Some versions of make seem to more greedy about how they match
$(notdir %).inc vs $(notdir %).gz.inc. If we put the gz.inc rule first
that seems to deal with the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- syscall.h now contains those APIs needed to support invoking calls
from user code. Some stuff moved out of main kernel.h.
- syscall_handler.h now contains directives useful for implementing
system call handler functions. This header is not pulled in by
kernel.h and is intended to be used by C files implementing kernel
system calls and driver subsystem APIs.
- syscall_list.h now contains the #defines for system call IDs. This
list is expected to grow quite large so it is put in its own header.
This is now an enumerated type instead of defines to make things
easier as we introduce system calls over the new few months. In the
fullness of time when we desire to have a fixed userspace/kernel ABI,
this can always be converted to defines.
Some new code added:
- _SYSCALL_MEMORY() macro added to check memory regions passed up from
userspace in handler functions
- _syscall_invoke{7...10}() inline functions declare for invoking system
calls with more than 6 arguments. 10 was chosen as the limit as that
corresponds to the largest arg list we currently have
which is for k_thread_create()
Other changes
- auto-generated K_SYSCALL_DECLARE* macros documented
- _k_syscall_table in userspace.c is not a placeholder. There's no
strong need to generate it and doing so would require the introduction
of a third build phase.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header could be maintained by hand since there are no inputs
and it only changes if the generating script is modified, but given
the choice to maintain 800-ish lines of extremely repetitive C
preprocessor code, or 100-ish lines of Python, the choice is pretty
clear.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Implement the Read Build Information VS command. This returns a UTF-8
encoded string, which is extendable by the user via a new Kconfig
option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Zephyr VS command that allows a Host to write a public
Bluetooth Address to the Controller in order to allow Hosts to provide
their own public Bluetooth addresses.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If the data parameter in net_pkt_insert() is NULL, then just
insert amount of data but clear the area instead of copying.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User was able to tweak IPv6 hop-limit so introduce similar
feature for IPv4 Time-To-Live value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the caller of http_client_send_req() sets the timeout to
K_NO_WAIT, then the function would still wait for a while before
returning to the caller.
Jira: ZEP-2624
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From section 3.4.5.3 in the Mesh Profile Specification 1.0:
"A node shall implement a Local Network Interface."
Removing the Kconfig option also helps clean up quite a lot of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_net_relay() function needs to allow TTL <= 1 for the local
network interface since that's the code path that locally originated
outgoing packets take.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Specification v1.0, 5.3.3:
"On the PB-ADV bearer, when the receiver has received all segments of
a transaction, the receiver shall calculate the FCS for the received
Provisioning PDU, and if it matches the FCS field in the Transaction
Start PDU, it shall send a Transaction Acknowledgment PDU after
a random delay between 20 and 50 milliseconds."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Mesh specification recommends defaulting to the company ID in the
composition data when no other ID is relevant (e.g. in error cases or
if the app has not provided a callback).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Encrypting and sending a message takes a considerable amount of time
which makes the publication period longer than expected.
With this patch it is possible to pass MESH/SR/HM/CFS/BV-02-C test.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The branch for handling the case when the app has not provided a
callback for health faults was encoding the payload in a wrong way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To avoid signedness issues with some compilers, like icx, use 'char *'
instead of 'unsigned char *' for the at_client buffer.
Fixes#3600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was passing the wrong first parameter to the sdu_len_is_ok()
function.
Fixes#3985Fixes#3984
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was causing only one byte of data to be placed in timeout
instead of sizeof(timeout) as intended.
Coverity-CID: 170744
Fixes#4057
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was accessing wrong neighbor data when it received DAO
message. This corrupted nbr->iface pointer which was clearly seen
by "net nbr" shell command. The corruption then caused random
crashes or hangs when network interface via that pointer was
accessed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the ethernet packet destination MAC address is NULL when sending
IPv4 multicast or broadcast packet, then we must set it as otherwise
we might to access NULL pointer data.
Fixes#1544
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a new state NET_IPV6_NBR_STATE_STATIC which never timeouts
which is required in case of RFC 7668 which doesn't allow publishing
the address:
https://tools.ietf.org/html/rfc7668#section-3.2.3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This wasn't working properly with CONFIG_APPLICATION_MEMORY enabled as
the sections weren't handled in the linker script.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
SoCs outside the Kinetis family can have the TRNG module, so move the
HAS_TRNG config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the RNGA module, so move the
HAS_RNGA config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the FTM module, so move the
HAS_FTM config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Note that 'select HAS_FTM' was previously missing from Kconfig.soc and
is now fixed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the ADC16 module, so move the
HAS_ADC16 config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the LPSCI module, so move the
HAS_LPSCI config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the LPUART module, so move the
HAS_LPUART config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update Cube version for STM32L4XX family
from version: V1.8.0
to version: V1.9.0
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F1XX family
from version: V1.5.0
to version: V1.6.0
Update Patch list, since this version corrects bug 33517
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commit "ext: hal: stm32f1x and stm32f4x: disable i2c HAL"
and "stm32cube: Fix warning when SPI LL API is compiled"
modified stm32cube HAL but this was not documented in
series README file, which makes it hazardous to update
stm32cube packages.
This commit corrects this oversight.
Additionally STM32Cube README file to provide this information
and how to use it
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It makes no sense to respond with Pairing Failed PDU to another
Pairing Failed PDU.
Jira: ZEP-2620
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All moved under tests/kernel/mem_protect to reduce clutter. Many more
tests are coming for 1.10 and 1.11.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move all QEMU related defines to the boards and cleanup xtensa platforms
which were marked to be QEMU capable by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add contribution process for including non-Apache 2.0 components
as approved by the TSC. Include a README template that lists
information requested by the TSC and governing board for review.
Add a brief mention in the CONTRIBUTING link that appears when
submitting a new PR or Issue via the GitHub web interface.
Included an introduction to the process steps that includes using the
zephyr devel mailing list to discuss new components.
fixes#1543
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
It's dumb, because it doesn't really parse HTTP request, just always
sends the same page in response. Even such, it's useful for socket
load testing with tools like Apache Bench (ab) and for regression
checking in the net subsystem.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Because of known issues with Sphinx/Breathe tools we're using to
generate doxygen-based comments for our API documentation, we're getting
a bevy of warning messages written out. As a workaround for our CI
system, we created a filter-known-issues.py script to remove "expected"
warnings from the output.
This patch moves calling that filter script into the doc generation
Makefile so folks making local builds of the docs won't be tripped up by
all the warning messages either. Output of the "make htmldocs" command
is now filtered so only "unexpected" errors and warnings will be shown.
(See https://github.com/sphinx-doc/sphinx/issue/2682 and
sphinx-doc/sphinx#2683i for the Sphinx/Breathe issues.)
Fixes#1527
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add information that static IPV4 address of gateway needs to be
explicitly configured when DHCP is not supported.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
