This private API now follows Zephyr OS naming conventions.
Change-Id: I01ee78dcf604be90348384733f67766c11ad234e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: I9991671ee816bc8f5c2f509015e60b554c671489
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This private API now follows Zephyr OS naming conventions.
Change-Id: Ic92cacbcb1adf82946a5828cf60d4d98a95b9d74
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine ChannelCheck4Intrusion() is only used in k_pipe_buffer.c.
Change-Id: Ib478b24f2c8995bb0e1c13bf4ace3cb868887762
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
If LTK for connection is stored use it to start encryption instead
of initiating pairing.
Change-Id: Ia1322b028c1ed132c3678c4ff1b4cba1ada7f50d
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Store EDIV and Rand received in pairing master identification request.
Change-Id: Id495934a04470f098da7d36e933e74fb4f052415
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to store LTK used in further connections encryption
when acting as a master.
Change-Id: I5711d7a9ec5f36add66fbf07e546ebd64ecb3c8b
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
If received confirm is valid and we are master start encryption with
generated STK.
Change-Id: I874b3081b6e4b0b9711ba20ee4b99ff5bfcb5bd4
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds HCI routine to cancel creation of outgoing connection.
bt_disconnect is called to cancel connection or disconnect based on current
connection state.
Change-Id: I462a61308a580bb24aa9a6c398eb7e443b995655
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes sure that keys.c doesn't always have its BT_DBG logs
enabled.
Change-Id: Ia97149f08a448f55a15c3282f72afb23c495b715
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to notify and initialize internal code before going ahead and
notifying external code of a new connection. Also, in principle the
L2ACP APIs for a connection should only be used after L2CAP has been
told the connection exists.
Change-Id: I0c8386b39ca86290da03ed68ad01c007b1c41c10
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds bt_att_send which will be used by GATT client API to send
requests.
Note: bt_att_send can only handle one request at time but once the
requirements are clarified it will probably be extended to support
more requests to attend multiple applications probably using a fifo.
Change-Id: If9e89f7f6f0d3827a7f11c8feb4f1f1045d800be
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_conn_lookup_state looks up for connection with "peer" in specific
state "state". Returns NULL if there is no connection with peer or
connection state differs from the given one.
Passing BT_ADDR_LE_ANY will return the first connection with the
specific state.
Change-Id: Iaa3bb22c9aa31192b8782adb6b11c5051b403758
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This was same as low security and is not needed. This also match
security levels with LE Mode 1 security level from Core Specification.
Change-Id: Ia82e1f4d94c281d7e7f88f03a16a1e34eb49f710
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Until full security level tracking is added just ignore BT_CONN_SEC_LOW
security level.
Change-Id: I38ccf7dca261dc0a2a3d6e58b7398946d8f17771
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Move debug log for connection object lifecycle's reference counter
after such ref is modified.
It then prints the exact value for all changes.
Change-Id: I36855c7f5b70d2b6f3e328a0298b869a7b582fa4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This command will be used to enable encryption when acting as master.
Change-Id: Iaaf1d5b98bfcfcf17a5cc7006a6c40d0905011fd
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds bt_conn_security function that can be used to elevate
security on connection. If device is not paired it will trigger
pairing first.
For now only JustWorks pairing is supported so full security level
tracking is not needed as only medium level is supported.
Change-Id: I6d344f55286a79bd989bd18f852a6859dc8ea96a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
As initiator send pairing random after confirmation was received.
Change-Id: I0ab901a40a0b2118ce69ab8410952766ff2dcd0d
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
When piaring response is received move on to sending confirmation.
Change-Id: Ifae84f7ea6f5a9fe26ca2a5e5b1e1cdde0d388ed
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This make confirm and random use proper addresses depending based on
connection role.
Change-Id: I7b2117b330a6f9cc5c2c781e9c736fadcd52df31
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes it possible to perform these operations without
locking once per-conn locking is added in the future.
Change-Id: I342d55856116d9c87daeda4088b65e78e8ef0768
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This way the stack will generate a proper IPv6 link local
address.
Change-Id: I149d82cf5623f3073b9edc64fe4e426460eb793b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mac address length needs to be 6 bytes because this
test app has no 802.15.4 support. The uIP stack checks
this and expects only 6 bytes mac address in this case.
Change-Id: I1edd340491b4690b5a2cf285c63f90950bbc3ff3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong number of parameters in net_driver.send registration.
Change-Id: I39eda44f0dbc9a5a1d980da3a625ef36946aef19
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
6lowpan HC06 and HC01 compression/uncompression functions are
adapted to net_mbuf buffers. HC06 compression and uncompression
works properly. HC01 adapted to net_mbuf but functionality is
failing due to inproper IPv6 link local addresses. buf pointers
from net_mbuf and couple of net_mbuf calls are removed (which
are not used at the moment and saves memory from net_mbuf).
Change-Id: I2711b71b1b8df2eaac67d69275baf4b62b03f9f6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the compiled files unambiguously so that we are always able
to see what object files are compiled from networking sub-system.
Change-Id: Ia763778e954195502281d63438b7e756adadd8a5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes RPL compile errors if CONFIG_NETWORKING_WITH_RPL is
enabled. The end result is not tested atm so RPL might not yet
work as expected.
Change-Id: I458c20f8f8c7c750cc17f24acf425f244399699d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed for enabling RPL and 6lowpan support.
Change-Id: I87f95a08db2cc874bbe841d9b1456803ab16d75d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The process: label is only used if we are a router so add
ifdef guard.
Change-Id: Ib88d4e4d70b049541480a6e9dd9d68911543ff50
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we do not have Bluetooth IPSP support yet, then assume
that user needs 802.15.4 if 6lowpan needs to be activated
in Kconfig. This needs tweaking later.
Change-Id: I02ab6ebea51fdcacf8d23960e4ca70e777c0da88
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Saves some memory if unnecessary slip functions are not
compiled into kernel.
Change-Id: If2316909b36b12cb4d163a5ca966e2e54f4e1159
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is now possible to fully remove 802.15.4 radio support
from generated kernel.
Change-Id: Ib7cf8f4bb400ae7e298bdc62e3b50b787a2ef06d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
One kb for Rx is enough, Tx needs bigger stack (4 kb) as it
needs to fragment bigger messages and needs more buffers.
Change-Id: Ib0a77dbd627bb3bd2806fa13a24a5869c64b31b2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
One kb seems to be enough for the stack.
Change-Id: Ib1e3a7e97bf7d69ddd4b3028fe7dd6413a0098d4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
