It's useless now, arduino_101 has proven not working very well with x86
gpios and CC2520 never got to work properly there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only ieee802154 should have been using it, but it ended in various
samples that did not require it anymore once they've been using
net_app. Unlike former samples settings, net_app settings are tied to
net_app, so let's just forget about all of it and silently use net_app.
If something goes wrong in setting net options, it will be a unique
place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is similar to the changes made previously to other network
components: if user selected NET_LOG_GLOBAL, they really mean
they want logging (first of all, error/warning logging) across
the entire network stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Due to timeout checking the minimum lifetime must be 15 seconds,
and we're storing the lifetime as an unsigned short so set the
maximum to 65535.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Callbacks are setup for the following states:
- ENGINE_DO_BOOTSTRAP
- ENGINE_DO_REGISTRATION (first registration)
- ENGINE_REGISTRATION_DONE (subsequent client updates)
- ENGINE_DEREGISTER
In most cases, if a timeout occurs the registration engine goes back to
ENGINE_INIT. The exception is a timeout during client update, which
forces the state machine back to ENGINE_DO_REGISTRATION (skipping a
boostrap).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Sending an lwm2m message is too difficult. It requires pending / reply
and other structures to be configured and set by various portions of
the library. There is also no way to know if a pending message ever
encounters a timeout.
Let's fix this by simplifying the internal LwM2M engine APIs for
handling lwm2m messages:
1. A user calls lwm2m_get_message(lwm2m_ctx) which returns the first
available lwm2m message from an array of messages
(total # of messages is set via CONFIG_LWM2M_ENGINE_MAX_MESSAGES).
2. Next the user sets all of the fields in the message that are
required (type, code message id, token, etc)
3. Then the user calls lwm2m_init_message(msg). This initializes the
underlying zoap_packet, pending and reply structures.
4. Once initialized, the user creates their payload in msg->zpkt.
5. When the user is ready to send, the call lwm2m_send_message(msg).
6. And if for some reason an error occurs at any point, they can free
up the entire set of structures with: lwm2m_release_message(msg).
Included in the refactoring is a timeout_cb field which can be set in
the LwM2M messages. If a pending structure ever expires the engine
will call the timeout_cb passing in the msg structure before it's
automatically released.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a magic reference to 8 for token length, let's
establish a define for MAX_TOKEN_LENGTH and then use it for both
variable definitions and to make sure tokens are valid. Also,
Correct the handling of a special token length value (0xFF) which
lets lwm2m_init_message() know to skip token generation. We were
using a -1 value here previously (on a u8_t variable).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The sanity test script needs to have ccache installed on the Ubuntu
and Fedora developement environments.
Signed-off-by: David Leach <david.leach@nxp.com>
We want applications to be able to enable and disable userspace without
changing any code. k_thread_user_mode_enter() now just jumps into the
entry point if CONFIG_USERSPACE is disabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This includes:
- peripheral drivers
- driverlib (HAL)
- WiFi host driver and porting layer interface headers
See README in this patch for details.
Origin: Texas Instruments cc32xx SimpleLink SDK
URL: http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
Purpose: Provide driver libraries and HAL for TI CC32XX SoC
Maintained-by: External
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
When the net-shell needs to send something to network interface,
it will check if the target address is found in neighbor cache and
then use that network interface. If the address is not found in nbr
cache, then the default interface is used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This app now depends on net_app API, so it must be enabled for all
project configs we have.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some our Zephyr tools don't like seeing UTF-8 characters, as reported in
issue #4131) so a quick scan and replace for UTF-8 characters in .rst,
.h, and Kconfig files using "file --mime-encoding" (excluding the /ext
folders) finds these files to tweak.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
send()/sendto() aren't "front facing" functions, so when user calls
them, context type hopefully should be already validated by other
functions. They are also on critical path of app/network performance,
so getting rid of extra check helps a little bit too. This also
fixes a warning of "err" possibly being used non-initialized.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This used to exist because in earlier versions of the system call
interfaces, an "extern" declaration of the system call implementation
function would precede the real inline version of the implementation.
The compiler would not like this and would throw "static declaration
of ‘foo’ follows non-static declaration". So alternate macros were
needed which declare the implementation function as 'static inline'
instead of extern.
However, currently the inline version of these system call
implementations appear first, the K_SYSCALL_DECLARE() macros appear in
the header generated by gen_syscalls.py, which is always included at the
end of the header file. The compiler does not complain if a
static inline function is succeeded by an extern prototype of the
same function. This lets us simplify the generated system call
macros and just use __syscall everywhere.
The disassembly of this was checked on x86 to ensure that for
kernel-only or CONFIG_USERSPACE=n scenarios, everything is still being
inlined as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The implementation is based on net app API. It sends the request and
parses the server reply by following some suggestions mentioned in the
secion "SNTP Server Operations" of RFC 4330.
The system uptime is used as the transmit timestamp of client request
This lib can work on those devices without RTC.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
The MSYS2 installer does not include an updated version of the package
database, so users need to update it first in order to install all of
the required dependencies. Additionally, the repo must be cloned before
being able to install the Python requirements.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
doc/kernel/overview/changes.rst contains information about changes from
kernel release 1.5 ("Version 1 Kernel") to the combined "Version 2
Kernel" and doc/porting/application.rst talked about how to change
applications using Version 1 interfaces to the Version 2 interface.
This information remains in the online tagged versions of the
documentation, but it's time to remove this from the current
documentation set. (Also removing example porting code.)
Fixes issue #1524
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In Python, if open() doesn't specify "encoding" parameter,
locale.getpreferredencoding(False) will be used as the default,
as explained in
https://docs.python.org/3/library/functions.html#open ,
which may differ from system to system. So, explicitly specify
"encoding" param in open() call.
Also, fix a typo in a comment.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since the Zephyr HCI VS extensions apply to both the Host (using them
for additional functionality) and the Controller (implement the commands
and events), it make sense to make this a common setting in order for it
to be configurable in a way that applies to both.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
