Add BT_GATT_CEP and BT_GATT_LONG_DESCRIPTOR so which can be used by
a task to declare long attributes.
Change-Id: I37a0bb1851b60f3cdfa7e2f00ade70d5c344abbf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Characteristic Extended Properties has 16 bits not 8 bits as value.
Change-Id: I307fd27a6d589d6614829df178ff890301a9b6be
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduce a new callback called flush to bt_gatt_attr to indicate
when and attribute can cache data, the data is automatically flushed if
regular write request happens and in case of prepare write it checks if
flush is supported otherwise return an error, then upon receiving an
execute write it perform flush over the entire database and respond
with result:
< ACL Data TX: Handle 42 flags 0x00 dlen 6
ATT: Execute Write Request (0x18) len 1
Flags: Immediately write all pending values (0x01)
> ACL Data RX: Handle 42 flags 0x02 dlen 5
ATT: Execute Write Response (0x19) len 0
Change-Id: I2c47f962858b8a741bf40509a648fe2cd6755691
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of new guidelines to document the GATT API.
Change-Id: I5544f449e11dd72c68b0efb15bd06db44ec30279
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a connection is made, track its role.
Only peripherial/slave role may trigger update of L2CAP connection
parameters.
Change-Id: I72244581650248c7b020c9e5673b73ce46e7399d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Call attribute write callback taking into account the signature length
so only the actual data is used.
Note: It still don't support validating the signature because that depend
on storing CRSK key.
Change-Id: I93973e2997f57e5715080ef56ad85e0eaf11d0fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This reduces the amount of code necessary to check minimum size and
to generate error responses.
Note that not every response can be generate using this method since in
some cases the handle must be set to indicate what attribute has failed.
Change-Id: I0dde7461d97e451407935d5ec3cbfedf6542d5e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says that CCC shall only be persistent accross connection for
bonded devices:
'The Client Characteristic Configuration descriptor value shall be
persistent across connections for bonded devices. The Client Characteristic
Configuration descriptor value shall be set to the default value at each
connection with non-bonded devices'.
To handle this now each configuration has a valid field indicating if the
configuration is valid.
Change-Id: Id74ac54f5e23a7a0b286f90dbc9af4e9ee966dd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This fix following compilation error if CONFIG_BLUETOOTH_DEBUG_SMP
is defined:
In file included from net/bluetooth/smp.c:44:0:
net/bluetooth/smp.c: In function 'bt_smp_irk_matches':
net/bluetooth/smp.c:681:31: error: 'val' undeclared
(first use in this function)
BT_DBG("IRK %s bdaddr %s", h(val, 16), bt_addr_str(addr));
Change-Id: I3350620f1f7dc929b949b4483178df66dde55198
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This was causing output such as bellow:
bt: bt_gatt_attr_write_ccc: No space to store CCC cfgbt: bt_gatt_attr_write_ccc: No space to store CCC cfgDisconnected
Change-Id: I8aff67b9c4b407e8a2da939c27bea05a597dcf67
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds callbacks to notify app about connection and disconnection.
Change-Id: If8091254d929fe53d12b153e6f216223a8913f2d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This checks if connection encrypt flag is set if attribute requires
encryption and in case the connection is already encrypted return
success.
Change-Id: I8af4e9786b63a21f478b3aa9f6df448d7f5760c5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Respond with an error if attribute read/write return an error.
Change-Id: I9c2f98ac4b73bca5d3714339a47290ca9ae2391b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of the Number of Completed Packets event
handling this FIFO & fiber aren't anymore strictly HCI command
completion related. Rename them therefore to something that more
appropriately describes their purpose.
Change-Id: Ia53dea8b5ec0098459f23918a5483075757d9202
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Number of Completed Packets HCI event belongs to the same category
as the Command Complete/Status events in that it is likely to unlock a
waiter in one of the other fibers. Events which may affect waiters in
this way need to be processed without delay and through a separate
FIFO & fiber to avoid deadlocks.
Change-Id: Ibc2ee2b4f72e2534a8579ad1c36591867e19e6df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After quark UART configuration was refactored it is not working
anymore. Since quark was never an officially supported target just
remove it from the regression tests.
Change-Id: If4bae99f5e0dfecfd3729ac0c42d7fd3d8affa0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The PACK_STRUCT macro will be removed soon and __packed is what all
code should use. Convert all the usages in Bluetooth code.
Change-Id: Id5c724566565f67fa8167b61398c508194ece89b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to make sure we have more event buffers than outgoing ACL
buffers. Currently we allocate 7 + 7 ACL in/out buffers leaving only 7
left for commands/events. Increase the buffer count by two to make
sure we've got 8 command/event buffers.
Change-Id: I4c54aa07019ad9ef262aeecabf151edd60f91b9e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reorganize and compress some of the buffer variable to achieve smaller
struct size.
Change-Id: I1ce711c22844470403b085b0f13e77f762f25262
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
All public headers should be self-contained. Since gatt.h uses the
ARRAY_SIZE macro it should also include the <misc/util.h> header file
that provides it.
Change-Id: I1fea66d10f452e51d9af5f5c6c345b5bb5a92d00
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When reading a characteristic attribute which contain a 128 bits UUID the
size of the elements were counting only the UUID alone not other fields
that are part of the value causing invalid responses to be sent.
Change-Id: I7474531f586ba19788eb9e0ed59555c5d7672176
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This checks attribute permission returning an error in case they don't
match.
Change-Id: I56a85ad594cb1ac535b03cdbceb43af84dc6604f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_DEBUG_HCI_CORE is enabled it causes the following
error:
hci_core.c:514:12: error: 'struct bt_hci_evt_encrypt_key_refresh_complete' has no member named 'encrypt'
evt->encrypt);
^
Change-Id: I1983653eba40b9aea6b19572b39a285883f00450
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We can do centralized PDU length checks and more compact code size
with the help of a handler table where the index maps to the SMP op
code.
Change-Id: Iba69ecc14f452411dfb6b4db7c7a5fd19ba3e51f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes memory leak when buffer is allocated before CCC check, the best
fix is to move CCC check forward.
Change-Id: Ib0492f629a339b576cf811adce47b2f6ab101c33
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For now we don't support key shortening, so set the minimum value
appropriately to 16 bytes. Once key shortening is implemented this
value can be lowered again.
Change-Id: I172d0bf6d04ba4c5eaa7bbf8ae2accfa373eebb5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Devices using LE Privacy are identified by their Identity Address
whenever we've paired and received their IRK. We should therefore try
to look up matching IRKs for advertising responses.
Change-Id: I304108da699ff2506e6cc50bd6c5c053a0db024b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use correct address to string translation.
Change-Id: Ic766147fd6016894c0f60ec57059984887653a15
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This event comes instead of Encrypt Change when we re-encrypt an
already encrypted connection.
Change-Id: I7fe9545e6c58392a34d72f3dd3962c475ebb7871
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When a connection occurs it may have happened with an RPA. If so,
check if there's a matching IRK available and update the connection
address with the Identity Address (stored together with the IRK).
Change-Id: I3d995a35171b514ec1902fce617e8e7d6770e785
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an API to bt_keys for looking up IRKs based on a given RPA.
Change-Id: If9c0569c8d619f9cb2b6174d77c25dd5358db863
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for the SMP ah() crypto function which is used to match up
IRKs with RPAs.
Change-Id: Iaea8397ea401df800259dfab2ce97187aa5e2df6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
