In addition, 7-2018-q2-update version of g++ doesn't support
implicit member initialization, so all members must be
initialized.
Signed-off-by: Alexey Eremin <a.eremin.msu@gmail.com>
Rename the scan recv callback info struct so that it reflects that it
is part of the scan recv callback. This will make it consistent with
future plans for advertising callbacks.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document why a privacy-disabled scanner will not notify about directed
advertising reports. This is the default behaviour of the
privacy-disabled scanner. In order to receive the reports the option
BT_SCAN_WITH_IDENTITY must be enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add documentation for why connection objects are still in use during the
disconnected callback and document error code when starting connectable
advertiser with no free connection object available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a way to register listeners for incoming scanner packets, in
addition to the callback passed in bt_le_scan_enable.
This allows application modules to add multiple scan packet listeners
without owning the scanner life cycle API, enabling use cases like
beacon scanning alongside Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
In C99 the construct (T){init-list} is called a compound literal, and
is an lvalue. In C++ it is simply a cast expression to non-rvalue
type, which is a prvalue. In both languages the expression is a
temporary, but in C99 taking its address is well-defined while in C++
it is an error diagnosed as "taking address of temporary".
Headers that may be used in C++ application code must avoid invalid
expressions. Replace all uses of &(T){init-list} in headers with the
functionally equivalent but C++-legal (T[]){{init-list}}.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Move the Bluetooth device address definition out of the HCI header file.
This definition is used by higher layer which should not have to include
the HCI specific header file to get the address definition used by the
host API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the GAP defines and the GAP related bluetooth assigned numbers out
from hci to a GAP specific public header file.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Several advertising options were not being picked into the
documentation due to missing doxygen markers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The string "xx:xx:xx:xx:xx:xx (random-id)" is 30 characters including
zero termination.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change extends the Bluetooth API to support pairing with the OOB
data that are used in the Authentication Stage of the pairing procedure.
The LE Secure Connections specific API for OOB pairing is also added.
The general OOB API should be able to accomodate the LE legacy pairing
later on.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
In order to advertise directed to a privacy enabled central the
initiator field of the directed adv packet needs to set to an RPA.
To instruct the controller to use an RPA in the initiator field own
address type should be set to either 0x02 or 0x03.
Since it is not certain that a remote device supports address resolution
of the initiator address we add an option to turn this on and give the
application the responsibility to check if peer supports this.
Fixes#14743
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Translate HCI error codes to POSIX error codes in order to be able to
distinguish reason of connectable advertising start failure.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
This adds new API fuction to update running advertising data.
It will remove the need of advertising restarting.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
So far the stack hasn't provided any way for the application to access
the existing bonds. This patch adds such an API.
Fixes#10122
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add functionality for setting the host channel classification in
the controller using the HCI command.
This closes issue #9851
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added implementation to the directed advertising API in the Connection
Management module. Introduced a new connection state for this type of
advertising. The new state is symmetric to the connection state used for
scanning.
Added a new advertising option that can be used to trigger low and high
duty directed advertising. Added macros for default values of
Advertising Parameters, which are used to trigger directed advertising.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This API makes it possible to delete an existing identity and to flag
its storage slot as unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new API which can be used to reclaim an identity slot for a new
identity. When called, any previous pairings, connections, or other
data will be cleared, and then a new identity will be generated in the
place of the old one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the storage handling to take into account multiple identities.
We can save a bit of code by using the new bt_id_create() API from
within settings.c.
Also make the treatment of addr & irk parameters to bt_id_create()
consistent, in that NULL is acceptable for both of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This introduces a new advertising flag BT_LE_ADV_OPT_USE_NAME which can
be used by applications to make the stack automatically include the
Bluetooth Device Name in the Scan Response.
The name is also updated in case there is already an advertising
instance using it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses bt_dev to store the name and allow changing it at runtime, in
addtion to that if CONFIG_BT_SETTINGS is defined make the name
persistent.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is quite easy to implement a buggy or security vulnerable
advertising data parser. Provide a helper for this purpose, which uses
the existing bt_data struct which is used for programming the local
advertising data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
